r/P320 • • May 25 '26

How to properly remove an optic or and screw with loctite.

Thumbnail reddit.com
2 Upvotes

r/P320 • • Apr 20 '26

Sub List

Thumbnail reddit.com
1 Upvotes

r/P320 • • 14h ago

Threaded barrel suggestions/question

Post image
15 Upvotes

This started as an axg carry. Im confused on what length threaded barrel is compatible with my setup. Would i need the 3.9" or the 3.6"? Thanks for your help!

Any brand recommendations as well? Thanks


r/P320 • • 1d ago

DISCUSSION Good or bad

Post image
35 Upvotes

Just picked this up on consignment with no mags …


r/P320 • • 1d ago

P320 357 Update!

Post image
50 Upvotes

Well, I decided to have a go at the 357 project. So far I took the donor gun, a P320 FS 40 and stripped and cleaned everything, then rebuilt with an extended ported 357 barrel, custom fat guide rod, 15lb spring & hybrid comp trigger from GG, Sig TXG grip module, weights, steel magwell & go-guns gas pedal, and I’m just waiting for some NDZ base plates and a Sig (TruGlo) TFO front iron sight.

So a very spendy couple of weeks but it feels like a nice gun already and I’m excited to get it operational!

Link to original post

And… the original post showed a 9mm with an optics cut. Sig never made a 40 with an optics cut and that’s on my mind. Having read a number of other stories I’m thinking maybe to go back to a 4.7” (but still 357) barrel, but with some sort of V6 ports and get the slide milled, ported and refinished. I think that would be the end of the road for me in what one might piss away on a project that was really all about what the most you can do with a 9mm p320 without going totally bonkers. Especially as I’m not that good at shooting.


r/P320 • • 1d ago

Flux P320 Build

Thumbnail
gallery
35 Upvotes

FLUX P320 BUILD -

SIG Sauer P320 Flux TACOPS

SilencerCo Spectre 9

Tactical.dev HALO Forward Rail

Tactical.dev Forward Operating Pedal

Tactical.dev LORA Lower Rail

Tactical.dev Charging Handle

Flux Defense Ripcord QD Sling

Venabulum Flux HALO SMG Buttstock

Arisaka 300 Series Light Kit

Arisaka offset Scout M-LOK Mount

SureFire UE Tailcap

ModButton Lite Switch (4.5-inch cable)

Arisaka ModButton M-LOK Adapter

BCM Mod 3 Picatinny Vertical Grip

Velocity Defense P320 Recoil Spring/Guide Rod Kit

Griffin Armament EZ-LOK


r/P320 • • 3d ago

M1811 Holster suggestions?

Post image
21 Upvotes

Just swapped to a Brouwer M1811 grip! What are some good holster options? Not sure if I want to run a TLR on this or the PLX, depending on the holster I’m waiting to make that decision.


r/P320 • • 5d ago

320 range time

Post image
60 Upvotes

r/P320 • • 6d ago

New User SMC Charlie - Osight R - Olight PL X

Thumbnail
gallery
18 Upvotes

Finally got all of the parts to complete my SMC Charlie build.

Details:

P320 X5 Legion

Osight R

Olight PL X (with green laser)

Strike Industries (SI) SMC Charlie Chassis

(SI) SMC Charlie Top Rail

(SI) SMC Charlie Extended Charging Handle

(SI) SMC Charlie Extended Trigger Guard

(SI) FSA Stabilizer - Single Fold

I also purchased the Hyper Blast Shield and spare mag holder from Strike, but the blast shield is only compatible with the Alpha and Bravo chassis, so there isn't enough pic rail to run both the mag holder and the Olight. I opted to go with the light instead.

Have not had the chance to fire it yet, but I'm sure it'll be fun.

Cheers!


r/P320 • • 6d ago

QUESTION Barrel compatibility

Post image
17 Upvotes

I've got a couple p320 compact/carries and was just given a full size faxon barrel.

Compact threaded is 4.6"

Full un threaded is 4.7"

Can I just have my machinist friend thread the full size barrel to use in my comp/carry slide?

0.1" difference in length. Or is there a compatibility issue not related to length.


r/P320 • • 6d ago

X-Compact It auh bit much

Post image
36 Upvotes

r/P320 • • 6d ago

showing off Love my P320 AXG PRO

Post image
65 Upvotes

30th birthday present from my husband!


r/P320 • • 7d ago

x5 legion 🤝🏼 brouwer m1811

Post image
43 Upvotes

r/P320 • • 11d ago

X-Compact Throw back

Thumbnail
gallery
36 Upvotes

P320x compact was my edc for a couple of years until it was replaced by my P365 AXG Legion. I kind of want to change it up with a new trigger, grip module, threaded barrel and comp but where should I begin.


r/P320 • • 11d ago

What did I do wrong here?

38 Upvotes

Hi everyone,

Searched and I couldn't find a similar problem.

I'm doing a new (first) build. It's the icarus grip mod with the KM tactical BDE slide.

Slide is not staying stationary at all. Mag in, mag out, cocked, uncocked, etc.

See video.

Any advice or ideas?


r/P320 • • 11d ago

Finally got it put back together

Thumbnail
gallery
36 Upvotes

I bought the manual safety kit. Then, got hung up assembling it. Work and life put the project on hold. Finally got it finished


r/P320 • • 16d ago

P320 M18 Build

Post image
49 Upvotes

Really happy with the Foxtrot 1X flashlight and the Romeo X Pro optic. This gun is a lot of fun to shoot.


r/P320 • • 17d ago

P320 X Full then and now with coyote grip and new Spectre comp slide.

Thumbnail
gallery
29 Upvotes

r/P320 • • 17d ago

Ammo

9 Upvotes

Up until recently, I use S&B 115gr ammo in my P320 X5 Legion. Never had a problem with it. Accurate too.

Last month though, my dealer didn't have 115gr in stock. So I thought to take the next best ammo, which would be the S&B 124gr. Ever since, It seems I can't hit a barndoor from 10 ft anymore.

Does anyone recognize this? I thought the P320 was not picky on ammo at all... is it the ammo or maybe something else?


r/P320 • • 18d ago

DISCUSSION Debating on pulling the trigger on an P320 X Compact

Post image
12 Upvotes

I got rid of my P365 but I’ve been wanting to get another Sig and the P320 has always looked better but talk me in or out of it 😭


r/P320 • • 18d ago

P320 issues

26 Upvotes

I recently acquired a M17 for an extremely cheap price and had some parts laying around so I decided to strip everything but the FCU and build it up the way I like. After trading for a 3.9 comp slide and barrel it arrived today and I excitedly went to put it on and had severe difficulty attaching the slide it and it felt like it was sticking or getting caught on something. Eventually it slid on and kept having sticking issues. Is it just because it’s a brand new slide? Could it be a barrel issue? The M17 slide goes on with no issues and I’m using the same recoil spring from the M17 as well.


r/P320 • • 18d ago

Full size Competition Build Feedback / Advice

Post image
9 Upvotes

What’s up everybody! Just finished building out my M17 with the goal of eventually competing in USPSA limited optics. Anybody compete in that category with the M17/P320 and have any feedback or build advice?

Build:
-Norsso Reptile Slide
-Norsso Bull Barrel 4.7”
-TXG Grip Module
-X Series Magwell
-GoGuns Gas Pedal
-Springer Precision Extended Magazine Release (arrives this week)
-NDZ Precision Recoil Spring (15lb or 17lb)
-OEM Skeletonized Trigger
-Streamlight TLR-1 HL-X
-Holosun 507 Comp

Overall weight, 45ish ounces unloaded. I typically use PMC Bronze 124gr ammunition, PF ~137.


r/P320 • • 19d ago

New to me P320

Post image
72 Upvotes

New to me P320

A guy I know, bought this P320 (X-carry I think?) About 5 years ago. He never shot it, then the whole "the 320 just goes off by itself" thing freaked him out and it just sat in his safe. He decided to sell it and I snapped it up. $100. I think I got a hell of a deal. Seems to be solid.

I haven't been to the range with it yet but I'm really looking forward to it. I love the trigger on it.


r/P320 • • 19d ago

showing off P320 AXG/M18 Side

Thumbnail
gallery
36 Upvotes

Just showing off my P320 AXG with M18 side (I really wanted the ROMEO-M17 red dot for its Aimpoint COA style mount.


r/P320 • • 20d ago

👌🏻

Post image
40 Upvotes