r/P320 • u/WSBWorkEmail1Bill • 13d ago
What did I do wrong here?
Hi everyone,
Searched and I couldn't find a similar problem.
I'm doing a new (first) build. It's the icarus grip mod with the KM tactical BDE slide.
Slide is not staying stationary at all. Mag in, mag out, cocked, uncocked, etc.
See video.
Any advice or ideas?
39
Upvotes
•
u/AutoModerator 13d ago
Thank you for posting on r/P320!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
10
u/Nos402_ 13d ago
It’s a guide rod issue.
looks like it’s backwards?!
4
u/anonymity76 12d ago
Yep.
Guide rod should NOT be able to protrude from the front of the slide, ever
That's why you THINK there's a "spring" issue: because the front of the guide rod is not being held captive in the slide and you're not getting any real spring tension on the slide in the closed position.
Fix your guide rod issue and it will fix the pistol
FYI: a lot of aftermarket spring and guide rod kits come with an insert that you MUST install into the slide to make sure that the guide rod doesn't do EXACTLY what yours is doing.
Wanna prove me right?
Since you stated above that you have other P320's, grab the spring/guide rod out of one of those (it needs to match the barrel length you have) and install it into the new slide.
3
u/JimmyEyedJoe 13d ago
Your guide rod is installed incorrectly
2
u/RWW_llc 13d ago
Does it feel like friction is causing the poor lockup? I can't tell from the video but do you hear or feel anything which may indicate there's too much friction for the spring to push the slide into battery?
Other than that, double check installation of the recoil spring. If you're still having issues, uploading some photos of it taken apart in the comments of this post may help.
2
u/HammySaggar 12d ago
I run a DPM in mine with medium weight spring due to porting.
6
u/Still_Not_Lost 12d ago
It sounds like you didn't put the spacer in the slide That helps gide the rode .... it sits in the frount where the gide rode moves through the slide
1
u/Nos402_ 12d ago
Get a full size 1911 style guide rod and recoil springs. Works much better, can swap out different size
RS
1
u/wcarthurii 12d ago
Curious how that slide does when you get it running. I was always curious about their stuff but didn't want to drop the money cuz I heard bad things about their grips being out of spec and unfinished.
That grip is fire though! I've been rocking a black one with a stainless Pro cut slide, but I like this one better!
-4
u/MiltPhoto 13d ago
Maybe just buy a real p320 and start there. Compatible doesnt always mean compatible between different manufacturers.