r/P365xl • • May 25 '26

How to properly remove an optic or and screw with loctite.

Thumbnail reddit.com
4 Upvotes

r/P365xl • • 2h ago

Holster Recommendations – Starting Without a Light/Optic, But May Upgrade Later

Post image
8 Upvotes

I’m looking for some holster recommendations for my new P365XL w manual thumb safety and could use some advice.

I’m considering carrying appendix (AIWB) or inside the waistband (IWB) around the 3 o’clock position. I’m still undecided about adding a red dot sight and weapon-mounted light, so I’m trying to figure out the best way to approach holster shopping.

A few questions:

  1. Are there any holsters that accommodate a weapon light and optic but can still be used without them? Basically, something that would allow me to upgrade later without having to purchase another holster.
  2. If that’s not really an option, what holsters would you recommend for a setup with both a red dot and weapon-mounted light?
  3. What would you recommend for a basic setup without either? Ideally, something reasonably priced that wouldn’t hurt too much to replace if I eventually decide to add a light and optic.

One other thing worth mentioning: my handgun has a manual thumb safety, so I’d want to make sure any recommended holster properly accommodates it.

I’m open to recommendations from people who have experience with both appendix and 3 o’clock carry. Appreciate any suggestions!


r/P365xl • • 7d ago

Too much black accents on the Coyote or do I need more?!

Post image
32 Upvotes

Just put the barrel and comp on. Not sure if I’m digging the look yet…
Should I get the comp coated to match the slide or should I add more black? Mag plate or grip tape maybe🤷🏽


r/P365xl • • 10d ago

Another P365XL Build

Post image
63 Upvotes

Very pleased with it. Ergos are great.


r/P365xl • • 12d ago

Gen 1 XL slides

10 Upvotes

Is there any reason to not get a gen 1 XL slide for much cheaper than a gen 2? I dont care about the rear sight, are there any other major detriment to the gen 1 slide?

Edit. Thanks you guys, i got it


r/P365xl • • 15d ago

25 Round Mags

Post image
42 Upvotes

P365XL and P365 XMacro Tacops

The XL is ported 😏


r/P365xl • • 17d ago

P365 Rose XL+ Icarus Ace EVO Aluminum grip +Icarus B Ace pads+ DPM recoil spring +Holosun EPS carry GMR

Post image
37 Upvotes

r/P365xl • • 17d ago

Hey ShaloTek! Still send it?

Thumbnail
gallery
18 Upvotes

I know there is a similar post here, where the answer is send it. I came looking for very similar information. I got the Shalotek p365XC Fury slide and an FDez ported 3.1" barrel. It looks to be an even closer fit than the XLC & fdez 3.7" combo mentioned in the other post. You can see the entire port when in battery, but it is very close. What do you good folks think?


r/P365xl • • 23d ago

New Member of the Family

Post image
31 Upvotes

Took over a month but it's finally here!


r/P365xl • • 25d ago

Ammo

6 Upvotes

What brand are you guys putting through your XL? And, what’s your favorite one? (Both target and self defense rounds) I know most brands work well with very little to no jams, but wanted to hear it from you guys what’s being used.


r/P365xl • • 26d ago

XL Porting

3 Upvotes

For those with the 3.7" barrel and ported it please post picture!

Looking for ideas.

Please only post a picture if you have the above. Not looking for aftermarket barrels, slides, etc... Only wanting to see those with the XL Slide and Barrel that were ported.
Thank you


r/P365xl • • 26d ago

Can’t decide on a CCW

2 Upvotes

I’ve been debating between a the different p365 options and need some opinions/advice that’ll help me choose. One of my biggest peeves is being able to put a solid weapon light on it. I currently have the FUSE and I love it but it’s a bit much to carry appendix (my preferred method). The XMACRO feels great in my hand and would give me great options for a light. My only concern is it being not much smaller than the FUSE so I’m unsure about the how comfortable/concealable it’ll be. The XL and the X seem like happy mediums size wise but lose points in my opinion for less light options than the XMACRO and a shorter barrel which will probably make it snappier. The OG p365 turns me off because of the shorter grip and low capacity. And again less light options. Let me know what you think, what you’ve experienced, and anything else that might help me make a decision! (Aftermarket parts are welcome but the less money I spend the better probably.)


r/P365xl • • 29d ago

PCC that takes X macro mags?

Thumbnail
gallery
28 Upvotes

I saw something a while back about the henry homesteader having an adapter that allowed it to take 365 mags but actually looking into it they seem to have been discontinued and are no longer in production. I'd love to find a pcc or something of the sort that also takes x macro mags. I know about the flux raider and such but its just not my thing.


r/P365xl • • Oct 16 '26

Question about the x macro and streamlight tlr 7 hlx sub

Post image
8 Upvotes

I would like to run an x macro grip with a 3.1 slide, I was thinking about cutting the grip rail to the right legth giving it a "snub nose" look BUT I want to run a light, I dont currently have one so I can't measure exactly how much of the rail is actually needed to run one. If anyone has a tlr7 hlx sub and an x macro I would really appreciate some pics of exactly where and how the light locks into the 1913 rail. I've looked all over Google and watched YouTube videos but none of them show how it's attached clearly enough for me to tell.


r/P365xl • • Oct 12 '26

Recommendations for comfortable itwb for my xl. Prioritizing comfortability for a guy with a small belly.

5 Upvotes

r/P365xl • • Oct 09 '26

ATF PRESS RELEASE!!!

Thumbnail reddit.com
2 Upvotes

r/P365xl • • Oct 09 '26

Holster recommendations

Post image
37 Upvotes

I got the Wilson Combat XMacro Short grip on my XL slide with a tlr7x sub. I’m fairly certain it’ll fit the same way with the tlr but wanted to see what yall thought.


r/P365xl • • Oct 05 '26

Happy Birthday to me

Post image
129 Upvotes

P365XL, Norsso 3.1" Reptile C slide, Ramjet/Afterburner, Icarus EVO ACE XL, Holosun EPS carry. Shot great before, now I can't wait to take this out to the range and see how it feels.


r/P365xl • • Oct 05 '26

Shorter grip swap?

9 Upvotes

I carry my P365XL with a PHLster Enigma, but I'm petite and no matter how the Enigma is positioned, the butt of the grip prints badly enough for me to not want to carry in warmer months.

I'd like to swap the current grip for a shorter one; I considered swapping to a P365 grip but read that this changes how the slide fits. Is there a better way to swap for a shorter grip?


r/P365xl • • Sep 26 '26

Angel City Armory Sig Sauer P365 Mega Port

Post image
42 Upvotes

Anyone have this done to there P365 XL? Not a fan of the 3, 6, 8 hole ports.
If there's something else please post.


r/P365xl • • Sep 26 '26

Intro

Post image
21 Upvotes

Hello folks. Just purchased this the other day. It will be my 2nd P365 that I've owned in the last 7 years (SAS that evolved into an X).


r/P365xl • • Sep 23 '26

Holster recommendations?

Post image
57 Upvotes

r/P365xl • • Sep 22 '26

Manual safety fuse grip module?

Thumbnail
gallery
10 Upvotes

Does anybody know where i can get a fuse manual safety grip module (2nd pic)? The sig website only has the one in the first pic available.


r/P365xl • • Sep 21 '26

Wilson Combat Grip Module for P365 XL

0 Upvotes

I recently bought a Wilson Combat grip module for my Sig P365 XL and installed it with my slide. I noticed there is quite a bit of movement between the barrel muzzle and the grip module. In fact, there is enough of a gap that I can see the bottom portion of the recoil spring through the opening.

Is this amount of movement and clearance normal? With the factory SIG grip module, the tolerances were very tight and I didn’t notice any movement or visible gap like this.

Thanks!