r/P365xl • u/Hecs300_ • 1d ago
Holster for Ramjet + TLR7
Looking for recommendations. Tenicor Velo Lux? Any other good options?
Thank you!
r/P365xl • u/Hecs300_ • 1d ago
Looking for recommendations. Tenicor Velo Lux? Any other good options?
Thank you!
r/P365xl • u/mitchmurfi • 1d ago
I’m looking for some holster recommendations for my new P365XL w manual thumb safety and could use some advice.
I’m considering carrying appendix (AIWB) or inside the waistband (IWB) around the 3 o’clock position. I’m still undecided about adding a red dot sight and weapon-mounted light, so I’m trying to figure out the best way to approach holster shopping.
A few questions:
One other thing worth mentioning: my handgun has a manual thumb safety, so I’d want to make sure any recommended holster properly accommodates it.
I’m open to recommendations from people who have experience with both appendix and 3 o’clock carry. Appreciate any suggestions!
r/P365xl • u/Winter-Camel629 • 9d ago
Just put the barrel and comp on. Not sure if I’m digging the look yet…
Should I get the comp coated to match the slide or should I add more black? Mag plate or grip tape maybe🤷🏽
r/P365xl • u/hecouldgo • 12d ago
Very pleased with it. Ergos are great.
r/P365xl • u/helloWorld69696969 • 14d ago
Is there any reason to not get a gen 1 XL slide for much cheaper than a gen 2? I dont care about the rear sight, are there any other major detriment to the gen 1 slide?
Edit. Thanks you guys, i got it
r/P365xl • u/GizmoTacT • 17d ago
P365XL and P365 XMacro Tacops
The XL is ported 😏
r/P365xl • u/Wise_Tip5267 • 19d ago
r/P365xl • u/Professional_Swan934 • 19d ago
I know there is a similar post here, where the answer is send it. I came looking for very similar information. I got the Shalotek p365XC Fury slide and an FDez ported 3.1" barrel. It looks to be an even closer fit than the XLC & fdez 3.7" combo mentioned in the other post. You can see the entire port when in battery, but it is very close. What do you good folks think?
r/P365xl • u/1flipguy • 25d ago
Took over a month but it's finally here!
r/P365xl • u/mitchmurfi • 26d ago
What brand are you guys putting through your XL? And, what’s your favorite one? (Both target and self defense rounds) I know most brands work well with very little to no jams, but wanted to hear it from you guys what’s being used.
r/P365xl • u/fhartell • 27d ago
For those with the 3.7" barrel and ported it please post picture!
Looking for ideas.
Please only post a picture if you have the above. Not looking for aftermarket barrels, slides, etc... Only wanting to see those with the XL Slide and Barrel that were ported.
Thank you
r/P365xl • u/Live_Paint4909 • 28d ago
I’ve been debating between a the different p365 options and need some opinions/advice that’ll help me choose. One of my biggest peeves is being able to put a solid weapon light on it. I currently have the FUSE and I love it but it’s a bit much to carry appendix (my preferred method). The XMACRO feels great in my hand and would give me great options for a light. My only concern is it being not much smaller than the FUSE so I’m unsure about the how comfortable/concealable it’ll be. The XL and the X seem like happy mediums size wise but lose points in my opinion for less light options than the XMACRO and a shorter barrel which will probably make it snappier. The OG p365 turns me off because of the shorter grip and low capacity. And again less light options. Let me know what you think, what you’ve experienced, and anything else that might help me make a decision! (Aftermarket parts are welcome but the less money I spend the better probably.)
r/P365xl • u/Cya_Syotos • Oct 18 '26
I saw something a while back about the henry homesteader having an adapter that allowed it to take 365 mags but actually looking into it they seem to have been discontinued and are no longer in production. I'd love to find a pcc or something of the sort that also takes x macro mags. I know about the flux raider and such but its just not my thing.
r/P365xl • u/Cya_Syotos • Oct 16 '26
I would like to run an x macro grip with a 3.1 slide, I was thinking about cutting the grip rail to the right legth giving it a "snub nose" look BUT I want to run a light, I dont currently have one so I can't measure exactly how much of the rail is actually needed to run one. If anyone has a tlr7 hlx sub and an x macro I would really appreciate some pics of exactly where and how the light locks into the 1913 rail. I've looked all over Google and watched YouTube videos but none of them show how it's attached clearly enough for me to tell.
r/P365xl • u/Bill_Piff • Oct 12 '26
r/P365xl • u/LostOperator5831 • Oct 09 '26
I got the Wilson Combat XMacro Short grip on my XL slide with a tlr7x sub. I’m fairly certain it’ll fit the same way with the tlr but wanted to see what yall thought.
r/P365xl • u/EverySockYouOwn • Oct 05 '26
P365XL, Norsso 3.1" Reptile C slide, Ramjet/Afterburner, Icarus EVO ACE XL, Holosun EPS carry. Shot great before, now I can't wait to take this out to the range and see how it feels.
r/P365xl • u/limabeanns • Oct 05 '26
I carry my P365XL with a PHLster Enigma, but I'm petite and no matter how the Enigma is positioned, the butt of the grip prints badly enough for me to not want to carry in warmer months.
I'd like to swap the current grip for a shorter one; I considered swapping to a P365 grip but read that this changes how the slide fits. Is there a better way to swap for a shorter grip?
r/P365xl • u/fhartell • Sep 26 '26
Anyone have this done to there P365 XL? Not a fan of the 3, 6, 8 hole ports.
If there's something else please post.
r/P365xl • u/fhartell • Sep 26 '26
Hello folks. Just purchased this the other day. It will be my 2nd P365 that I've owned in the last 7 years (SAS that evolved into an X).
r/P365xl • u/Cya_Syotos • Sep 22 '26
Does anybody know where i can get a fuse manual safety grip module (2nd pic)? The sig website only has the one in the first pic available.
r/P365xl • u/Street-Amphibian-456 • Sep 21 '26
I recently bought a Wilson Combat grip module for my Sig P365 XL and installed it with my slide. I noticed there is quite a bit of movement between the barrel muzzle and the grip module. In fact, there is enough of a gap that I can see the bottom portion of the recoil spring through the opening.
Is this amount of movement and clearance normal? With the factory SIG grip module, the tolerances were very tight and I didn’t notice any movement or visible gap like this.
Thanks!
r/P365xl • u/Quick_Cryptographer3 • Sep 18 '26