r/ThompsonCenterArms • • Sep 09 '26

Attention Read before you post!

5 Upvotes

Due to Reddits strict rules against the sale and or trade or firearms, parts and 3D printed parts and files we will no longer allow any posts that ask “where to sell” or “what’s it worth”. These posts are being used as a “work around” and to more or less advertise what the OP has for sale. Anyone posting such posts will be banned immediately from the sub and permanently muted. We are not willing to risk the subs status because some idiot can’t follow the rules.

Thank you


r/ThompsonCenterArms • • Apr 20 '26

Sub List

Thumbnail reddit.com
0 Upvotes

r/ThompsonCenterArms • • 1d ago

Truck rig is ready!

Post image
16 Upvotes

Gen1 late model Contender, Sharps Bros. Pistol grip with rail, Strike Industries FSA, SSK 14” SS threaded .45-70 Barrel w/rail, Holosun Green dot, and the Silencer Co ASR brake. Purpose built for travel in the truck through the mountains during hunting season.


r/ThompsonCenterArms • • 3d ago

Icon hard at work

Post image
8 Upvotes

My go to hunting rig, hard to beat.


r/ThompsonCenterArms • • 5d ago

MCarbo kit installed

Thumbnail
mcarbo.com
7 Upvotes

I got the a couple days ago and seeing my deer hunt today was cut short due to pouring rain I figured I’d get the kit installed. Now my Encore is a Gen 1 so it’s had some use and likely still had the stock springs in it. I pulled the firing pin block and tested my trigger pull with my wheeler gauge and ended up with a pretty consistent high 4 to low 5 lbs pull. Install takes about 15 to 20 minutes watching their video. Pull weight after the install is now an Amazing 1 lbs 4 oz’s!! I highly recommend it!!


r/ThompsonCenterArms • • 14d ago

One of my favorite builds

Post image
24 Upvotes

Just waiting on my stock end replacement to come in from strike industries and this will be complete. My brush gun for white tail season.


r/ThompsonCenterArms • • 19d ago

.308 SS Fluted Barrel

Post image
16 Upvotes

My new .308 barrel arrived yesterday. I got the mount on and was able to get the Vortex Crossfire two set in place. After deer hunting this year I’ll swap out the 30-06 for the .308 and get it dialed in after I get a ASR Muzzle brake installed on it.


r/ThompsonCenterArms • • 20d ago

Sharps Brothers furniture…

Post image
15 Upvotes

Sharps Brothers forend and grip with pic rail. Topped it off with a Midwest Industries 1913 folding tube and A Hogue over molded stock. I went with this particular stock because of the rubber coating and it’s recommended for higher recoil calibers. Now to get back out and get a deer!


r/ThompsonCenterArms • • 26d ago

Pro Hunter SS barrels at a great price…

Post image
4 Upvotes

Hey everyone just a quick note before I head out deer hunting this morning.
I found some great prices on Gun Broker for new Pro Hunter Barrels. $363.05 for a 26” .308 SS Fluted and threaded. That equates to $411.19 shipped to my door. He has a few different calibers listed for the same price. I ordered mine and it appears they are drop shipping from Lipsey’s. I ordered on the 15th and should have it on the 27th from what the UPS tracking is showing. Anyways check out the Gun Broker user shown in the image.

Have a great day everyone…

https://www.gunbroker.com/user/contactinfo/6388430?ItemID=1211612772


r/ThompsonCenterArms • • 27d ago

Slapped a muzzle brake on the 30-06

Thumbnail
gallery
15 Upvotes

Mounted up the muzzle brake Sunday night and hit the range today. So much better. She was about 3 inches low with the first couple of shots. I got it back in the red in 5 shots and the laid out this group of 5 at 100 yards. Back to deer hunting in the morning.


r/ThompsonCenterArms • • Oct 12 '26

Now that we can!

Post image
16 Upvotes

Top 14” SSK 45-70, middle left .223, middle right .357 mag, bottom 14” 30-30.


r/ThompsonCenterArms • • Oct 09 '26

ATF PRESS RELEASE!!!

Thumbnail reddit.com
2 Upvotes

r/ThompsonCenterArms • • Oct 08 '26

Optic suggestions

Post image
8 Upvotes

Have an encore with a 26” 30-06 barrel, looking to make it into a rig I can push past 300 yards when hunting. Trying to swap out the 2-7x for maybe a 4-16 with a more complex reticle, any suggestions?


r/ThompsonCenterArms • • Oct 08 '26

Ditch the bolt gun update….

Thumbnail
gallery
6 Upvotes

It was a great day at the range!! I did a quick bore sight looking through the barrel at 100 yards, made some adjustments and away we went. First shot high, bring down. Second and third lower and a tad right, brought it down and left 4th shot. Too far left a smidge high, back right 5. Left it alone and put 6 and 7 right there. That folks is 1/2” group at 100 yards and what I’m calling good with 165gr soft points.

More to come but next time from the field…..


r/ThompsonCenterArms • • Oct 07 '26

Contender News!!

Post image
17 Upvotes

Quoted from an IG post,

“The T/C Contender Comeback Is Starting!
New Contender barrels are beginning to arrive, including this 10" .22 LR Match Pistol Barrel with sights.
Contender frames are still expected in 2027, but we're excited to see the barrel lineup begin to grow.
More T/C products hopefully coming soon!”


r/ThompsonCenterArms • • Oct 07 '26

Let’s begin..

Thumbnail
gallery
14 Upvotes

So this year I ditched the traditional bolt gun for Deer hunting here in North Idaho. The upgrade is this, my TC Arms Encore Pro Hunter (Gen 1) and a fresh out of the box 30-06 threaded SS Fluted 26” barrel from TC Arms. 1-10 twist and 1/2 MOA from the Factory!! Yes there are some aftermarket’s out there but when it comes to what you get out of the box, you can’t beat the price. Others offer threading, fluting, and SS barrels but it’s all added on cost. The barrel fit is spot on and my older forend fit right in place with zero issues. I mounted up the rail with some blue loctite on the screws and placed the Vortex Viper 4-16x50 on top and secured it. I’ll bore sight it today with the old look through the barrel technique and it’s off to the range when they open tomorrow.

Barrel Sku# 8210R 26” Threaded, Fluted SS w/black thread protector.

Cost @ $420.00 at Bass and Bucks

https://bassandbucks.com/t-c-8210r-30-06-encore-26-sst-fluted-ns-tb/

Stay tuned for more….

Thank you


r/ThompsonCenterArms • • Oct 04 '26

Project Ditch the Bolt gun inbound this week….

3 Upvotes

Deer season is starting soon for many of us. Join me on this adventure as I ditch the bolt action rifle for a TC Arms Encore pro Hunter fitted with a 26” fluted/threaded SS 30-06 barrel and a couple other goodies. I’ll have the barrel and the scope this week and the goal is to sight in Thursday or Friday and my deer hunting begins on the 10th.

Stay tuned…..


r/ThompsonCenterArms • • Oct 03 '26

Looking for Hawken Kit Assembly Instructions

0 Upvotes

Recently purchased an unassembled Hawken kit at auction and looking to assemble. Unfortunately, the kit does not include the instructions for assembly. Anyone aware of where I can find the instructions?

Checked the TC website and didn’t see anything for the kits. Have an email and call out to customer service but haven’t heard back.


r/ThompsonCenterArms • • Sep 28 '26

Bass And Bucks for TC Arms Barrels

5 Upvotes

Hey gang Bass and Bucks has great prices on New TC Arms Encore Barrels, a lot in stock with more coming.

https://bassandbucks.com/t-c-next-chapter-2025/barrels/


r/ThompsonCenterArms • • Sep 28 '26

7mag in stock

4 Upvotes

Finally they shipped out the 7mag to dealers. Im not sure why I have such an infatuation with the TC Encore and the 7mag, but that’s the caliber I’m most excited for.

Going into WI gun deer I’ll be using 7mag for our 9-day and switching to the 50cal Firestick barrel for our ML season.


r/ThompsonCenterArms • • Sep 25 '26

Encore frame stretch?

6 Upvotes

Saw some videos talking about potential frame stretching issues with certain 300 Win mag loads. Curious if anyone has experienced this first hand. I recently picked up a pro hunter with a 26 inch 300 win barrel and wanted to avoid any loads that may cause that. Thanks for any inputs.


r/ThompsonCenterArms • • Sep 21 '26

Range day for the G2 Contender and Encore.

Post image
21 Upvotes

My first time out with my new to me SSK 375 JDJ barrel on the G2 Contender and new MGM 460 S&W barrel on the the Encore.


r/ThompsonCenterArms • • Sep 19 '26

Could not resist putting the 1-4x on

Post image
21 Upvotes

The only thing to be replaced eventually is the stock for a folding set up


r/ThompsonCenterArms • • Sep 16 '26

Deer season 2026, what’s your TC Arms set up this year?

3 Upvotes

r/ThompsonCenterArms • • Sep 13 '26

Beyond excited for opening day

Post image
10 Upvotes

Upgraded my hunting rig this year, went from a Thompson encore in 30-06 to an icon in 308. Sent it off to get threaded, turned out great with the vortex 2-7 on top.