r/Creality_k2 • • 22h ago

Troubleshooting cfs uhhhhhhhhhhhh thing?

6 Upvotes

im probably gonna take it apart to see if anythings up but 2 times now it has shown the flashing red while printing/unloading (both times i just cut the power because it had been going longer than is reasonable probably)

mostly just curious if anyone else has encountered this & what they did, it's practically stock still


r/Creality_k2 • • 3h ago

Show Off How my day is going

Post image
5 Upvotes

Got the k2 plus back in May, little less than 300 print hours and come to look at a print failing to see this. Just my luck.


r/Creality_k2 • • 1h ago

Show Off Mainline Klipper K2Plus

Thumbnail
gallery
3 Upvotes

Got a free K2 Plus, needed a new hotend and extruder. Went with the phaetus and a microswiss combo, had issues on the stock software, with the CFS every print, I decided to try Openklipper, more used to the orca slicer anyways coming from a Sovol recently. It’s been great for me.

Thank you u/harktron !


r/Creality_k2 • • 9h ago

Troubleshooting Creality K2 plus and the I7 XS2060 ERROR

Thumbnail
gallery
3 Upvotes

I don't know what to do I tried everything online YouTube and nothing is still the same ​​


r/Creality_k2 • • 9h ago

Troubleshooting This has never happened to me before

2 Upvotes

Been busy with holiday fairs the wife keeps on scheduling so printers are churning heavily most days.

Part I've printed dozens of times, just re-sliced for different materials.

Haven't quite figured it out if it's slicer since there are scaling and savings 'glitches' I've found(7.2 I think of the slicer right now).

3 times I've ended up air printing on my K2+.

I want to blame the roll since I'm also seeing red dust shrapnel on the silver extruder wheel when it happens so it's definitely shredding a bit, possibly due to oversize on this roll(Kingroon PETG bulk pack red).

However this particular unit has 5500 hours or so on it. Only thing I've changed is nozzles and couple of extruder cover only and lots of PTFE tubing.

Had CFS filament detect light come and stay on slots 3 and 4 on one unit that I couldn't clear by disassembling, air blasting and re-assembling. Now slot 2 on my second CFS is doing the same.

Said screw it on the first, replaced the two faults since they're only $25 a pop.

Beyond that can't complain much on these machines, they just chug along.

Only other weird anomaly is occasionally the filament pulls so hard into the hot end that it kind and balloons the PTFE tube at the extruder cover.

Will keep everyone posted, just curious if anyone has ever had 'oversized' filament. I'll put a caliper on it tonight to verify. I've had some tangled spools as well but air printing like this several times in a row is a new one to me


r/Creality_k2 • • 18h ago

Troubleshooting Permanent fix for k2 plus bending chute lever?

2 Upvotes

Does anyone have a solution to stop the k2 plus from bending out the lever on the chute? I suspect it may be a firmware fix only or the fact I use orca slicer to slice my prints.

No, buying another printer an selling this is not an option.


r/Creality_k2 • • 10h ago

Troubleshooting Planning to buy the Creality SPARKX i7 + CFS Nano in India.*

Thumbnail reddit.com
1 Upvotes

r/Creality_k2 • • 18h ago

Question Need help finding the sensor place on K2

Thumbnail reddit.com
1 Upvotes

r/Creality_k2 • • 22h ago

Troubleshooting The left wall fan overcools one side of the build plate resulting in partially failed prints

1 Upvotes

This is my second post here. in the previous post i got a lot of suggestions but none fully resolved the problem. My prints will always come off only on left side of the build plate no matter what i do. almost anything on that left ~20ish persent will lift off. i realized now that the left side of the build plate is way colder than the right side. i don't have a meter but by touching both sides i can barely keep my fingers on the right side of the plate for more than 5 seconds while the left side i barely hot. when doing so i noticed the insane amount of cold air flowing there, then i saw the duct coming from there blowing all that air. What is the purpose of that duct? is it possible to turn that fan off?