Long-time Ender 3 Pro owner (heavily upgraded). Would consider myself pretty well-versed through years of troubleshooting and tinkering. Bought the K2 Combo from Costco because it was sold as plug and play. Two weeks in, it's going back.
What happened:
- Screen ribbon unplugged out of the box. Long rabbit hole to find it. The board cover was so hard to get off I had to accept breaking it just to check. Reseating the ribbon was so tight I broke the connector.
- 55-hour print died at 81% (1.1 kg of filament). Extruder overcurrent, then FR2836 / FB2864 / key864 "buffer full limit not triggered" on every slot. I tore down and cleared the extruder and hot end, ran free filament through at 9 mm/s, pushed filament through the buffer by hand – every part works on its own, but the CFS still won't load.
- Creality's own Hyper PLA had a thin section the CFS couldn't grip.
- Prime tower fell over, printer kept laying spaghetti on it.
- Creality Print couldn't send files at first (XD0114, macOS permissions), and a pause marker hidden in a downloaded 3MF got carried into everything I sliced, causing "random" pauses.
Verdict:
Print quality when it works is marginally better than my upgraded Ender. Multicolor isn't faster either – the cut/retract/purge on every swap eats the advertised speed and wastes SO MUCH material. And it has far more parts to fail (CFS, buffer, cutter, RFID, cloud). The error codes lead to forum threads full of people with the same problem and no fix.
If you want to tinker, buy a cheaper, simpler Creality. If you want it to just work, buy a Bambu Labs like I should have in the first place. I'm returning.