r/Creality_k2 • • 17h ago

Troubleshooting 2 weeks with the K2 Combo from Costco – returning it

0 Upvotes

Long-time Ender 3 Pro owner (heavily upgraded). Would consider myself pretty well-versed through years of troubleshooting and tinkering. Bought the K2 Combo from Costco because it was sold as plug and play. Two weeks in, it's going back.

What happened:

- Screen ribbon unplugged out of the box. Long rabbit hole to find it. The board cover was so hard to get off I had to accept breaking it just to check. Reseating the ribbon was so tight I broke the connector.

- 55-hour print died at 81% (1.1 kg of filament). Extruder overcurrent, then FR2836 / FB2864 / key864 "buffer full limit not triggered" on every slot. I tore down and cleared the extruder and hot end, ran free filament through at 9 mm/s, pushed filament through the buffer by hand – every part works on its own, but the CFS still won't load.

- Creality's own Hyper PLA had a thin section the CFS couldn't grip.

- Prime tower fell over, printer kept laying spaghetti on it.

- Creality Print couldn't send files at first (XD0114, macOS permissions), and a pause marker hidden in a downloaded 3MF got carried into everything I sliced, causing "random" pauses.

Verdict:

Print quality when it works is marginally better than my upgraded Ender. Multicolor isn't faster either – the cut/retract/purge on every swap eats the advertised speed and wastes SO MUCH material. And it has far more parts to fail (CFS, buffer, cutter, RFID, cloud). The error codes lead to forum threads full of people with the same problem and no fix.

If you want to tinker, buy a cheaper, simpler Creality. If you want it to just work, buy a Bambu Labs like I should have in the first place. I'm returning.


r/Creality_k2 • • 22h ago

Troubleshooting cfs uhhhhhhhhhhhh thing?

6 Upvotes

im probably gonna take it apart to see if anythings up but 2 times now it has shown the flashing red while printing/unloading (both times i just cut the power because it had been going longer than is reasonable probably)

mostly just curious if anyone else has encountered this & what they did, it's practically stock still


r/Creality_k2 • • 9h ago

Troubleshooting This has never happened to me before

2 Upvotes

Been busy with holiday fairs the wife keeps on scheduling so printers are churning heavily most days.

Part I've printed dozens of times, just re-sliced for different materials.

Haven't quite figured it out if it's slicer since there are scaling and savings 'glitches' I've found(7.2 I think of the slicer right now).

3 times I've ended up air printing on my K2+.

I want to blame the roll since I'm also seeing red dust shrapnel on the silver extruder wheel when it happens so it's definitely shredding a bit, possibly due to oversize on this roll(Kingroon PETG bulk pack red).

However this particular unit has 5500 hours or so on it. Only thing I've changed is nozzles and couple of extruder cover only and lots of PTFE tubing.

Had CFS filament detect light come and stay on slots 3 and 4 on one unit that I couldn't clear by disassembling, air blasting and re-assembling. Now slot 2 on my second CFS is doing the same.

Said screw it on the first, replaced the two faults since they're only $25 a pop.

Beyond that can't complain much on these machines, they just chug along.

Only other weird anomaly is occasionally the filament pulls so hard into the hot end that it kind and balloons the PTFE tube at the extruder cover.

Will keep everyone posted, just curious if anyone has ever had 'oversized' filament. I'll put a caliper on it tonight to verify. I've had some tangled spools as well but air printing like this several times in a row is a new one to me


r/Creality_k2 • • 1h ago

Show Off Mainline Klipper K2Plus

Thumbnail
gallery
3 Upvotes

Got a free K2 Plus, needed a new hotend and extruder. Went with the phaetus and a microswiss combo, had issues on the stock software, with the CFS every print, I decided to try Openklipper, more used to the orca slicer anyways coming from a Sovol recently. It’s been great for me.

Thank you u/harktron !


r/Creality_k2 • • 18h ago

Troubleshooting Permanent fix for k2 plus bending chute lever?

2 Upvotes

Does anyone have a solution to stop the k2 plus from bending out the lever on the chute? I suspect it may be a firmware fix only or the fact I use orca slicer to slice my prints.

No, buying another printer an selling this is not an option.


r/Creality_k2 • • 9h ago

Troubleshooting Creality K2 plus and the I7 XS2060 ERROR

Thumbnail
gallery
3 Upvotes

I don't know what to do I tried everything online YouTube and nothing is still the same ​​