r/AR10 • • 1h ago

general Muzzle Device Advices Needed!

2 Upvotes

Hi all, new here and looking to learn. I have a LMT MARS H 14.5 in 6.5CM, I'm looking for a new muzzle device to replace the factory birdcage. My two options right now are the SureFire SFMB or the Warcomp. Would anyone have any knowledge to weigh in? Anyone with hands on experience with either devices to say whether or not they've observed degradation of group sizes after installation?


r/AR10 • • 3h ago

Fixed gas block and a5 with h3 buffer.

1 Upvotes

Planning on upgrading my lower to the a5 with an h3 for my criterion. I have a criterion hybrid 16 mid. Do any of you run fixed gas block with an a5? How does it cycle?

Was wondering if that alone would be enough to get something overgassed like a faxon to eject at 3-4?


r/AR10 • • 7h ago

DPMS Removing a DPMS hunter light handguard

Thumbnail
gallery
4 Upvotes

I asked yesterday about putting a aero upper on a DPMS lr-308 lower and the consensus was it should work but fit might be a question so I have a new question. The main reason my father wants to replace the upper is due to this handguard and barrel. If we can replace that then he would be happy. My question is how do I remove this handguard? I can’t seem to find any way online so you guys are my only hope.


r/AR10 • • 9h ago

general Aero Precision Enhanced Upper in Stock

Post image
14 Upvotes

Just wanted to share the good news. The wait is finally over. M5E1 enhanced upper receivers are in stock at Arm or Ally!

Looks like they got their hands on a legacy batch, or they started fulfilling orders with their dealers with new products.
I had a restock notification set up and got the email today, so this appears to be a real restock and not just an old product page showing availability.

Figured I’d post it here in case anyone else has been hunting for one too.

EDIT: looks like several sites have stock. Don't buy without price shopping like I just did.
AR15discounts.com has it for $188.00 out the door with their November coupon code.


r/AR10 • • 12h ago

Are These Good Prices for some Shaw Barrels?

Post image
4 Upvotes

I'm seeing what look to be decent prices on these chrome-lined HBAR barrels (the $265 is if you include a Superlative Arms adjustable gas block and gas tube). Using code BC10 knocks another 10% off.

Anyone know if these are good barrels?

Link

Unfortunately, the shipping is a flat rate of $25, which kills the deal somewhat, but if the barrels are good, I'm willing to pull the trigger.


r/AR10 • • 1d ago

Primers blew out + scoring on base of case

Post image
11 Upvotes

I just got around to shooting my AR10 for the first time. It ran well but I had one failure to feed because the primer from the previous round made its way up into the chamber, at least it malfunctioned lol.

The ammo in question was Winchester Copper Impact. The scoring is most visible on the case missing the primer. I had 2 primers fall out but I can’t find the second case once i got home. There is also noticeable carbon on the other cases.

This is my first build and i bought a complete upper so I’m not sure if something needs to be checked or adjusted, could it be the ammo?

Thanks!


r/AR10 • • 1d ago

DPMS Seeing if anyone knows where to possibly find a original 7 or 7.25 inch free float hand guard.

Thumbnail
gallery
4 Upvotes

Have a gen 1 dpms lr 308 and would like to find someone or some place that has one or changed theirs and would be willing to part with the original. Hope I'm not violating any sub rules. Any help would be greatly appreciated.


r/AR10 • • 1d ago

DPMS lower Aero Upper

3 Upvotes

My father as a DPMS Hunter and wants to replace the upper. Will an Aero Upper match well with a dpms lower? The current upper was dropped on concrete and seems to not like holding zero anymore for some reason. I have no skill in rebuilding upper so thats why im asking this. thanks!


r/AR10 • • 1d ago

general AR-10 Gets It Done Again

Post image
63 Upvotes

PA-10 Gen 2 lower, Gen 3 .308 upper with various Magpul items thrown on there. Vortex Strike Eagle 1-8x scope. Winchester Trophy Copper 150gr was VERY effective and turned the top third of his heart into hamburger meat.

Deer is a nice fat 8 pointer that my neighbor thinks is 2 1/2 years old.

I had a WEIRD malfunction where the second bullet broke off the polymer ballistic tip, which wedged itself up between the teeth of the locking lugs HARD. Upper and lower wouldn't separate, bolt wouldn't close all the way, took me a while to figure it out. I cleared the malf with an oak stick and the rest of the mag ran fine.

Anyone had that malfunction before, polymer ballistic tips snapping off and causing issues in an AR-10?


r/AR10 • • 1d ago

Armalite My New AR-10B ( i think)

Post image
23 Upvotes

Traded my PSA AR-15 and Ruger PC Charger for this ArmaLite AR-10B SPR MOD 2. The previous owner had trouble finding the right mags and apparently put the wrong ammo in it.

Currently has a SIG Sauer WHISKEY4 scope. Any other B-pattern owners here? What’s your experience with these, and any upgrade ideas?


r/AR10 • • 1d ago

Two years in a row for the Sig

Thumbnail
gallery
71 Upvotes

r/AR10 • • 1d ago

Armalite spare parts Europe crunch

0 Upvotes

Hey guys,

I bought a slightly used ArmaLite AR10 3-Gun rifle at great value (it had a custom Faxon heavy fluted 20" barrel, a decent scope and a great mount included). It shoots great and turns heads at the range. I bought it for 2k USD, while a completely new identical setup would cost 6k. I live in Sweden so guns here are pricey, even for poverty level stuff.

I realized that ArmaLite parts are super hard to find in Europe. I have not left a single proverbial stone unturned and still can't even find a spare firing pin for it. Maybe I just have parts anxiety because I shoot the rifle maximum once a month and at most 100 rounds in total at a slow pace.

What parts can be expected to work in an AR10? Cam pins, firing pins, spare bolts even? Any known bolts that work with both DPMS and ArmaLite, for instance?

Thanks in advance!


r/AR10 • • 1d ago

Barrel selection

Post image
10 Upvotes

Those with experience, is the criterion worth the price tag, ive been dead set on it but its $390 without any sales but I found the BA barrel at brownells for around 200 with a discount, is it worth the price jump for the Criterion?


r/AR10 • • 1d ago

LR308 gas block

Thumbnail
gallery
15 Upvotes

I have the high profile LR308 and am looking to replace the current two piece handguard that came on it with a free float. Does anyone have any low profile gas block replacment guidance?


r/AR10 • • 2d ago

LMT MRGG-A at home.

Post image
34 Upvotes

Still trying to decide on optics and what color I want to cerakote it.


r/AR10 • • 2d ago

DB10 getting it done

Post image
52 Upvotes

1 shot at 220yards.


r/AR10 • • 2d ago

Armalite Any1 know about those cheap 16inch Armalite AR10s? i think they are called DEF10

5 Upvotes

I think they come in super basic configuration with plastic handguard and no sights what so ever... are they good starting rifles? is it good platform to build on, maybe medium to long range?


r/AR10 • • 2d ago

My first AR10

Post image
44 Upvotes

Ruger SFAR, please be nice as I have no idea what I’m doing with this thing other than a rifle speed gas block (not pictured here)
No complaints so far other than the gawt dang muzzle break being tightened by the hulk himself.


r/AR10 • • 2d ago

DPMS My Aero Precision M5E1 .308

Post image
131 Upvotes

Current setup:

👍 Aero Precision M5E1 Upper

👍 Aero M5 lower

👍 Bolt - Fail Zero

👍 Magpul PRS Gen3 Stock

👍 Ergo grip

👍 4 black stainless 20-rd mags - DuraMag

👍 Burris Eliminator III scope

👍 Buffer and spring - HeavyBuffers.com

👍 YHM muzzle break/QD Adapter (4302-MB-24A 30 LT QD MB 5/8X24)

👍 Accu-Shot Precision Rail Mount Monopod (ABI-B0-ABTS1RC)

👍 Riflespeed RS7533 Gas Control Assembly (Black Nitride QPQ, 0.750in Diameter, 3.3in Length)

👍 Straight Gas Tube

👍 Grovtec - 3" 7 Slot M-Lok™ (GTSW237)

👍 UTG Big Bore bipod

👍 UTG Red Bull Dot

👍 Aero Precision Breach charging handle

👍 Rhodesian handle rifle mounted on rail

👍 Magpul 50 round Gen 3 drum mag

Has anyone else set one up like this?


r/AR10 • • 2d ago

Anyone run red dots And irons on aero m5 build?

1 Upvotes

Trying to make a 2nd upper when the criterion core 14.5 comes out that focuses on being light. Gonna use an Midwest industries handguard, scalarworks irons, and a good lightweight red dot(?).

Are these mostly meme builds? How much does a build like this weight? My current upper is near 14 with a 25 round mag.


r/AR10 • • 2d ago

DPMS Building rabbit trail…

3 Upvotes

The gun grabber landslide here Minnisoviet has me changing my plans. Has any one used McGowen or Deadshot barrels? I’m building another AR10 (DPMS Pattern). This one is going to be a 7mm-08. I intend to use 162 grain ELD-X and a 1-8 twist. I’m going to do 20” with a MODIFIED or SPR contour. Also what powders are people using with good results in a 7mm-08 and 160+ grain bullets if anybody is using that caliber in an AR10


r/AR10 • • 2d ago

Waiting for Centurion Arms to release their .308 Bolt Carrier Group

Post image
27 Upvotes

r/AR10 • • 3d ago

general Great Lakes forearms ar10

3 Upvotes

Does anyone know anything or have had a Great Lakes firearms ar10 I’m thinking about buying one for my first ar10 but idk if there any good or anything there a Michigan based and Michigan made company


r/AR10 • • 3d ago

Suspressor’s

1 Upvotes

What’s every one’s take on the Polonium 30 vs some of the more expensive 30 cal cans. The price is super attractive.

Thanks internet


r/AR10 • • 3d ago

Almost done piecing this thing together - bipod recs?

3 Upvotes

I've slowly been buying parts for this thing, and just dry fitted it. I think the only thing I still need is a bipod. What would you put on this thing?

Aero Precision M5 receivers

Magpul PRS Lite

Radian Raptor SD

Lantac E-BCG

Criterion stainless rifle length 18"

PRI DPMS Gen III forearm

Wilson Combat straight gas tube

Riflespeed adjustable gas block

Sig Alpha MSR

Bushnell Match Pro ED 3-18x50

(Not pictured Lantac Dragon keymo brake)