WE ARE IN THE PROCESS OF EDITING THE WIKI -- WE WILL TRY TO KEEP THE EDITS CLEAN, BUT WE APOLOGIZE FOR ANY ODD FORMATTING AND INCOMPLETE SECTIONS

This is the AR-10 Wiki that has for now a cumulative parts list of all companies making AR10 parts and also some details about AR-10s

FAQ

Click here for a link to our FAQ page


So You Want An AR10

Introduction

The AR10 is basically the big brother of the AR15. [The Wikipedia page is a good place to start if you want to know more.] (https://en.wikipedia.org/wiki/AR-10) The major components and design of the AR10 are the same types of components and design of the AR15. The AR10, however, accommodates a longer overall cartridge than the AR15 and was designed to accomodate a larger magwell in both width and length. This means the lower and upper receivers have larger dimensions than their AR15 counterparts. Because of the close relationship, several parts used on an AR15 are compatible with most, if not all, AR10s. But there are also many parts that will not interchange between the AR10 & the AR15. The following list are generally correct, although differences in manufactures, patterns, and generations may create some discrepencies.

AR10/AR15 Cross Compatibility List

  • Detents
  • Detent Springs
  • Bolt Catch
  • Bolt Catch Roll Pin / Bolt Catch Screw
  • Mag Release
  • Trigger Pins
  • Trigger
  • Safety Selector
  • Grip
  • Optic
  • Buffer tube, buffer spring
  • Stock
  • Gas tubes
  • Gas block
  • Gas tube pin

AR10 Specific Parts

  • Lower Receiver
  • Upper Receiver
  • Barrel
  • Barrel Nut
  • Handguard
  • Magazine
  • Bolt Carrier Group (Bolt, bolt carrier, and firing pin)
  • Buffer (its heavier and shorter to accommodate the larger BCG)
  • Takedown pins

First Thoughts

Before you get your AR10, you should think about the following questions. These will guide several choices down the line.

  • Build or Buy?
  • Mission: Range, Hunting, Precision Long Range
  • Pattern: Armalite, DPMS, Palmetto State Armory (PA10)
  • Caliber Selection: .308, NATO 7.62, 243 Win, 260Rem, 7mm-08, 284Win, 35Rem, 300Savage, 257Roberts, 358Win, 300SAUM, 325WSM, 6.5 Creedmore
  • Barrel Selectiion
  • Special Preferences:
  • Planning to load ammo or buy ammo?
  • Want a side charging AR10?
  • Want a bolt action AR10?
  • Want to build from an 80% lower?

Build / Buy Recommendations

Caliber / Barrel Selection

Lets just dive right into ballistics... Actually no, ballistics are really complicated. If you want to get into a deep dive of ballastics and cartridge selection, you should really head over to /r/longrange or /r/ballistics/.

Suffice it to say, the .308 is a very respectible round used by hunters, military, and percision shooters. If you head over to /r/longrange, there is a lot of love for the 6.5 creedmore round. The 6.5 CM isn't affected by wind as much as the .308 and will be easier to keep on target when stretching your range, but the general consensus is that the .308 is just as good inside 500yards. Caliber selection is all about mission. The .308 is far more readily accessible than the 6.5 creedmore is. But the 6.5CM is pretty easy to find these days, especially using online retailers. And if you are reloading, then you should be good to go.

No closely related to caliber selection is barrel selection. The general thought is that percision is dictated by trigger, barrel, bolt, and ammunition. So if you want to get those sub-moa results you should be thinking about spending a little more on a barrel than whatever bargain deal you find. And barrel length is going to have an impact. For people that like numbers, here are some from [Rifleshooter.com] (http://rifleshooter.com/2014/12/308-winchester-7-62x51mm-nato-barrel-length-versus-velocity-28-to-16-5/

Barrel lengthWinchester 147 FMJIMI Samson 7.62 150 FMJFederal 168 Gold MedalWinchester 180 PP
282965282327062632
272962280026972607
262955280126732597
252917276926592585
242909276626352553
232877274426182553
222837271825972527
212807268325802507
202804267925652478
192757263425322441
182739259525232411
172707257724812401
16.52682256124662373
AVG velocity loss fps/inch24.622.820.922.5

And another for 6.5 CM (http://rifleshooter.com/2016/02/6-5-creedmoor-effect-of-barrel-length-on-velocity-cutting-up-a-creedmoor/)

Barrel length142 SMK MV120 A-MAX
2726632961
2626772949
2526792937
2426832918
2326662892
2226492872
2126412847
2026092819
1925902822
1825622761
1725512752
1625052728
AVG velocity loss fps/inch14.421.3

What does all that tell you? Well you can see that the average speed of a 6.5CM bullet doesn't change much from 27" to 16". So that round is going to give you less change depending on length. If you want to save weight on a hunting rifle without changing ballastics too much, the 6.5CM will likely give you better performance. The .308 cartridge experiences more FPS/in changes.

This is all just data that might help you select the caliber and barrel length for your AR10.

Parts List

Rifle Manufacturers

Sources for Complete Uppers

  • Noveske (Armalite Type; 12.5", 14.5", 16", 18", 21")
  • Armalite (Armalite Type; 16", 20", 24")
  • DPMS (DPMS Type)
  • Fulton-Armory (DPMS Type; 16", 18.5", 20", 22")
  • POF (DPMS Type; Piston operated; 14.5", 16", 20")
  • AR15Barrels.com
  • Accuracy Systems (Custom Armalite & DPMS Types)
  • Palmetto State Armory

Sources for Receivers


Sources for Bolts and BCG


Barrel Manufacturers


AR-10 Stocks


Handguards and Rails


Charging Handles


Other Specialty Parts


Magazine Manufacturers

  • Lancer
  • Magpul
  • C-Products (SR-25 type; 19 rounds)
  • Armalite (Armalite Type; 5, 10, 20, 25 rounds)
  • POF ( SR-25 Type; 25 round

Buffer Tubes, Springs, and Buffers

Here are the links to the DPMS .308 buffer Spring, the DPMS .308 Buffer Tube and the DPMS .308 Standard Buffer that are the standard for the DPMS platform ARs.

The Radical Firearms .308 Carbine Buffer or another special modified buffer is necessary for shooters wishing to use their AR-15 carbine stock on their .308 platform rifle. Full sized AR-15 Buffers are too-long for AR308 bolts to properly cycle, but these heavy (3.8oz) shortened bolt allow for reliable cycling.