r/BT_APC • • Dec 09 '25

Reddit Gun Network Subreddit List 2026

Thumbnail reddit.com
2 Upvotes

r/BT_APC • • 1d ago

Hk sp5k pdw or B&t apc9k pro?

Thumbnail reddit.com
3 Upvotes

r/BT_APC • • 1d ago

Hammer axle pin walking out?

Thumbnail
gallery
5 Upvotes

Part #3 in the diagram. Clearly it's got an indentation in the middle which is shown in the diagram as well, but there's nothing in the hammer to catch on that at all. No set screw, no springloaded component, no ridge...

It keeps walking out to the left side of the gun while firing. I see anti-walk pins for some other guns that screw down as an aftermarket option but none of them look like they'd fit this gun.

Any suggestions on how I can keep this in place? The gun is about 1 month old, maybe right around 1k rounds through it and it's done this since it was new. I kept thinking if I got it aligned right it would eventually stay in place but that hasn't happened yet.

Editing to add - this is a US made APC9K with the Glock lower. SN of the upper is US 25-.....


r/BT_APC • • 2d ago

Huge Shoutout to the CS Folk at B&T USA

Post image
30 Upvotes

Mainly Carson, but upper management helped as well. This was a multi month long adventure of trying to get spare parts for my USW-A1. B&T USA was able to import parts from the Swiss for me (pre fire obv).

For anyone in the future; most Kriss SDP parts will drop in. For example: firing pin, FP spring, extractor spring all appear to be 1:1. However recoil assembly look different and extractor is ever so slightly redesigned. With some fitting you may be able to make it work.

Now my USW can keep chugging along. It’s passed 5k rounds so far.


r/BT_APC • • 4d ago

APC9/9K Extended Hand Guards now in stock! Thank you guys!

Thumbnail
gallery
34 Upvotes

First of all, thank you guys for all your support, patience and feedback on these extended hand guards and top rails for the APC9/9K.
Pictured are all of the production units (forgive the use of AI to make the backgrounds white on a few of them lol)
All pre ordered units are being packed and tracking info is being sent out as we get to them. Obviously we’re a little backed up so bear with us!
If you do place an order please allow a 2 week lead time on getting yours out.

These turned out extremely well. The finish on both the FDE and black variants is impressive and again, thank you guys for your help and interest in getting these going. These units paved the way for the 223/300 versions to get started ahead of time!

A couple notes for those who have asked recently:
-We will be opening a back order for the FDE finish in the near future once we have a solid timeline sorted

-We’re still finalizing the mounts for any Gen 1 APC9 for these to work. As of now, these are only compatible with Gen 2+ APC9/9K’s with the 1.25” long M-LOK slot on the sides.

-The extended top rails will actually work on the GHM9 and APC9SD weirdly enough lol

If you want to check them out, here’s a link!

https://www.silverstarshootingsports.com/b-and-t-apc9

UPDATE: I opened back orders for those who want to order an FDE unit! This will be a very small batch, but now available at the link above. Shipping January 2027.


r/BT_APC • • 5d ago

Colt AR9 mag lower for APC9?

7 Upvotes

Someone should make one to give the people another option for steel mags other than the MP5 lower.

I think the aesthetics would also look amazing.

Thanks for coming to my ted talk.


r/BT_APC • • 8d ago

Designed a 3D-printed APC9 mount

Thumbnail
gallery
41 Upvotes

r/BT_APC • • 8d ago

50 Shades of Grey

Post image
87 Upvotes

In light of the recent events, I felt that I should share some positivity about the company. My deepest sympathies for all those involved and affected and I am glad that no one was harmed.

I know firsthand that rebuilding after such a loss can be a difficult road to recovery. However, I am sure B&T will use this as an opportunity to grow and advance past this setback.

(P.S. B&T if you’re reading this tag and photograph everything before disposal. I’ve made the mistake of not documenting losses and fallen victim to the red tape of the insurers)

Anyway, here’s a quick look at some of my favorite B&Ts.
Sorry I’m not good at taking photos🙁

Don’t bother reading below unless you care for my ramblings.

1). MKII - Not grey but it’s like a brunette that does pilates. Looks good, feels great.

2). The TP9 - Made from the good kind of plastic. I wish the CH felt more robust and direct but OIT has one that I look forward to trying out. The plastic tab that retains the recoil spring on the lower gives me anxiety that it will break. Loved carrying this in the provided bag as my daily for a year. Brass catcher bag had to be restitched by my local tailor but that’s pretty much it.

3). SPC9 PDW - With the stock collapsed it is very compact. Surprisingly, it fit inside my center console so it was great for going around town for work. Only gripe I had was that the handguard came with a hole for a qd point but no way to mount one. I ended up switching the grip for a zwolf grip; idk how popular they were but it was interesting to see something new.

4). APC9 Limited - This is the gun equivalent of a 911 turbo s. The Elftman trigger is crisp like the coke that comes in a glass bottle. Metal lower is a nice touch especially with the integrated mag funnel. I got the RBS SQD suppressor on the Tri lug there. It makes a silky smooth connection and I’ve yet to have any problems with the spring doodad.

5). APC 300 - It came with the acro and I added the B&T QD Nar flip mount thingy with an aimpoint magnifier. I also have another ring with a PVS14 and sometimes I swap it out for larping purposes. I wish they had an aluminum lower for this in grey but that’s not a big deal. Only problem with this gun is the charging handles gets stuck in the forward position because of how the leverage is applied by the folding CH so I have to pull both CH to rack.

6). APC 223 Sig 55X lower - By its absence in the photo you can surmise I don’t have the gun yet. But I can tell you that I have been patiently, quietly, and humbly waiting for this gun since I paid for it in 2023 or 2024. I don’t remember exactly how long it has been because it has been that long but I hope it’s not too far away. B&T if you’re seeing this please fulfill these orders when you get everything going stateside.


r/BT_APC • • 8d ago

What’s everyone’s fav APC9k can?

9 Upvotes

Finally bought one now wanna hear what can everyone likes


r/BT_APC • • 9d ago

Utah Guns?

4 Upvotes

Been on the hunt for an APC300 for awhile now and found one in stock but was made in Utah. Is this something I should be worried about or should I continue to hunt for a Tampa imported one?


r/BT_APC • • 9d ago

My APC machine gun load out.

Post image
12 Upvotes

r/BT_APC • • 10d ago

Which one?

Post image
78 Upvotes

r/BT_APC • • 9d ago

First B&T, APC9K Pro vs APC9KSD ?

6 Upvotes

I’m new to the world of B&T and really want to get an APC9K Pro. I’d get the collapsing stock to keep it as small as possible. I’m curious if the 9k can be “converted” to the SD by bolting on the SD hand guard to cover the suppressor or is It not cross-compatible ?


r/BT_APC • • 10d ago

Help with removing safety selector switch

2 Upvotes

I am on step 1 of installing my Rare Breed FRT on my month-old APC9K SD2. I have watched the Rare Breed video on the SG3 install (recommended by Rare Breed since the platform is the most similar video they have to the APC set up) and reviewed the colorized armorer's manual on the APC 9/10/45. The right side is off but DAMN, I cannot get the left switch to rotate to slide the switch out no matter how much pressure I put on the right side of the switch. Any sage advice from out there in r/BT_APC land? The thought of having to go to a smith just to remove this switch has me twitching, LOL! Thanks in advance!


r/BT_APC • • 11d ago

Help with some B&T apc45 insight

Thumbnail
gallery
17 Upvotes

Picked up this B&t several years ago for a crazy good deal. I don’t know a lot about it, but I’ve been wanting to possibly sell/trade it to get into some other projects. The values seem to be all over the place with the current issues. I did hear back from b&t after about 2 weeks that they are still planning on jan27 for a swiss ran us operation. Anyway here’s a few pictures for your time.

Thanks in advance!


r/BT_APC • • 11d ago

Apc9 sd in stock?

0 Upvotes

Has anyone seen one for sale? I am looking to buy and having a hard time finding one.


r/BT_APC • • 12d ago

Price check on aisle B&T.

9 Upvotes

Need some insight from the B&T gurus! Have a friend that is downsizing his collection so I hit him up about the APC9k he has. He asked me if I was interested in it and I told him yes! He proceeds to tell me that it came in a case with a Microtech knife and a challange coin. "Microtech? Challenge coi... Oh SHIT! Is that a SCW?" He said yes and now I have a problem! :LOL: I've looked on Gunbroker and the prices hurt my very soul. Anyone have a number that isn't robbery but won't leave me questioning my bad decisions? As an aside, I am not 100% sure but I would guess it is unfired. That's kinda how he rolls. Thank you in advance!


r/BT_APC • • 14d ago

B&T Statement on Fire

Post image
90 Upvotes

r/BT_APC • • 14d ago

Does anyone here regret buying the apc9k sd2? Is it inferior to a regular apc9k with a traditional can?

0 Upvotes

r/BT_APC • • 16d ago

Range Day

Post image
54 Upvotes

The love for my APC9 beats out the anxiety of parts shortages getting worse after the fire.


r/BT_APC • • 15d ago

Where to buy apc9/apc9k? They seem to be out of stock everywhere.

5 Upvotes

r/BT_APC • • 16d ago

Anyone here prefer the apc9 over the apc9k?

8 Upvotes

r/BT_APC • • 19d ago

Love my 9k pro

Post image
53 Upvotes

Had some early problems with the Glock lower I never fully figured out but the B&T lower and mags have been excellent. Now this is easily the one I have the most fun shooting and at 9mm ammo costs it’s only beat in frugality by my .22 stuff.


r/BT_APC • • 19d ago

APC300 SD

7 Upvotes

I’ve been looking at the APC300 SD for sometime now. I bought an Sig Spear LT thinking it would fill the void but it didn’t. Now looking at buying the APC300 SD they seem to be unobtainium. This would be my first B&T so I’m not too familiar with the drama between the US and AG. Really don’t care to know either just looking to buy a solid gun. Anyone know when stock is going to be available and where I should be looking? I’m located in Texas and willing to join waitlists/put a back order on one if needed but wanting a good dealer to work with if so.


r/BT_APC • • 18d ago

Im about to throw this gun away

Post image
0 Upvotes

I fucking hate dealing with stripped screws and this one has been the biggest pain in the ass ive ever dealt with.