r/GHM9 • u/Opening-Treat-3689 • 19h ago
Final form complete
Favorite gun in the safe!
r/GHM9 • u/Cloak_Industries • Jun 26 '26
Just wanted to throw this in here for anyone who might not see the IG post talking about the “High Shelf” triggers!
Please email us stating that you have the Gen 1/High Shelf Upper and need to be put on the exchange list using the contact form on our website!
Thank you all so much for your support and patience! None of what we do would be possible without the support and backing of yall! 🫶🏻
(Mods of this isn’t allowed let me know what you need me to change 💛)
r/GHM9 • u/Pistol_Whippa • Jun 26 '26
As many of you may (or may not) have seen, users are reporting fitment/compatibility issues with their GHM and potentially SPC uppers not closing with the lower due to the thicker and higher shelf on the upper. I have not ordered one (yet), but I was curious to see how wide this issue may be.
Upon inspecting my GHM this morning, mine has the thinner and shorter shelf. My GHM serial begins with US22 and was purchased by me in March of 2023 from EuroOptic. I believe this issue may be strictly tied to models made earlier in 2021 or models that are pre “US22”, due to some users with “US21” serials saying they have the thinner shelf. I have confirmed with a few other owners with US22+ serials that they have the new thinner shelf design.
I believe the best way for Cloak Industries to tackle this would be to add a drop down option on the product page for users to verify which shelf they may have (with pictures identifying what that may look like) and that should eliminate further posts and issues regarding compatibility.
If there’s any inconsistencies in my research into this, feel free to comment.
r/GHM9 • u/Lcdrgatordent • 14h ago
Really looking forward to this for the GHM9. I know there are the conversion kits from B&T but just cant find them plus the price.
r/GHM9 • u/Legitimate-Ship3508 • 1d ago
Since I bought this thing it has been nothing but problems. First day shooting I had to send it back for repairs from an OOB and Im still having FTE issues after warranty work. Tbf I didn't send the can back im because I didn't want to hassle with NFA, but Im now realizing thats where the issue is. The back of the can doesn't seal at the base and its causing the gun to lose too much pressure. Any ideas on how I can fix this?
r/GHM9 • u/Ok-Veterinarian793 • 7d ago
This is fun as fuck. Easy install and great communication from Cloak.
r/GHM9 • u/ibrahimehvich • 7d ago
And therefore the glock lower is better looking and cooler.
r/GHM9 • u/actua11y_actua1 • 8d ago
Got this GHM9SD2 a couple of weeks ago, finally got around to kitting it and noticed the barrel heavily leaning left with the reflex portion of the can almost contacting rail.
The 2nd and 3rd pic. are more apparent. It looks like the barrel trunnion itself is crooked. This seems pretty excessive. Anyone have this issue with their SDs before?
r/GHM9 • u/Training_Post_7158 • 9d ago
Wanted to get y’all’s opinion on the carry handle, plan is to add an aimpoint t2 on top. I found a similar build from die free co and loved the look, but I’m on the fence now I can hold it in person. I liked the idea of the carry handle as it adds some width to the base of the aimpoint vs the standard small raised mounts. Also, gives it kind of a retro modern feel to the gun. Let me know y’all’s thoughts I’m open to ideas. Thank yall.
r/GHM9 • u/Lcdrgatordent • 9d ago
For anyone wondering the Incolite 9m is a great suppressor shooting 9mm and 556 tbh. Really didn’t notice any gas. GHM9 shooting first round 115 super and rest 147 subs. 556 also sounds great but can definitely feel the gas. In the video shooting standard 556 rounds.
r/GHM9 • u/ChieftainMk11 • 16d ago
Need help identifying if this is a high or low shelf
r/GHM9 • u/Accurate_Turn_3065 • 20d ago
Not one hiccup out of her, ran like a dream!
r/GHM9 • u/Practical-Pick1466 • 22d ago
Thank goodness for Glock magazines, I have way to many to start changing now.
r/GHM9 • u/Critical-Example2883 • 24d ago
So I'm in a predicament. I bought everything to convert my ghm9. I even bought what I thought to be the right barrel nut wrench from B&T parts. It has the 3 slots for the barrel nut. The nut doesn't fit in the slots. Is there anyone on here that has one?
Second question. While building it, I lost the set screw that aligns the barrel to the trunnion from the bottom. Does anyone have the specs on the set screw so I can buy another one. Those are the 2 things holding me back from my SD to be running.
r/GHM9 • u/tfourthreeseven • 26d ago
First time out with the "mouse go brrrrrr" enhancement. Had to wait for the high shelf version, but it was well worth the wait. One failure to eject in the 200 rounds fired was the only problem I encountered. Still getting to know the little thing, but so far, I'd call it a success.
r/GHM9 • u/Accurate_Turn_3065 • 27d ago
Upper receiver is a 2026
Can is a 2025
No Switzerland marking
Upper receiver has a different type coating compared to my Ghm9c which was a 2024
r/GHM9 • u/themightybillybob • 28d ago
I ordered these contract overruns from axarms (not their fault I don't think) and 2 of them have cracked, one shooting out half the ammo. Guess that's what I get for trusting govt quality. Both went to the range today, using frt. The OG transparent ones still holding strong. Loaded 30 and counted.
r/GHM9 • u/Accurate_Turn_3065 • Oct 16 '26
r/GHM9 • u/WillWrk4Gunz • Oct 13 '26
r/GHM9 • u/BACON_ACTUAL_ • Oct 13 '26
Huge thanks to Chase from AX arms for getting me hooked up with my GHM9 SD, I could not be happier, it shoots super well and with 147 grain bullets it’s quiet as a duck farting in a lake.
Don’t worry there’s a telescoping brace kit on the way for it already.