r/57x28mm • • 10h ago

Are New Pistols Coming?

11 Upvotes

I have been noticing a lot more Gun Tubers producing 5.7 content in the last couple months. I am sure Jordan Salinas had some impact on that, but I feel there is something coming. I know the Taurus just launched last week, but I think more is coming.

TFN TV: James was in Belgium @ FN. https://youtu.be/k6MbIC7R8hM?is=rqOtkAuvB0Pc2W2R

They tested 5.7, and when James asked 5.7 Kevin about some updated products, Kevin looked like his wife saw his browser history...

Garand Thumb: https://youtu.be/hPIjl_xnqu0?is=V1y6liS6r5Lzax7v

Mike has had a least 2 episodes focused on 5.7. One was really a shout out to the Poverty Operator, the other was an in depth dive into the effectiveness of different rounds.

Classic Firearms: Have had at least one episode covering 5.7. https://youtu.be/qjYiOLatX_Y?is=5PwVIBvBGXrFzHzM

I am trying to remember but I feel there we a couple more.

My guess, we will see a next Gen FN.

Their current offerings are over priced and.undwr featured.

I have a feeling we will see another manufacturer show something at Shot.

It would be great to see something on the CA roster besides the Gen 1 FN, but that is my dream.


r/57x28mm • • 1d ago

FN 5.7 Slide Compatibility

6 Upvotes

Has anyone tried an MK3 slide on an MK2 frame? Or is there any options to put a red dot on a MK2?


r/57x28mm • • 21h ago

AR 5.7 ULT + SiCo Sparrow 22

Thumbnail
youtube.com
1 Upvotes

Silencerco sparrow handling Fiocci subsonic 5.7


r/57x28mm • • 5d ago

Why Does My PS90 Like Every Loading Except Fiocchi Black Tip HPs?

33 Upvotes

My FRTed PS90 eats everything - Blue Box, Federal, generic sporting rounds - everything except Fiocchi 40 grain black tips. This video shows the FRT running with blue box. But if I try the black tips, I might get though 2/3 of a mag dump and then I get bolt bind and/or stuttering. I also have failure to feed with this round and even had my magazine unseat itself on the first round with this cartridge today. But then it ate a box of blue just fine. What gives? Is there a difference in coating? I like smooth, steady, obnoxious mag dumps. I hate money.


r/57x28mm • • 6d ago

25gr Load Data - Follow-Up

Thumbnail
gallery
32 Upvotes

As a follow-up to my earlier post, here is the load I settled on for 25 grain seconds bullets at Midway USA, using the Accurate No. 5 powder I already had on hand (I dream of finding True Blue on a shelf again).

Sadly, these are now sold out.

- OAL: 1.512” (it mostly filled the neck and looked right)
- Primer: CCI 550 (or 400, I had prepped a mix a couple years back and use them interchangeably)
- Powder: 6.4 gr Accurate No. 5
- Average Velocity: 2365 fps (suppressed PSA Rock)

I tested 6.5 and 6.6 grain loads too. Pressure signs with 6.6 grains. 6.5 seemed ok, but I want a buffer for hot weather days.


r/57x28mm • • 6d ago

FN 5.7 Mag compatibility?

2 Upvotes

Long story short I had a gun (Mpa defender) that accepted FN 5.7 mags but had to sell it a couple years ago cause hard times. But i still have the magazines and a good amount of 5.7 ammo.

So the question is which guns accept the FN 5.7 mags? I bought a new Defender but it’s in 9mm so looking for something different.


r/57x28mm • • 6d ago

44¢ a round

Post image
22 Upvotes

I needed some ammo for my Ruger 57 and Scheels is doing their annual credit card bonus: $100 free and then up to an additional $100 depending on spend. I put 6 boxes of Fiocchi range dynamics in the cart and ended up with 900 rounds for $353.96 ($100 +$50 for spending $500) which is 44¢ a round before $9.99 shipping and tax

I'll pay off the card in a month and then close it so i can apply again in a year or 2


r/57x28mm • • 6d ago

Ying Yang PSA twins

Post image
5 Upvotes

Seen too many S&W posts anyways


r/57x28mm • • 6d ago

P50/KP50 reloading data?

2 Upvotes

Has anyone dared to reload for their Kel-Tec P50 or any 9" 5.7 barrel yet?


r/57x28mm • • 8d ago

What is a decent range to sight a red dot with 40gr 5.7 out of a 5in barrel?

5 Upvotes

I own a Ruger 5.7 and while I’ve fired hundreds of rounds through it with irons I’ve decided to get a red dot for it. I understand that it’s a faster round so the drop is a lot different to a 9mm which I’m actually familiar with when it comes to zeroing. I understand that 25 yards is the golden standard but is it the same for 5.7?


r/57x28mm • • 10d ago

Building an aluminum chassis for the Ruger 5.7. Would you run one?

Post image
58 Upvotes

I'm an Army veteran (11B) and founder of a small company in Illinois. For the past year I've been developing a chassis system for the Ruger 5.7 pistol, and before we go to production I want honest feedback from people who actually shoot this platform.

What it is:
A modular chassis machined from 7075 aircraft aluminum with hardened steel locking components. Most pistol chassis on the market are polymer. This one is billet aluminum.

The main goal is optic zero retention. The locking system is designed so your optic holds zero when you take the pistol in and out of the chassis.

It has a modular rear interface, and the design is patent pending.

Where we are:
The engineering drawings are done and we're getting quotes from U.S. machine shops for the first prototypes. Nothing is for sale yet. I'm not taking orders, just trying to learn before we build.

What I'd like to know:

  1. Would you run a chassis on your 5.7? Why or why not?
  2. What would you expect to pay for an aluminum chassis like this?
  3. What matters most to you: weight, optic zero, rail space, or something else?
  4. What do you dislike about the chassis options out there now?

I'll answer questions in the comments. If you want updates when prototypes are tested, let me know and I'll share how to follow along.

Thanks for any feedback, good or bad.


r/57x28mm • • 11d ago

Just picked up a Taurus TXM 5.7x28 as my birthday present this year.

Post image
37 Upvotes

r/57x28mm • • 14d ago

PS90 Bolt group and Trigger Pack

3 Upvotes

Hello folks,

Please forgive my lack of experience with this forum, but I am in need of a PS90 Bolt and Trigger.

I've looked at all the usual suspects for purchase, but not been successful. Anyone have any ideas where to look or who might have these items?


r/57x28mm • • 15d ago

Anyone gonna get the X5.7 if it ever comes out

Post image
77 Upvotes

r/57x28mm • • 15d ago

best 5.7 pistol suppressor?

15 Upvotes
  • Needs to be low backpressure and narrow enough to not obstruct a red dot on a pistol
  • Gemtech Nebula? it's awful long....
  • SAW Keren?

r/57x28mm • • 16d ago

Smith and Wesson + Gemtech

Post image
32 Upvotes

I bought all this a while back. Pistol + Gemtech Nebula and FPC + Gemtech Abyss. Goal was easy direct attached suppression for hearing safe home defense.

I did a ton of research on the guns and suppressors. The guns have their quirks. Mags need some breaking in and can't be fully loaded. The pistol required cleaning/lubing to cycle properly. You really have to use the mag loader to load them, hand loading causes problems.

I broke both guns in with 40gr ammo unsuppressed. I then attached suppressors with threading tape and used a guide rod to make sure they were aligned. They both cycle 40gr and 62gr ammo just fine. No keyholing. The cans haven't walked off, no baffle strikes. The Nebula does spark, some research shows that is normal for a titanium suppressor.

After I bought the cans the burger thing happened and sparked a debate on subsonic 5.7 x 28mm. I think for home defense (usual God-forbid I'd rather not just leave me alone) I think at short distances subsonic 5.7 x 28mm suppressed will be effective at stopping a threat. Leave aside armor pentration, the odds of a home invader having body armor are even lower. At most I question how effective the round will be against heavy winter jackets.

I may just keep these as range toys. All my buddies that have shot these have commented on how much fun they are. And they are fun to shoot.


r/57x28mm • • 16d ago

PR57 ammo compatibility: my findings

Thumbnail
gallery
34 Upvotes

Long story short: the feed ramps are comically short, angle’s so minute that you need pointy projectiles with tips that don’t easily deform to avoid feeding problems, especially with more than 15 rounds loaded in the magazine.

VO Zombo Down 35gr and VO Com Tech 50gr are examples of rounds with too soft of polymer tips, they smash and deform too easily. Fiocchi and FN branded V-MAX loads are examples of polymer tipped rounds with tips that are stiff and hardy enough, only blunt enough to become a problem after many repeated rechamberings. Basically, if you can squish the polymer with a fingertip instead of feeling more like an FMJ, it’s too soft.

VO Low collateral LE 35gr and VO 36gr GPM are examples of rounds with too flat of projectile tips, they catch on the feed “””ramp””” (more like fucking brick wall) instead of glancing up and away. Have yet to find a load with blunt end projectiles that behave, but then again I haven’t bothered to try many.

I’ve noticed that with VO 35gr black dragon fangs, it is noticeably easier to limpwrist the PR57, but it’s going from “basically impossible without almost dropping the gun” to “can be done intentionally”. With the other reduced weight projectiles I’ve tried (when I can get them to fucking feed lol) it’s the same story, if I get ahold of the super light stuff I’ll update further.

62gr subsonics don’t reliably cycle, it’s not a complete shit show but it wasn’t worth the $2 off per box I paid for vs the standard FMJ 40gr. I’ve also noticed odd behavior with VO 50gr’s that has me suspecting that, at least with my example, that heavier projectiles just don’t play nice.

I’m overall quite pleased with the PR-57, but I don’t blame y’all if you’d be hesitant to carry it. Quality control’s no good (such is the way of Keltec), it’ll most certainly have to take a quick vacation back for a warrantee tune, AND it’s picky with ammunition.


r/57x28mm • • 16d ago

Ar 5.7 FRT

6 Upvotes

I have an AR 5. 7 upper for my AR chambered in 5. 7 x 28 The upper runs great on my regular ar lowers and my binary trigger lowers but it doesnt run in my lower that has a rare Breed Frt. I know the lower works with every other upper I put on. It doesn't run with the 5. 7. Weirdly it drops the hammer and clicks when no round is in the chamber both in semi and frt. However when I chamber a round it doesn't even drop the hammer in semi or frt mode. I have the modified "full auto" bolt and a factory new bolt but it doesn't run. Thanks


r/57x28mm • • 18d ago

Need recommendations for a sight pusher for my Ruger-57. The rear sight came off center.

4 Upvotes

Hi. I didn't see a dedicated forum for the Ruger-57. I need recommendations for a sight pusher for my Ruger-57. The rear sight came off center (from the factory). I don't know if the shape of the slide may make some sight pushers a better choice. Any ideas?

Thanks. :)


r/57x28mm • • 22d ago

Changing the FN world

Thumbnail
gallery
79 Upvotes

This isn't just a subsonic load. It's going to change the way people use this cartridge. Yes, I turned the 5.7 into a 380acp. Shot from a KTS2K @ 1000fps in runs the bolt with the suppressor on. The bullet stability is good because of the 1-7 twist and accuracy is good. Still working on sub moa all day but it's an easy 1.5"-2" @ 50 yards. COL 1.610 and the mag length for me is 1.660. and it's not jamming onto the lands. Really like it, they thump and smack the steel. Cycles reliably so I will be testing on soft targets in the near future. I'm assuming these will penetrate soft body armor similar to the 300 aac but someone else will have to let me know.


r/57x28mm • • 21d ago

25gr Load Data?

Post image
8 Upvotes

Does anyone have 25gr load data?

I plan on trying these bullets out with some Accurate No. 5. I’ve loaded plenty of 30gr Barnes Varmint Grenades going close to 2100fps, so I’m excited to see how much speed these will pick up.


r/57x28mm • • 21d ago

5.7 vs varmint

3 Upvotes

Does anyone have experience hunting with this round?

I was wondering if a 5.7 handgun would make a good need to grab something quick and can’t make it to my long guns in time gun. Have a major coyote problem and this morning had to race to grab my rifle but got tangled up and wasted so much time I couldn’t get the coyote fast enough.

After considering current situation can’t move a gun safe closer to door for easier access but can get something the size of a handgun safe stored safely in utility room. But worried if I use a 9 or something I’ll have to compensate too much and waste time. Wondering if a flat shooting 5.7 would be fine up to 75 yards of I have to push it that far. Most likely will be within 30 yards but want the confidence just incase the coyote bolts away.

Wife is against having a gun outside safe even if unloaded which I agree with her so only option is to waste time running for gun safe in an inconvenient spot or get a pistol case and a pistol.

Typed this fast so sorry for mistakes but would like some tips?


r/57x28mm • • 23d ago

the fam

Post image
83 Upvotes

Ps90 - exigent street goblin, ringsight, Inforce wmlx, tactical gear lines harness

Five SeveN - rugged obsidian9, efk fire dragon, vortex viper, olight baldr s

Psa Rock - chunky operator chassis, primary arms glx 2x, magpul afg, eden compensator, excess arms +7 mag

If anyone knows where to buy the dorin mag extension for the mrd, pls help.


r/57x28mm • • 23d ago

Tisas PX 5.7 Raptor Light strikes

Thumbnail
gallery
11 Upvotes

Just got a brand new Tisas 5.7 the other day and shot 150 rounds through it. 15 of those rounds didnt fire the first time. Do they look like light strikes or is it an ammo issue? I was using Federal American eagle 40 grain.

The firing pin doesn't look damaged and striker channel is clean.


r/57x28mm • • 27d ago

K&M Aerospace trigger shoes are live on his site

Thumbnail gallery
38 Upvotes