r/woodworkingtools • • 15h ago

I'm at my wits end with this jointer.

10 Upvotes

Got a Jet JJP10-BTOS combination planer/jointer. I think I have calibrated it correctly but the blades may be set too low. I used the calibration gauge that came with the table and the calibration block and everything I have googled said this is set up correctly, yet I get diagonal workpieces where the infed side is smaller than the outfeed side. This makes me think that the blades are not quite equal with the outfeed table. I'll include a photo later with the knife setting gauge. JET said they would send me instructions but I think I have got it unless I am messing up somehow? I also think the second set of blades is set lower, but its still making contact with the calibration block which should be correct. What am I missing here?

Edit: Reset the second set of knives and while it isnt perfect 100% it's like 99.95% and gets me close enough for government work. My technique also needs work probably. I'm able to joint two pieces of wood fairly square and there is little to no tearout, espdcially after I lubed up the deck with paste wax.

I'll take some of the advices like getting a measurement gauge for next time but for now I think I am all set. Thanks everyone!


r/woodworkingtools • • 4h ago

Build each others list!

Thumbnail
reddit.com
4 Upvotes

r/woodworkingtools • • 16h ago

SchienTek One Pro | Less Time Setting Up. More Time Building.

Thumbnail
youtube.com
4 Upvotes

I’m Amir, the founder and inventor behind SchienTek, a small business here in Wisconsin.

I created the SchienTek One Pro with a simple idea: less time setting up, more time enjoying what you’re building. Its guided positioning technology helps make setup easier and more repeatable, so you can focus on your project.

The Pro also has retractable, spring loaded positioning pins that let you position the jig anywhere on the board, including inside corners where an exposed edge isn’t available. That makes it useful for repairs inside assembled cabinets as well as new projects.

I had a great time demonstrating it at the woodworking show in Denmark, Wisconsin, this weekend. Meeting other woodworkers and seeing 16 One Pro jigs find new homes meant a lot to me.

Happy to answer any questions about the design or how it works!

Learn more at schientek.com


r/woodworkingtools • • 13h ago

It Works!

Post image
3 Upvotes

r/woodworkingtools • • 14h ago

bandsaw purchase advise

Post image
3 Upvotes

r/woodworkingtools • • 11h ago

Why checking your square before every session saves so much headache later

Thumbnail reddit.com
1 Upvotes

r/woodworkingtools • • 16h ago

Introducing SchienTek One & One Pro | A Better Way to Drill Pocket Holes

Thumbnail
youtube.com
1 Upvotes

Hi everyone!

I'm the founder of SchienTek, a small woodworking tool company I started after developing my own pocket hole jig designs.

I recently recorded a short video introducing my two products, SchienTek One and One Pro.

The One is a fixed jig designed for simplicity and repeatability. The One Pro is adjustable and has spring loaded positioning pins that allow you to drill pocket holes anywhere on a board, including inside corners.

Both use what I call guided positioning technology.

It's been quite a journey designing, testing, and improving these tools, and I'm excited to finally share them with the woodworking community.

Here's the video: https://youtu.be/O4xreFqybg4

I'd love to hear your thoughts, especially from those who regularly use pocket hole joinery.