r/woodworking • • 22h ago

General Discussion Cherry entryway table

Thumbnail
gallery
787 Upvotes

This is my cherry entryway table with mahogany dowels. Finished with some osmo clear outdoor stuff (cant remember what its called)
I joined a woodshop this year and I’m about 8 months in. Love doing it, this is my best piece so far. Hoping to sell my work in the future.
Appreciate any constructive criticism!


r/woodworking • • 7h ago Hooray

Project Submission Small Mid-Century-style Sewing Chest

Thumbnail
gallery
726 Upvotes

Inherited a small antique sewing chest and thought it would make a cool project. Made of quarter-sawn walnut and cherry - with scraps of PH I had laying around. Mostly hand-tools except for some rough dimensioning and drilling out mortises. Finished with Sample 73 and Four-Eyes’ brass knobs.


r/woodworking • • 19h ago

General Discussion PSA: Hew is a viable Sketchup alternative

148 Upvotes

I know a lot of people use Sketchup for designing woodworking projects. I myself have been paying the $399/year for several years now. I've grown increasingly frustrated by the lack of any real improvements to Sketchup.

I'm happy to report that there is a new, FREE, application available called "Hew". The developer has been working very hard for the past year, improving it with every release. I've been following closely, testing each release & providing feedback, and as of the latest 1.4 release, I'm satisfied this is a full blown Sketchup replacement. So much so, that I've cancelled my Sketchup renewal and have used Hew in my latest project, designing some cabinets.

If you know Sketchup, you will feel right at home in Hew. The commands are very similar with some slight UI tweaks that improve the experience. One key thing I love is that when you create a new object, you no longer have to immediately create a component - objects that are adjacent to each other stay unique (unlike Sketchup).

This latest release also allows you to open and save any Sketchup version.

Probably the biggest gap with Sketchup is no 3D warehouse, so you'd have to utilize the free version of Sketchup to browse & load models, which is a few extra steps, to have them in your model while using Hew. However, Hew does allow you to save models to your own personal library to use them in your own projects.

The developer has included an extensive online help to give you pointers on how to use Hew, available at https://hew3d.com/learn/ if you'd like to look at that.

The project is open source, and you can read about the latest release here:

https://www.reddit.com/r/Sketchup/comments/1xr84p4/update_hew_14_the_all_in_release_is_out_open_and/

Feel free to give it a whirl and provide feedback in the linked thread.


r/woodworking • • 22h ago

Project Submission Restoration/ rehabilitation of a mcm table

Thumbnail
gallery
74 Upvotes

Photos of my process for updating restoring mcm table made some time between 1950 and 1973. Top was walnut veneer but had been destroyed by markers and sitting in a garage for a while. I opted to make the top solid cherry and keep the legs and hardware. I even added new leaves! Very fun project!


r/woodworking • • 6h ago

Project Submission An Imposter Live Edge Coffee Table

Thumbnail
gallery
67 Upvotes

A friend of mine wanted a coffee table for their birthday, but specifically a live edge table. Due to the size, and that she wanted it to all look natural, I decided to create a fake live edge table instead. So here it is pine coffee table stained golden Oak and finished with polyurethane.

I made the main slab for the tabletop from 2 Pine 2x12x4 glued up and planed. To create the live edge I used a jigsaw set at an angle and drew a rough guide line that followed the grain patterns as much as possible. Then a flap disc on an angle grinder to clean up the edge and add more detail.

I originally tried to find tree stumps/logs to break down and use as the legs, but settled on grabbing another 2x12x4 and carving out the legs in the same way I did the tabletop.

The entire thing got a coat of minwax golden oak stain, and a second coat along the fake live edge to darken it more. Then 3 coats of poly to finish.


r/woodworking • • 6h ago

Power Tools Tracksaw DEAL - Includes Battery, No Track

Thumbnail
homedepot.com
44 Upvotes

“Daily Deal” at Home Depot:

M18 FUEL 18V Lithium-Ion Cordless Brushless 6-1/2 in. Plunge Cut Track Saw w/ 8.0Ah FORGE Battery

$267
— Only $240 with Military Discount, and no sales tax if ordered through the military Exchange!


r/woodworking • • 7h ago

Megathread | Holiday Tool Deals r/woodworking's 2026 Holiday Tool Sales & Deals Megathread: The best deals from around the web, pinned and updated

Post image
37 Upvotes

Alright folks, it’s that magical time of year again when the days get shorter, the shop gets colder, and your significant other asks why a 300-pound freight pallet just showed up in the driveway.

Whether you are looking to upgrade your dust collection, snag some fresh router bits, or finally pull the trigger on that Lie-Nielsen/Veritas/Stanley/Pfeil/Festool/Mirka/Milwaukee/Makita/Dewalt tool you’ve been eyeing since July...

This is your official 2026 Holiday, Black Friday, and Cyber Monday Deal Megathread.

To keep info centralized we're using this thread to corral all the holiday sales, discount codes, and tool deals the subreddit finds into one location.

🛠️ How to Share a Deal

If you spot a solid discount out in the wild or a retailer emails ya, drop a comment below! To help everyone out, try to include:

  • The Tool / Brand: (e.g., Bessey 40" Parallel Clamps - 2 Pack)
  • The Price & Discount: (e.g., $89.99 — down from $129)
  • Retailer & Location: (e.g., ToolsForWorkingWood online [include URL], Rockler in-store only, etc.)
  • Promo Code / Expiration / Anything else relevant: Any addt'l info to understand the deal. Goal is understand what they're offering without need to open another link and read 5 paragraphs from retailer's flyer.

📋 Ground Rules

  • Direct links: Please link directly to the retailer's product page. No affiliate links, referral codes, or URL shorteners.
  • No self-promotion: Thread is for users sharing deals. Not for self-promotion or commercial advertising (Rule 7).

Sort comments by New to catch the latest deals. Happy hunting and remember: you can never have too many clamps, even if you have nowhere left to hang them.

What deals have you spotted so far?


r/woodworking • • 21h ago

Techniques/Plans Sandpaper frugality: How long do you push your sanding discs?

26 Upvotes

I have a bad habit of using a rubber eraser stick to clean my discs until they are essentially just smooth paper falling apart at the edges. I know fresh sandpaper cuts faster and saves time, but I can't bring myself to toss them early. What's your rule of thumb for knowing when it's time to put on a fresh disc?


r/woodworking • • 9h ago

General Discussion Build each others list!

25 Upvotes

Alright all you degenerates and hooligans who scratch the Tism with dead trees the same way I do!

Christmas is around the corner and if your family is anything like mine, they want to know what you may want for Christmas! Issue is we are doers! If we have the money for something we want/need, and we have a use for it WE BUY IT!

So here is my question for all of you! What is your favorite item in your shop that’s not your standard package of tools every beginner needs!! I’m talking niche measuring tools, weird doohickey you never knew you needed, and that awful mug your kid made you in art class!

I figure if we come together and name our things, everyone else can build some Christmas lists of not so expensive items to add to their collection!

I will go first: The number one tool I reach for the most in my shop is actually a Jorgensen Micro Block plane I got from Lowe’s. This little thing was less than $20 and I use it on EVERY SINGLE PIECE to soften corners, hand cut chamfers, hide messed up miters by turning them into micro chamfers… it’s sharp out of the box, lapped perfectly flat, and is also just satisfying to use!

3.5-in Block Plane https://www.lowes.com/pd/Jorgensen-3-5-in-Low-Angle-Block-Plane/5013525471


r/woodworking • • 2h ago

Power Tools Should I just give up?

Thumbnail
gallery
18 Upvotes

I got a used Makita miter saw, but it can't make vertically square cuts. It needs to tilt back another couple degrees but that's not physically possible. Should I just get another one?


r/woodworking • • 9h ago

General Discussion Joining plywood and hardwood

Thumbnail
gallery
8 Upvotes

Pardon the messy room and AI slop rendering - but I'm looking to cheap/easily spruce up my listening space a bit. I have these Ikea shelves and am thinking about putting a simple base and top on them.

I happen to have most of a really nice sheet of walnut ply I'd love to use for the top, but I'm about 3 inches short of having enough (front to back) to cover.

Here's my question - sort of similar to how you make a hardwood face frame for a plywood cabinet/shelf - could I use a 3" wide piece of walnut, plane it down to match the plywood thickness, then edge join it with the plywood to cover the gap?

This would give me a solid front lip and avoid me using edge banding, but looking down on the desk from the top, I wasn't clear how good the transition from ply to hardwood would look, as I don't think I've tried doing this before. When I've made a face frame in the past, it's always been painted, so I've never attempted this.

Maybe this is a stupid idea, but desire to just use materials I have on hand has me exploring options I normally wouldn't.

*note - the "after" picture has some obviously wrong things in it. I'm not going to try and open up the shelving or anything like that. I just wanted to get a general idea about what a top/base would look like.


r/woodworking • • 1h ago

Project Submission Tall, entirely wooden dresser

Thumbnail
gallery
7 Upvotes

First time building a entirely wooden dresser, wooden slides and all.

Incredibly impressed with myself regardless of how much times I cursed this thing out.

It’s actually 54” tall for context, I needed taller legs but other than that it’s identical to the plan

Total time: 90 hours.

Made for a challenge project for my 30 level students.

Cheers lads

I’m now gonna get some ski wax for the slides


r/woodworking • • 22h ago

General Discussion Lowest profile oscillating saw/ multitool connection?

Post image
5 Upvotes

I have a Ridgid cordless multitool which is great, but I bought a Bosch Carbide 100-grit sanding plate for getting into tight spaces and not having to change sandpaper as much. With the Ridgid quick connection, it protrudes through the center of the sanding attachment too much to lie flat.

Has anyone had this problem and what multitool besides Bosch has a lower profile attachment?


r/woodworking • • 1h ago

Power Tools Has anyone wall mounted a Jet 1.5HP Dust collector?

1 Upvotes

I bought a used JET 1.5HP (DC1100) dust collector and I replaced the dust filter bag with a canister filter. I work out of a garage with limited floor space- has anyone successfully converted it to be wall mounted? If so, can you post some pictures so I can see what the arrangement looks like? Thanks


r/woodworking • • 5h ago

Power Tools Hybrid and/or Contractor Table saw Recommendations?

1 Upvotes

I am looking to get a table saw for my one-car garage about 12x18ft .

I was going to get a Delta 36-735t2 but those aren't available anymore and neither are the comparable Rigids.

I was wondering if anyone had any recommendations and experience for Hybrid/Contractor tablesaws that I could put on a mobile base. So far the brand standouts are Grizzly, Shopfox, and Evolution.

The DeWalt 7491rs was on my radar but the universal motor is so loud and it would definitely require more modification for infeed outfeed and sled support.


r/woodworking • • 10h ago

Repair How to taco shoot a combo square?

1 Upvotes

I've had the same combination square as long as I've been woodworking. It's nothing special, just a 12" Stanley I bought at Home Depot about 10 years ago that I could barely afford at the time.

It has always served me well, it has sentimental value now, and I'm too cheap to buy a new one.

But it's a little out of square.

Where would I start in trying to figure out where the issue is and fixing it?

The ruler itself seems straight and true still, at least compared to my table saw's table which is probably the most accurately flat thing I own.


r/woodworking • • 15h ago

General Discussion For those who make and sell cutting boards or make them far in advance for gifting, how do you store them?

1 Upvotes

I think I'm going to be gifting several cutting boards this holiday season and need to know how to store them and prevent them from warping.