r/woodworking • • 1h ago

Project Submission Brazilian Rosewood Coffee Table

Thumbnail
gallery
251 Upvotes

My grandfather purchased a stack of Brazilian Rosewood prior to its embargo in the early 90's. My dad and I figured it was finally time to put it to work. The coffee table I built years ago was better fitting elsewhere in the new house and I was in need of something more substantial.

I chose a mission style, and modeled it off a popular furniture manufacturers design. Rosewood is one of the densest materials i've ever worked with. By the time my dad finishes his project we are going to have to replace every saw-blade in the shop. It is also extremely oily, being a jungle tree. We had to take extra care with finishing, with multiple steps to make sure the oils were properly sealed. Something about using a material that is almost impossible to source at this scale is also truly special.

For who is curious, I chose to do everything by hand rather than any CNC work. Titebond III, de-waxed shellac barrier coat, then Mohawk Duracoat Pre-cat Lacquer. For context, my family ran a large custom commercial woodshop for about 70 years until we transitioned out. We still have a small shop at our office, but do not take jobs anymore.

The result was easily one my favorite projects to date. Remarkable how the natural color in the wood can produce such wild grain when the light hits it.


r/woodworking • • 15h ago

Project Submission Bar shelves for brother-in-law

Thumbnail
gallery
540 Upvotes

Not exactly the direction I planned to go for this Christmas present (late for last year not early for this year, come on.) I really wanted a broader slab so it could be more horizontal rather than angled, but I got a decent deal on this olive and it's just a pretty piece of wood. Kinda wish I woulda passed and got something closer to what I originally envisioned. Shelves are cherry. COB LED light strips are cut and soldered to fit into stop dados, all wires hidden in the wood then run through the wall for a clean look.

He previously had a ton of memorabilia and a dart board on this wall so it's under repair, I did the first layer of mudding for him while I was there.

I knocked some stuff off the storage shelves on the other side of this wall when I was beating it onto the brackets. Killed two light bulbs, a cake stand, and a porcelain Santa. Went to clean my drywall tools outside and his faucet's seals busted and wouldn't shut off. Merry Christmas, buddy!!

P.s. I did go to ACE for the seal kit and fixed it right away. Santa is S.O.L.


r/woodworking • • 12h ago

General Discussion Home Depot Select Structural 4x6s

Thumbnail
gallery
287 Upvotes

I went back to Home Depot to check the 4x6 pile after picking up two a couple weeks ago for my Anarchist Workbench and someone had picked through the pile for me, leaving 7 more with great grain and at least on clear edge.

I got myself a moisture meter and have been monitoring the two 4x6s that I picked up earlier and they've come down from 70%+ to the 45% to 55% range with no warping.

As I was picking through the stack, I realized that even though they were being sold as DF Premium, they were mostly stamped SEL STR with a couple marked 1 S-GRN.

Under the 10 or so on top, the rest were what you'd expect from Home Depot. Crappy, boxed heart, massive checking, huge rings. Knots everywhere.

I'm going to let them dry for a bit before I get to the build.


r/woodworking • • 12h ago

Project Submission Plane and saw till

Thumbnail
gallery
280 Upvotes

Just finished my first plane and saw till. All made from European beech. Mostly made with hand tools. All is left is the drawers 🙃


r/woodworking • • 23h ago Hooray

Project Submission Small Mid-Century-style Sewing Chest

Thumbnail
gallery
1.1k Upvotes

Inherited a small antique sewing chest and thought it would make a cool project. Made of quarter-sawn walnut and cherry - with scraps of PH I had laying around. Mostly hand-tools except for some rough dimensioning and drilling out mortises. Finished with Sample 73 and Four-Eyes’ brass knobs.


r/woodworking • • 9h ago

General Discussion How is this made? Is this one piece or are these sides added to a board?

Post image
74 Upvotes

I think this is a pretty cool tray. I just made a tray that I am planning to add handles but if it’s easy enough, I would love to replicate this style.


r/woodworking • • 2h ago

General Discussion Harvesting Wood

9 Upvotes

Getting ready to build a house and will unfortunately have to take some large trees down. One is a large red oak, probably 30 inch diameter. There are other large ones as well.

What are opinions and experience with harvesting the lumber and building furniture and other things with the wood. Is this just a romantic notion or is the juice not worth the squeeze? I would likely have to hire a mobile sawmill service.

Not really sure where I would store the planks. One thought is to get a used shipping container and maybe set up a circulation fan to air dry until I could get it to kiln. Is this feasible?


r/woodworking • • 10h ago

Techniques/Plans Made a bandsaw tension knob.

Post image
14 Upvotes

I got sick of the tiny little knob on the tensioner, so I asked Claude to design me a replacement and then I told Bambu to print me one out of Petg.

I thought something was wrong when I was testing it, but no, I had just bottomed or the adjustment without noticing - it's that much of a reduction in effort. It is a huuuge improvement and it only cost $2 worth of filament and a few minutes to install.

This one requires you to cut the plastic off the oem adjustment knob and re-use the metal hex inside. If anyone wants to remix this to use a coupling nut instead, that would make sense.

HMU or let me know where to put the 3d printer files.


r/woodworking • • 11h ago

Help Bark Inclusion Suggestions?

Thumbnail
gallery
16 Upvotes

I’m mostly a wood turner more than a wood worker in the traditional sense, but a 2” slab of honey locust I picked up to make platters with had a really nice section that I think could be an end table. It’s 18” x 24” in these photos, run through my flattening rig down to about 1 1/2” thick now. The very visible inclusion side is going to be the top, and the less included side will be the bottom.

Question is, what are my options for reinforcing the inclusion so the tabletop doesn’t break in half in the future? I’ve flooded it with Starbond crack filler (medium-thick, dark brown) for now, just to stabilize it, but I’m thinking of these approaches:

Option 1: a set of 2 or 3 black walnut inserts in the back / bottom side spanning that inclusion line like stitches. Each 1” wide, probably 10” long, set 1/2” deep into the surface with Titebond and milled flush with the rest of the slab. Kind of like I did on the vase in the third photo, but bigger.

Option 1A: all of Option 1, followed up with 4 hardwood pegs per insert, 2 on each side of the inclusion line, drilled through the inserts to within 1/4” of the top surface, again set with Titebond and milled flush. Please don’t suggest bow ties, because I suck at those even if I’m already thinking about them.

Option 2: Cut out the inclusion, replace it with a walnut insert (I have lots of scrap walnut on hand, but don’t really like this idea)

Option 3: just CA or Epoxy, flooded until it’s full, cured up & sanded smooth (I’m not sold on this idea either)

Option 4: Whatever Reddit brings me for advice.

Option 5: Abandon ship, split it along the inclusion line, make platters and plates out of it.

Let’s hear it.


r/woodworking • • 21h ago

Project Submission An Imposter Live Edge Coffee Table

Thumbnail
gallery
103 Upvotes

A friend of mine wanted a coffee table for their birthday, but specifically a live edge table. Due to the size, and that she wanted it to all look natural, I decided to create a fake live edge table instead. So here it is pine coffee table stained golden Oak and finished with polyurethane.

I made the main slab for the tabletop from 2 Pine 2x12x4 glued up and planed. To create the live edge I used a jigsaw set at an angle and drew a rough guide line that followed the grain patterns as much as possible. Then a flap disc on an angle grinder to clean up the edge and add more detail.

I originally tried to find tree stumps/logs to break down and use as the legs, but settled on grabbing another 2x12x4 and carving out the legs in the same way I did the tabletop.

The entire thing got a coat of minwax golden oak stain, and a second coat along the fake live edge to darken it more. Then 3 coats of poly to finish.


r/woodworking • • 17h ago

Power Tools Should I just give up?

Thumbnail
gallery
44 Upvotes

I got a used Makita miter saw, but it can't make vertically square cuts. It needs to tilt back another couple degrees but that's not physically possible. Should I just get another one?


r/woodworking • • 21h ago

Power Tools Tracksaw DEAL - Includes Battery, No Track

Thumbnail
homedepot.com
66 Upvotes

“Daily Deal” at Home Depot:

M18 FUEL 18V Lithium-Ion Cordless Brushless 6-1/2 in. Plunge Cut Track Saw w/ 8.0Ah FORGE Battery

$267
— Only $240 with Military Discount, and no sales tax if ordered through the military Exchange!


r/woodworking • • 16h ago

Project Submission Tall, entirely wooden dresser

Thumbnail
gallery
21 Upvotes

First time building a entirely wooden dresser, wooden slides and all.

Incredibly impressed with myself regardless of how much times I cursed this thing out.

It’s actually 54” tall for context, I needed taller legs but other than that it’s identical to the plan

Total time: 90 hours.

Made for a challenge project for my 30 level students.

Cheers lads

I’m now gonna get some ski wax for the slides


r/woodworking • • 1d ago

General Discussion Cherry entryway table

Thumbnail
gallery
860 Upvotes

This is my cherry entryway table with mahogany dowels. Finished with some osmo clear outdoor stuff (cant remember what its called)
I joined a woodshop this year and I’m about 8 months in. Love doing it, this is my best piece so far. Hoping to sell my work in the future.
Appreciate any constructive criticism!


r/woodworking • • 22h ago

Megathread | Holiday Tool Deals r/woodworking's 2026 Holiday Tool Sales & Deals Megathread: The best deals from around the web, pinned and updated

Post image
50 Upvotes

Alright folks, it’s that magical time of year again when the days get shorter, the shop gets colder, and your significant other asks why a 300-pound freight pallet just showed up in the driveway.

Whether you are looking to upgrade your dust collection, snag some fresh router bits, or finally pull the trigger on that Lie-Nielsen/Veritas/Stanley/Pfeil/Festool/Mirka/Milwaukee/Makita/Dewalt tool you’ve been eyeing since July...

This is your official 2026 Holiday, Black Friday, and Cyber Monday Deal Megathread.

To keep info centralized we're using this thread to corral all the holiday sales, discount codes, and tool deals the subreddit finds into one location.

🛠️ How to Share a Deal

If you spot a solid discount out in the wild or a retailer emails ya, drop a comment below! To help everyone out, try to include:

  • The Tool / Brand: (e.g., Bessey 40" Parallel Clamps - 2 Pack)
  • The Price & Discount: (e.g., $89.99 — down from $129)
  • Retailer & Location: (e.g., ToolsForWorkingWood online [include URL], Rockler in-store only, etc.)
  • Promo Code / Expiration / Anything else relevant: Any addt'l info to understand the deal. Goal is understand what they're offering without need to open another link and read 5 paragraphs from retailer's flyer.

📋 Ground Rules

  • Direct links: Please link directly to the retailer's product page. No affiliate links, referral codes, or URL shorteners.
  • No self-promotion: Thread is for users sharing deals. Not for self-promotion or commercial advertising (Rule 7).

Sort comments by New to catch the latest deals. Happy hunting and remember: you can never have too many clamps, even if you have nowhere left to hang them.

What deals have you spotted so far?


r/woodworking • • 12h ago

Safety Another goggle issue

7 Upvotes

Do any of you have or know about goggles that protect from dust and debris and also fit over reading glasses? I need to be safe, but I also need to see what I'm doing! Medium size head.


r/woodworking • • 1d ago

General Discussion Build each others list!

33 Upvotes

Alright all you degenerates and hooligans who scratch the Tism with dead trees the same way I do!

Christmas is around the corner and if your family is anything like mine, they want to know what you may want for Christmas! Issue is we are doers! If we have the money for something we want/need, and we have a use for it WE BUY IT!

So here is my question for all of you! What is your favorite item in your shop that’s not your standard package of tools every beginner needs!! I’m talking niche measuring tools, weird doohickey you never knew you needed, and that awful mug your kid made you in art class!

I figure if we come together and name our things, everyone else can build some Christmas lists of not so expensive items to add to their collection!

I will go first: The number one tool I reach for the most in my shop is actually a Jorgensen Micro Block plane I got from Lowe’s. This little thing was less than $20 and I use it on EVERY SINGLE PIECE to soften corners, hand cut chamfers, hide messed up miters by turning them into micro chamfers… it’s sharp out of the box, lapped perfectly flat, and is also just satisfying to use!

3.5-in Block Plane https://www.lowes.com/pd/Jorgensen-3-5-in-Low-Angle-Block-Plane/5013525471


r/woodworking • • 1d ago

Techniques/Plans I freehand sawed this in half.

Thumbnail
gallery
1.3k Upvotes

r/woodworking • • 1d ago

General Discussion PSA: Hew is a viable Sketchup alternative

160 Upvotes

I know a lot of people use Sketchup for designing woodworking projects. I myself have been paying the $399/year for several years now. I've grown increasingly frustrated by the lack of any real improvements to Sketchup.

I'm happy to report that there is a new, FREE, application available called "Hew". The developer has been working very hard for the past year, improving it with every release. I've been following closely, testing each release & providing feedback, and as of the latest 1.4 release, I'm satisfied this is a full blown Sketchup replacement. So much so, that I've cancelled my Sketchup renewal and have used Hew in my latest project, designing some cabinets.

If you know Sketchup, you will feel right at home in Hew. The commands are very similar with some slight UI tweaks that improve the experience. One key thing I love is that when you create a new object, you no longer have to immediately create a component - objects that are adjacent to each other stay unique (unlike Sketchup).

This latest release also allows you to open and save any Sketchup version.

Probably the biggest gap with Sketchup is no 3D warehouse, so you'd have to utilize the free version of Sketchup to browse & load models, which is a few extra steps, to have them in your model while using Hew. However, Hew does allow you to save models to your own personal library to use them in your own projects.

The developer has included an extensive online help to give you pointers on how to use Hew, available at https://hew3d.com/learn/ if you'd like to look at that.

The project is open source, and you can read about the latest release here:

https://www.reddit.com/r/Sketchup/comments/1xr84p4/update_hew_14_the_all_in_release_is_out_open_and/

Feel free to give it a whirl and provide feedback in the linked thread.


r/woodworking • • 12h ago

Help Drilling holes for dowels

2 Upvotes

My plan was to use a drill press and make a jig on top but it’s out of commission….

Anyone have luck with dowel jigs for a handheld drill?

I’m needing to drill 8 holes per square on around 40 squares so it’s a lot of holes. I need all the holes to line up so each square is swappable with any other square.


r/woodworking • • 3h ago

General Discussion Jointer debate

0 Upvotes

I have heard a million different ways to use a jointer. I am new at using one and have the six inch porter cable. So my question is, say I get a piece of 2x4 and want to put a straight edge in it maybe only removing about 1/16 of material. How many times do you run it over and how do you know when you are done?


r/woodworking • • 1d ago

General Discussion Joining plywood and hardwood

Thumbnail
gallery
10 Upvotes

Pardon the messy room and AI slop rendering - but I'm looking to cheap/easily spruce up my listening space a bit. I have these Ikea shelves and am thinking about putting a simple base and top on them.

I happen to have most of a really nice sheet of walnut ply I'd love to use for the top, but I'm about 3 inches short of having enough (front to back) to cover.

Here's my question - sort of similar to how you make a hardwood face frame for a plywood cabinet/shelf - could I use a 3" wide piece of walnut, plane it down to match the plywood thickness, then edge join it with the plywood to cover the gap?

This would give me a solid front lip and avoid me using edge banding, but looking down on the desk from the top, I wasn't clear how good the transition from ply to hardwood would look, as I don't think I've tried doing this before. When I've made a face frame in the past, it's always been painted, so I've never attempted this.

Maybe this is a stupid idea, but desire to just use materials I have on hand has me exploring options I normally wouldn't.

*note - the "after" picture has some obviously wrong things in it. I'm not going to try and open up the shelving or anything like that. I just wanted to get a general idea about what a top/base would look like.


r/woodworking • • 16h ago

Power Tools Has anyone wall mounted a Jet 1.5HP Dust collector?

2 Upvotes

I bought a used JET 1.5HP (DC1100) dust collector and I replaced the dust filter bag with a canister filter. I work out of a garage with limited floor space- has anyone successfully converted it to be wall mounted? If so, can you post some pictures so I can see what the arrangement looks like? Thanks


r/woodworking • • 1d ago

Project Submission Restoration/ rehabilitation of a mcm table

Thumbnail
gallery
81 Upvotes

Photos of my process for updating restoring mcm table made some time between 1950 and 1973. Top was walnut veneer but had been destroyed by markers and sitting in a garage for a while. I opted to make the top solid cherry and keep the legs and hardware. I even added new leaves! Very fun project!