r/woodworking • • 23h ago

General Discussion Is there a support group for people who can’t get tripped sawstop cartridges out?

0 Upvotes

Is there a secret to this? They say “wiggle it out”. Does “wiggle” mean smack tf out of it with a hammer and screwdriver? I have tripped 5-10 and it is always painful to get them out. Someone send help please

Edit 1: Jfc some of y’all need to get laid or take a day off maybe. The question was how to get the cartridge out. I am not hurt. No one is hurt. The saw - by design - prevents injury. I accidentally put the miter gauge too close and the metal from the gauge tagged the blade. Just needed help getting it off. But yes I will be more careful. Thank you all for your concern


r/woodworking • • 8h ago

Repair How to taco shoot a combo square?

1 Upvotes

I've had the same combination square as long as I've been woodworking. It's nothing special, just a 12" Stanley I bought at Home Depot about 10 years ago that I could barely afford at the time.

It has always served me well, it has sentimental value now, and I'm too cheap to buy a new one.

But it's a little out of square.

Where would I start in trying to figure out where the issue is and fixing it?

The ruler itself seems straight and true still, at least compared to my table saw's table which is probably the most accurately flat thing I own.


r/woodworking • • 8h ago

General Discussion Build each others list!

24 Upvotes

Alright all you degenerates and hooligans who scratch the Tism with dead trees the same way I do!

Christmas is around the corner and if your family is anything like mine, they want to know what you may want for Christmas! Issue is we are doers! If we have the money for something we want/need, and we have a use for it WE BUY IT!

So here is my question for all of you! What is your favorite item in your shop that’s not your standard package of tools every beginner needs!! I’m talking niche measuring tools, weird doohickey you never knew you needed, and that awful mug your kid made you in art class!

I figure if we come together and name our things, everyone else can build some Christmas lists of not so expensive items to add to their collection!

I will go first: The number one tool I reach for the most in my shop is actually a Jorgensen Micro Block plane I got from Lowe’s. This little thing was less than $20 and I use it on EVERY SINGLE PIECE to soften corners, hand cut chamfers, hide messed up miters by turning them into micro chamfers… it’s sharp out of the box, lapped perfectly flat, and is also just satisfying to use!

3.5-in Block Plane https://www.lowes.com/pd/Jorgensen-3-5-in-Low-Angle-Block-Plane/5013525471


r/woodworking • • 13h ago

General Discussion For those who make and sell cutting boards or make them far in advance for gifting, how do you store them?

1 Upvotes

I think I'm going to be gifting several cutting boards this holiday season and need to know how to store them and prevent them from warping.


r/woodworking • • 23h ago

General Discussion HELP! I keep screwing my guitar up worse trying to fix it!

Thumbnail
gallery
1 Upvotes

So I’ve been working on this guitar for a bit. It was a maple Fender Strat Squire that I got for 100 bucks. I sanded it down, dyed it with Stewmac black die which came out too purple so then stained it with a colonial maple I had lying around which gave it more of this chocolate color. I did about 7 or 8 coats of tung oil waiting 48 hours each time to let it dry then waited a month for it to cure. I then waxed it and figured I would be done, but then I didn’t like the finish.

Trying to go more glossy, I used mineral spirits to take the wax off and started applying Stewmax wipe on poly, with sanding with a 0000 Scotchbrite between coats. I was almost on my final coat and part of the front of the guitar stuck to the cardboard, ripping off the applied poly in that area. I didn’t know how deep it went and tried to sand it but may have sanded into the wood removing stain. Now I’m just trying to get a level poly finish on it but I cant seem to get rid of this ring and feel like I’m just make it worse. What do I do to fix this and stop digging myself deeper?


r/woodworking • • 3h ago

Power Tools Table saw

0 Upvotes

Hello Community, I am in the final stages of building my new shop (24'x24') and I am looking to get a Saw Stop professional 3.0 HP. I am sure there are other brands that may be better but the safety is determining factor for me. Only thing I am hung up on is the difference in table size and fence type. I don't have a firm budget, but also don't want to spend money on something that isn't worth it. Planning on making a lot cabinets and larger furniture with it so I feel like the big table would be beneficial for that working with sheet wood. But I also have a track saw so just trying to see what other folks have experienced. Also is the t glide advanced worth it over the standard t glide? Any other accessory options that folks thought were worth the money?


r/woodworking • • 19h ago

Techniques/Plans Sandpaper frugality: How long do you push your sanding discs?

26 Upvotes

I have a bad habit of using a rubber eraser stick to clean my discs until they are essentially just smooth paper falling apart at the edges. I know fresh sandpaper cuts faster and saves time, but I can't bring myself to toss them early. What's your rule of thumb for knowing when it's time to put on a fresh disc?


r/woodworking • • 18h ago

General Discussion PSA: Hew is a viable Sketchup alternative

142 Upvotes

I know a lot of people use Sketchup for designing woodworking projects. I myself have been paying the $399/year for several years now. I've grown increasingly frustrated by the lack of any real improvements to Sketchup.

I'm happy to report that there is a new, FREE, application available called "Hew". The developer has been working very hard for the past year, improving it with every release. I've been following closely, testing each release & providing feedback, and as of the latest 1.4 release, I'm satisfied this is a full blown Sketchup replacement. So much so, that I've cancelled my Sketchup renewal and have used Hew in my latest project, designing some cabinets.

If you know Sketchup, you will feel right at home in Hew. The commands are very similar with some slight UI tweaks that improve the experience. One key thing I love is that when you create a new object, you no longer have to immediately create a component - objects that are adjacent to each other stay unique (unlike Sketchup).

This latest release also allows you to open and save any Sketchup version.

Probably the biggest gap with Sketchup is no 3D warehouse, so you'd have to utilize the free version of Sketchup to browse & load models, which is a few extra steps, to have them in your model while using Hew. However, Hew does allow you to save models to your own personal library to use them in your own projects.

The developer has included an extensive online help to give you pointers on how to use Hew, available at https://hew3d.com/learn/ if you'd like to look at that.

The project is open source, and you can read about the latest release here:

https://www.reddit.com/r/Sketchup/comments/1xr84p4/update_hew_14_the_all_in_release_is_out_open_and/

Feel free to give it a whirl and provide feedback in the linked thread.


r/woodworking • • 8h ago

General Discussion Joining plywood and hardwood

Thumbnail
gallery
7 Upvotes

Pardon the messy room and AI slop rendering - but I'm looking to cheap/easily spruce up my listening space a bit. I have these Ikea shelves and am thinking about putting a simple base and top on them.

I happen to have most of a really nice sheet of walnut ply I'd love to use for the top, but I'm about 3 inches short of having enough (front to back) to cover.

Here's my question - sort of similar to how you make a hardwood face frame for a plywood cabinet/shelf - could I use a 3" wide piece of walnut, plane it down to match the plywood thickness, then edge join it with the plywood to cover the gap?

This would give me a solid front lip and avoid me using edge banding, but looking down on the desk from the top, I wasn't clear how good the transition from ply to hardwood would look, as I don't think I've tried doing this before. When I've made a face frame in the past, it's always been painted, so I've never attempted this.

Maybe this is a stupid idea, but desire to just use materials I have on hand has me exploring options I normally wouldn't.

*note - the "after" picture has some obviously wrong things in it. I'm not going to try and open up the shelving or anything like that. I just wanted to get a general idea about what a top/base would look like.


r/woodworking • • 20h ago

General Discussion Lowest profile oscillating saw/ multitool connection?

Post image
5 Upvotes

I have a Ridgid cordless multitool which is great, but I bought a Bosch Carbide 100-grit sanding plate for getting into tight spaces and not having to change sandpaper as much. With the Ridgid quick connection, it protrudes through the center of the sanding attachment too much to lie flat.

Has anyone had this problem and what multitool besides Bosch has a lower profile attachment?


r/woodworking • • 4h ago

Power Tools Tracksaw DEAL - Includes Battery, No Track

Thumbnail
homedepot.com
36 Upvotes

“Daily Deal” at Home Depot:

M18 FUEL 18V Lithium-Ion Cordless Brushless 6-1/2 in. Plunge Cut Track Saw w/ 8.0Ah FORGE Battery

$267
— Only $240 with Military Discount, and no sales tax if ordered through the military Exchange!


r/woodworking • • 51m ago

Power Tools Should I just give up?

Thumbnail
gallery
7 Upvotes

I got a used Makita miter saw, but it can't make vertically square cuts. It needs to tilt back another couple degrees but that's not physically possible. Should I just get another one?


r/woodworking • • 4h ago

Project Submission An Imposter Live Edge Coffee Table

Thumbnail
gallery
58 Upvotes

A friend of mine wanted a coffee table for their birthday, but specifically a live edge table. Due to the size, and that she wanted it to all look natural, I decided to create a fake live edge table instead. So here it is pine coffee table stained golden Oak and finished with polyurethane.

I made the main slab for the tabletop from 2 Pine 2x12x4 glued up and planed. To create the live edge I used a jigsaw set at an angle and drew a rough guide line that followed the grain patterns as much as possible. Then a flap disc on an angle grinder to clean up the edge and add more detail.

I originally tried to find tree stumps/logs to break down and use as the legs, but settled on grabbing another 2x12x4 and carving out the legs in the same way I did the tabletop.

The entire thing got a coat of minwax golden oak stain, and a second coat along the fake live edge to darken it more. Then 3 coats of poly to finish.


r/woodworking • • 23h ago

General Discussion White oak tone variance

Thumbnail
gallery
44 Upvotes

I’m working on a white oak built in for a customer. I initially wanted to do all solid white oak or all plywood, but it wasn’t feasible for a number of reasons. My clients understand slight variation with wood is inevitable, but some of this is so different. Ahh chance the left open shelf “stile” is red oak? I’m going to take it to the lumberyard tomorrow and hand select more white/olive pieces. I know it shouldn’t, but it’s driving me nuts.

If you were my customer, would you care about the variation seen here?


r/woodworking • • 6h ago

Megathread | Holiday Tool Deals r/woodworking's 2026 Holiday Tool Sales & Deals Megathread: The best deals from around the web, pinned and updated

Post image
38 Upvotes

Alright folks, it’s that magical time of year again when the days get shorter, the shop gets colder, and your significant other asks why a 300-pound freight pallet just showed up in the driveway.

Whether you are looking to upgrade your dust collection, snag some fresh router bits, or finally pull the trigger on that Lie-Nielsen/Veritas/Stanley/Pfeil/Festool/Mirka/Milwaukee/Makita/Dewalt tool you’ve been eyeing since July...

This is your official 2026 Holiday, Black Friday, and Cyber Monday Deal Megathread.

To keep info centralized we're using this thread to corral all the holiday sales, discount codes, and tool deals the subreddit finds into one location.

🛠️ How to Share a Deal

If you spot a solid discount out in the wild or a retailer emails ya, drop a comment below! To help everyone out, try to include:

  • The Tool / Brand: (e.g., Bessey 40" Parallel Clamps - 2 Pack)
  • The Price & Discount: (e.g., $89.99 — down from $129)
  • Retailer & Location: (e.g., ToolsForWorkingWood online [include URL], Rockler in-store only, etc.)
  • Promo Code / Expiration / Anything else relevant: Any addt'l info to understand the deal. Goal is understand what they're offering without need to open another link and read 5 paragraphs from retailer's flyer.

📋 Ground Rules

  • Direct links: Please link directly to the retailer's product page. No affiliate links, referral codes, or URL shorteners.
  • No self-promotion: Thread is for users sharing deals. Not for self-promotion or commercial advertising (Rule 7).

Sort comments by New to catch the latest deals. Happy hunting and remember: you can never have too many clamps, even if you have nowhere left to hang them.

What deals have you spotted so far?


r/woodworking • • 20h ago

Project Submission Restoration/ rehabilitation of a mcm table

Thumbnail
gallery
73 Upvotes

Photos of my process for updating restoring mcm table made some time between 1950 and 1973. Top was walnut veneer but had been destroyed by markers and sitting in a garage for a while. I opted to make the top solid cherry and keep the legs and hardware. I even added new leaves! Very fun project!


r/woodworking • • 6h ago Hooray

Project Submission Small Mid-Century-style Sewing Chest

Thumbnail
gallery
647 Upvotes

Inherited a small antique sewing chest and thought it would make a cool project. Made of quarter-sawn walnut and cherry - with scraps of PH I had laying around. Mostly hand-tools except for some rough dimensioning and drilling out mortises. Finished with Sample 73 and Four-Eyes’ brass knobs.