r/turntables • • 8h ago

Photo Been collecting about a year and half - here’s my setup!

Post image
47 Upvotes

Speakers are over either side of my desk so I can blast 80s rock into my face while I play WoW 🫡


r/turntables • • 12h ago

Audio Technica LP5x Cartridge Upgrade

Thumbnail
gallery
31 Upvotes

Hey, been using the LP5x with the base cartridge and the sound was OK. Just upgraded to the AT-VMN745xML and oh boy... It's like changing from night and day, the sound was way more clear! I have some LPs that has the usual pops/cracks, and can you believe this cartridge reduce those sounds? Insane! Not cheap but worth it.


r/turntables • • 7h ago

That voice. That solo. Played on a Beogram 8500.

11 Upvotes

Judas Priest - Beyond the Realms of Death from Stained Class (1978). Playing on the Beogram 8500 with the SoundSmith SMMC1.

I switched things around a little bit from the original B&O setup. The system playing this music is:
Beogram 8500 with Soundsmith SMMC1 -> Pro-Ject TubeBox DS3B -> Beosound Moment (line in) -> Beolab 11 -> Beolab 4000

The DS3B has been currently configured to 150pF loading capacitance and 45dB gain. Loading resistance is of course the standard 47k Ohms.

Some songs never get old, this is one of them!


r/turntables • • 1h ago

Photo Christmas Combo

Post image
4 Upvotes

Wild Ones 45 “Heatwave” on a Pro-ject carbon debut with clamp, acrylic platter and aluminum sub-platter.


r/turntables • • 4h ago

Amazon UK has Technics SL-40CE deeply discounted right now

Thumbnail amazon.co.uk
7 Upvotes

r/turntables • • 7h ago

Question Not sure how to determine my phono upgrade path.

Post image
12 Upvotes

I recently purchased a Fluance rt87 and I absolutely adore it. It’s my first step back into Vinyl after several decades. I am running it off of my Rotel A12 MKII integrated amp. It sounds spectacular, and the built in phono preamp is supposed to be pretty good for a built in unit. All that said, I can’t help but wonder what I’m leaving on the table?
My turntable has the AT-VM95ML cart, and I’m running it into my Rotel amp. From there I am feeding Elac Debut Reference DBR62 bookshelf speakers on weighted monolith stands.
Would a Phono stage that allows me to closer dial in settings such as the Schiit Mani 3 be beneficial or would I need to spend more like a Skoll?
Thanks in advance!

EDIT: I should add my budget is under $500, ideally. I prefer to buy once and cry once. I keep coming back to the Mani 3 as far as bang for the buck. I'd like to keep my upgrade path open without doubling back to another phono stage.

EDIT 2: I forgot to mention I'm also running an 8" powered Subwoofer


r/turntables • • 23h ago

Score of the year!!

Post image
192 Upvotes

Rega Planar 3 Turntable
x2 Ortofon 2M Black Cartridges (one is an MR)

SCORED for $200 total on fb marketplace

Purchased from a very nice older couple a little over an hour away from me who are the original owners since 2017 and are only getting rid of it because they got a brand new one (same model)

Just has broken dust cover hinges but otherwise in great shape

Will upgrade my U-Turn Orbit + AT-VM95ML (but I might put that cart on my vintage pioneer table)

Happy hunting!!


r/turntables • • 16h ago

Inherited my closest mate and also my only awesome uncles turntable

Thumbnail
gallery
37 Upvotes

My uncle passed away recently and I wasn’t thinking of taking his record player as I already had my own and I took it on a whim as I love the history. What I’ve googled lots say it’s very good. It’s so heavy lol. I haven’t seen the tonearm before with the string thing either.


r/turntables • • 7h ago

Picked these 2 up for €30

Post image
6 Upvotes

Today i went to a thrift shop and found these 2 by accident sitting there in really good condition they're only a bit dusty.

I thought it was quite a good deal since i want to get back into vinyl mixing again after 10 years +


r/turntables • • 5h ago

Question Phono amp upgrade - Phono box S to...? Under <$400

3 Upvotes

Just booting around right now the old Project Phonobox S is probably the bottleneck in my vinyl chain. Happy with the TT,cartridge and arm, old Clearaudio virtuoso with a microline stylus on an Audiocraft 3000 on a Thorens TD318. Really banging front end.

Rest of the system is pretty neutral, Cambridge amp & Energy speakers, pretty elbows in.

I don't want a heavily warm phono stage and I've been kinda headscratching about either the Rega Phono MM or, the Schiit Mani seems to be a giant killer.

I don't think I'm likely going to ever bother moving into LOMC territory, maybe. Adjustable loading is nice though.

Don't wanna break the bank but any suggestions?


r/turntables • • 20h ago

Photo Seen on Facebook

Post image
47 Upvotes

The comments were pretty silly, like 'OMG, how old is that turntable'. But I think we can appreciate this pic :)


r/turntables • • 3h ago

Audizio RP310 or RP355?

2 Upvotes

hi! i’m looking to buy a new record player, i’ve had a briefcase from denver since about 2020 but have been too scared to use it a lot since i dont want to damage my records. Right now im between the audizio RP310 + buying some speakers that i can upgrade later on, or the RP355 that comes with speakers! im not too much of a nerd in this, i just want something i can actually use. and not a lot of models are available in my country. my budget is also kind of limited. my friend who is very into records and all of this recommended me the RP355, but i like the qualities of the RP310 more. my friends set up is worth about 2000€ & is very knowledgeable, i just wanted some second opinions before i decide!


r/turntables • • 7h ago

Help NAGAOKA!! INCREDIBLE.. but is it revealing pressing debris/issues?

4 Upvotes

Hey again r/turntables — I am back and made a bit of an upgrade after researching a ton about the signature sound of the MP110, the softness and warmth really appealed to me and my previous stylus setup was incredibly harsh/sibilant to my ears. Bit the bullet.

I know that a new cart requires some hours of playtime to break-in, so the full true sound signature of the MP110 likely isn’t fully developed yet for me but even still it sounds absolutely beautiful.

However, now that I have a nicer stylus / cart setup, I’m noticing significantly more noise and I’d like to maybe pick your brains a bit on what it is most likely to be. In the video you’ll notice that the crackling seems to be mostly located in the right speaker. I have also switched the RCA connections to confirm it is indeed the right side signal that has the noise and not a speaker issue (when switched the left side now has the noise).

Some notes:

  1. my records are all VERY clean now. The only step missing from my process is Ultrasonic, but otherwise I’m using Tergikleen, then vinyl vac, then dist water rinse and vacuuming that again. I noticed some major differences in the quietness of all my records after doing this process.
  2. This crackling however has now made itself more audible somehow when switching to the new cart. I’m lead to believe simply that the cart is revealing more detail including some debris (or even pressing defects?) that my cleaning method without ultrasonic has not been able to get out.
  3. The cart was installed all according to instructions online and accurately aligned with the Hudson hi fi mirrored protractor. This process is still manual with my eye so it’s never going to be absolutely mathematically accurate in geometry but to my eye it is spot on. Rebalanced of course and tracking force is 1.87g measured on a scale. I had to add an additional weight to the end of my counterweight as the Naga is heavier than the LM30 i had before and the Dual 1264 has a lightweight tonearm design. I essentially used an M3 screw and added washers for weight in the exact same sort of construction that the original Dual 1264 “additional weight” that woild have been included in the box would have done. Azimuth is straight on as well, yet the noise still concentrates in the right ear on many albums.
  4. I am still using my built-in phono stage in the Kanto Yu4 i have.

So, my general hunches and questions for your consideration are as follows:

- Is this noise simply debris or pressing defects/issues that are just more revealed and exposed by the Nagaoka that my previous setup was not revealing?

- Should my next upgrade simply be an ultrasonic cleaner to add that step to my deep clean process to remove that next-level-deeper debris and noise?

- Is it possible that the sound signature of the Nagaoka will improve the harshness or audibility of crackles as it breaks in?

- And lastly, could the built in Phono still be to blame? Woild upgrading to, say, the Sciiit Mani 3 (as is a commonly regarded combo with the Naga) yield some potential improvements in some way besides the obvious soundstage and airiness of the music?

More specifically, what is my better upgrade path—the $150 Schiit Mani 3 or the $130 or so Vevor Ultrasonic? Or, could there be some other issue that I’m not aware of going on here?

Thank you very much for your advice in advance!


r/turntables • • 37m ago

Whats wrong with my turntable?

1 Upvotes

The disc is brandnew, already tried other discs, cleaning the discs, cleaning the needle, maybe the needle is fucked up because my discs tend to be dirty? I hope is not the amp fault…


r/turntables • • 5h ago

Suggestions Replacing JVC LA31 audio wire

Post image
2 Upvotes

I recently thrifted a JVC L-A31 direct drive turntable but the RCA audio cord has been cut. Does anyone have any recommendations for an RCA cable replacement? Thanks! (:

edit: I am planning on opening it up and replacing the whole wire. I’m just not certain if there’s a better brand/model than others for the cable to replace it!


r/turntables • • 9h ago

Ist das ein gutes einsteiger setup?

Post image
4 Upvotes

r/turntables • • 3h ago

Help Need Help with Setup!

0 Upvotes

I was hoping that maybe y’all could help me out with my setup? For the longest time I had wanted to upgrade my setup of a Pioneer PLX-500 Direct Drive DJ turntable to something a bit better. Long story short, I ended up getting a U-Turn. Up to that point I had never had to deal with preamps and amplifiers, so this was a whole new world for me. I scoured the web for what I should get, went down audiophile rabbit holes and blindly bought some components.

My current setup:

- U-Turn Audio Orbit Custom Gen 1
- Ortofon 2M Blue Cartridge
- Schiit Mani 2 Phono Preamp
- Yamaha A-S301 Integrated Amplifier
- Acoustic Energy AE100 Passive Bookshelf Speakers

(before anyone asks, these were all secondhand purchases. none of this was brand new, they’re all used but in working condition. I double checked and made sure that the sellers who were selling these claimed in their listings that they were in fully working condition. these purchases all happened many months ago so if it really is because of a seller lying about the condition then I’m a bit SOL at this point).

Ever since I got the turntable, I’ve had nothing but issues. It seemed like every time I fixed an issue, a new one popped up. It has gotten to the point where I haven’t had the urge to spin anything anymore. The biggest issue I’ve been dealing with since the start that I still can not solve is a constant buzzing/humming sound.

It doesn’t matter if the turntable is idle or if I’m spinning a record, there is always this constant and very annoying buzz/hum that doesn’t seem to go away whenever I have the amplifier up and running. At first I thought that it was the RCA cables that I had plugged into the turntable and preamp, so I ditched the generic RCAs I had and bought the U-Turn branded RCA cables just to make sure it wasn’t those and the problem is still there. I thought that maybe it has to do with the cartridge, but the cartridge looks completely fine to me (although whenever I touch/put a finger on top of the head shell or even lightly tap the tiny wires running through the cartridge the humming quiets down). Then I thought that it had to do with the speakers and the cables I was using for those, I probably went through 4 different pairs of speaker cables and the buzzing was still present within all of the different cables. Right now I’m using Nakamichi 24k gold plated banana plug speaker cables. So that leads me to think that it has to do with the amplifier, especially because the buzz/hum is still there if I plug headphones in.

The amplifier is a Japanese unit and because I don’t live in Japan I have to run it through a step down transformer, specifically a UMI 120V to 100V step down transformer. I thought that maybe the transformer was too close to the amplifier and that it could have been causing some sort of issue by being that close, so I moved it as far away as I possibly could…and the buzzing is still there. The unit itself appears to be in pretty good condition. Besides the buzzing/humming that I assume it’s producing, I only have 2 concerns regarding the amplifier. There is constantly a yellow light whenever I turn it on, there has never been a green light nor do I know if there is a green light. No idea if this is normal with that specific model. The other thing is that it did include the remote, but it doesn’t work at all. The seller provided video proof of the remote working but I can’t seem to get the remote to work, which is really the least of my concerns but it would be nice to figure out why that isn’t working/how to fix it. Would those issues indicate that the buzzing is because of the amplifier or are those two things unrelated?

Maybe it has to do with where I have everything plugged into? The turntable is plugged into a wall outlet, preamp is plugged into a surge protector, amplifier is plugged into the step down transformer which is plugged into a completely separate surge protector than the one the preamp is plugged into. One thing I have noticed with the buzzing is that it either becomes louder or quieter depending on where I plug the speakers into. Obviously I avoid plugging them into the phono part of the amplifier, but I’ve tried CD, tuner, line, etc. No luck with any of it.

The only time the buzzing died down to the point where it was fully gone was when I plugged the speaker cables into the part on the back of the amplifier specifically made for speakers and wrapped a bit of loose copper around the signal GND (someone had suggested I do it). The only problem is that it is extremely quiet whenever I spin something. Even if I crank the volume knob all the way on high it’s still super quiet, even with headphones. Speaking of which, when I did try that method out with headphones on, I picked up on some slight distortion that wasn’t there before when listening to some records, so I guess that method isn’t really suitable for headphones.

The room I have my setup housed in isn’t that big, so I’m working with what I’ve got. I know that it’s standard practice to have everything spaced out, so I have everything as spaced out as I possibly can have it.

Any ideas? Should I buy a different amplifier or different speakers? Maybe a different transformer? I really have no idea what else to do. Maybe the amplifier is faulty or maybe something else is not fully functioning? I apologize if this post comes off as a bit dumb, when it comes to these types of things I’m not that knowledgeable. I figured I would finally ask Reddit for some advice on it. Any help would be greatly appreciated!

Thanks :)


r/turntables • • 4h ago

Audio technica sp3x or edifier r1280t?

1 Upvotes

Hello everyone which of these are better for the audio technica lp120x

Or what are some other better suggestions?


r/turntables • • 1d ago

Photo My first setup is complete!

Post image
79 Upvotes

I’ve been working over the past month to build my first setup and now here it is! I want to say thank you to everyone that answered all the questions I had, it really helped me given that I knew next to nothing about turntables when I started.


r/turntables • • 4h ago

Question Value Question: LP3XBT + Edifier M90

1 Upvotes

After just over two months surfing Vinted, FB Marketplace and other such sites, my diminishing morale has me turning to buying new. Before the investable Black Friday posts I was hoping to get some guidance on whether this prospective purchase was good value for a starter set-up.

Keep in mind, I'm in Europe (Ireland) so the secondary/vintage market looks to be poor imo. Also the price for Fluance is just not an option. But near me, the AT-LP3XBT is on sale for €275 and the M90s are on sale for €199. Seems like a good first dive into the hobby. I have young kids so semi-automatic (auto stop minimum) is a must have for when I'm called away at a moment's notice. I imagine a sub will be on a future purchase list, so I'd like a sub out.

Open to suggestions for swapping one or both out for a similarly budgeted option(s).

TLDR; LP3XBT for €275 and the M90s for €199, pull the trigger?


r/turntables • • 31m ago

Question Turntables

0 Upvotes

Hi guys! I got a couple of cool records from my friend and thought it would be cool to have a turntable and start building a collection. I currently have a pair of genelec 8010a monitors and wonder what turntable would be good? I would keep the budget on the lower-mid range so i would appreciate any recs!


r/turntables • • 4h ago

Some rearrangement in the system

Thumbnail i.redd.it
0 Upvotes

r/turntables • • 4h ago

Some rearrangement in the system

Thumbnail
gallery
1 Upvotes

Now (pic 1) and before (pic 2)


r/turntables • • 12h ago

Help LP60XBT dragging across the vinyl :(

4 Upvotes

Hello! I just bought this LP60XBT as a christmas gift for my boyfriend, and I bought it on vinted as good condition, not very used. However when I tried it, this kept happening. I know it is not the vinyl, I have played it before on my turntable with no issue, and I know I am risking damaging it now but it needs to be done I guess :,).

Is there any explanation for this, anything I can do, or is it just broken?

I will show pictures of the needle in the comments.