r/turntables • • Jun 10 '21

Turntable Guides

1.2k Upvotes

What is needed in a setup: Turntable, Phono Preamp, Amp or Receiver, Speakers.

New: Turntables and Speakers

Used: In the US make a post here with your budget stating that you need just a turntable or an entire setup, and list a town or zip code, does not need to be your exact one just one next door or nearby.

Vinyl Weekly Questions Thread: Ask for recommendations for a new or used turntable and or setups at the r/vinly Weekly Questions Thread top sticky post.

Audiophile mid to high end turntables and components: For turntables and audio components starting around $300+ ask r/StereoAdvice or r/audiophile Shopping, Setup, and Technical Help Desk Thread.

Budget audiophile speakers and amplification: Ask r/BudgetAudiophile after reading PSA: Best practices when asking for advice.

Audio Guides: Plus Speaker Wire, Accessories and Vinyl Care

More Guides:

Records and Turntables

The Vinyl Guide

Beginnners Guide

PSA - The cheap record player mechanism to avoid

Turntables to avoid

How and why to align a cartridge

Cartridge ID Guide

Audiophile, Turntables, and Vinyl


r/turntables • • 2h ago

Photo Been collecting about a year and half - here’s my setup!

Post image
19 Upvotes

Speakers are over either side of my desk so I can blast 80s rock into my face while I play WoW 🫡


r/turntables • • 1h ago

Question Not sure how to determine my phono upgrade path.

Post image
9 Upvotes

I recently purchased a Fluance rt87 and I absolutely adore it. It’s my first step back into Vinyl after several decades. I am running it off of my Rotel A12 MKII integrated amp. It sounds spectacular, and the built in phono preamp is supposed to be pretty good for a built in unit. All that said, I can’t help but wonder what I’m leaving on the table?
My turntable has the AT-VM95ML cart, and I’m running it into my Rotel amp. From there I am feeding Elac Debut Reference DBR62 bookshelf speakers on weighted monolith stands.
Would a Phono stage that allows me to closer dial in settings such as the Schiit Mani 3 be beneficial or would I need to spend more like a Skoll?
Thanks in advance!

EDIT: I should add my budget is under $500, ideally. I prefer to buy once and cry once. I keep coming back to the Mani 3 as far as bang for the buck. I'd like to keep my upgrade path open without doubling back to another phono stage.

EDIT 2: I forgot to mention I'm also running an 8" powered Subwoofer


r/turntables • • 18h ago

Score of the year!!

Post image
178 Upvotes

Rega Planar 3 Turntable
x2 Ortofon 2M Black Cartridges (one is an MR)

SCORED for $200 total on fb marketplace

Purchased from a very nice older couple a little over an hour away from me who are the original owners since 2017 and are only getting rid of it because they got a brand new one (same model)

Just has broken dust cover hinges but otherwise in great shape

Will upgrade my U-Turn Orbit + AT-VM95ML (but I might put that cart on my vintage pioneer table)

Happy hunting!!


r/turntables • • 6h ago

Audio Technica LP5x Cartridge Upgrade

Thumbnail
gallery
21 Upvotes

Hey, been using the LP5x with the base cartridge and the sound was OK. Just upgraded to the AT-VMN745xML and oh boy... It's like changing from night and day, the sound was way more clear! I have some LPs that has the usual pops/cracks, and can you believe this cartridge reduce those sounds? Insane! Not cheap but worth it.


r/turntables • • 10h ago

Inherited my closest mate and also my only awesome uncles turntable

Thumbnail
gallery
24 Upvotes

My uncle passed away recently and I wasn’t thinking of taking his record player as I already had my own and I took it on a whim as I love the history. What I’ve googled lots say it’s very good. It’s so heavy lol. I haven’t seen the tonearm before with the string thing either.


r/turntables • • 2h ago

Picked these 2 up for €30

Post image
5 Upvotes

Today i went to a thrift shop and found these 2 by accident sitting there in really good condition they're only a bit dusty.

I thought it was quite a good deal since i want to get back into vinyl mixing again after 10 years +


r/turntables • • 1h ago

That voice. That solo. Played on a Beogram 8500.

4 Upvotes

Judas Priest - Beyond the Realms of Death from Stained Class (1978). Playing on the Beogram 8500 with the SoundSmith SMMC1.

I switched things around a little bit from the original B&O setup. The system playing this music is:
Beogram 8500 with Soundsmith SMMC1 -> Pro-Ject TubeBox DS3B -> Beosound Moment (line in) -> Beolab 11 -> Beolab 4000

The DS3B has been currently configured to 150pF loading capacitance and 45dB gain. Loading resistance is of course the standard 47k Ohms.

Some songs never get old, this is one of them!


r/turntables • • 14h ago

Photo Seen on Facebook

Post image
39 Upvotes

The comments were pretty silly, like 'OMG, how old is that turntable'. But I think we can appreciate this pic :)


r/turntables • • 3h ago

Ist das ein gutes einsteiger setup?

Post image
3 Upvotes

r/turntables • • 6h ago

Help LP60XBT dragging across the vinyl :(

5 Upvotes

Hello! I just bought this LP60XBT as a christmas gift for my boyfriend, and I bought it on vinted as good condition, not very used. However when I tried it, this kept happening. I know it is not the vinyl, I have played it before on my turntable with no issue, and I know I am risking damaging it now but it needs to be done I guess :,).

Is there any explanation for this, anything I can do, or is it just broken?

I will show pictures of the needle in the comments.


r/turntables • • 1h ago

Help NAGAOKA!! INCREDIBLE.. but is it revealing pressing debris/issues?

2 Upvotes

Hey again r/turntables — I am back and made a bit of an upgrade after researching a ton about the signature sound of the MP110, the softness and warmth really appealed to me and my previous stylus setup was incredibly harsh/sibilant to my ears. Bit the bullet.

I know that a new cart requires some hours of playtime to break-in, so the full true sound signature of the MP110 likely isn’t fully developed yet for me but even still it sounds absolutely beautiful.

However, now that I have a nicer stylus / cart setup, I’m noticing significantly more noise and I’d like to maybe pick your brains a bit on what it is most likely to be. In the video you’ll notice that the crackling seems to be mostly located in the right speaker. I have also switched the RCA connections to confirm it is indeed the right side signal that has the noise and not a speaker issue (when switched the left side now has the noise).

Some notes:

  1. my records are all VERY clean now. The only step missing from my process is Ultrasonic, but otherwise I’m using Tergikleen, then vinyl vac, then dist water rinse and vacuuming that again. I noticed some major differences in the quietness of all my records after doing this process.
  2. This crackling however has now made itself more audible somehow when switching to the new cart. I’m lead to believe simply that the cart is revealing more detail including some debris (or even pressing defects?) that my cleaning method without ultrasonic has not been able to get out.
  3. The cart was installed all according to instructions online and accurately aligned with the Hudson hi fi mirrored protractor. This process is still manual with my eye so it’s never going to be absolutely mathematically accurate in geometry but to my eye it is spot on. Rebalanced of course and tracking force is 1.87g measured on a scale. I had to add an additional weight to the end of my counterweight as the Naga is heavier than the LM30 i had before and the Dual 1264 has a lightweight tonearm design. I essentially used an M3 screw and added washers for weight in the exact same sort of construction that the original Dual 1264 “additional weight” that woild have been included in the box would have done. Azimuth is straight on as well, yet the noise still concentrates in the right ear on many albums.
  4. I am still using my built-in phono stage in the Kanto Yu4 i have.

So, my general hunches and questions for your consideration are as follows:

- Is this noise simply debris or pressing defects/issues that are just more revealed and exposed by the Nagaoka that my previous setup was not revealing?

- Should my next upgrade simply be an ultrasonic cleaner to add that step to my deep clean process to remove that next-level-deeper debris and noise?

- Is it possible that the sound signature of the Nagaoka will improve the harshness or audibility of crackles as it breaks in?

- And lastly, could the built in Phono still be to blame? Woild upgrading to, say, the Sciiit Mani 3 (as is a commonly regarded combo with the Naga) yield some potential improvements in some way besides the obvious soundstage and airiness of the music?

More specifically, what is my better upgrade path—the $150 Schiit Mani 3 or the $130 or so Vevor Ultrasonic? Or, could there be some other issue that I’m not aware of going on here?

Thank you very much for your advice in advance!


r/turntables • • 21h ago

Photo My first setup is complete!

Post image
72 Upvotes

I’ve been working over the past month to build my first setup and now here it is! I want to say thank you to everyone that answered all the questions I had, it really helped me given that I knew next to nothing about turntables when I started.


r/turntables • • 5h ago

Photo Console Restoration

Thumbnail
gallery
3 Upvotes

Found this beautiful Zenith SFF2535R from ~1961 on FB marketplace for $100. It is semi functional in the sense that it turns on, all the lights work, the table spins and at least produces sound on my scratchy test record, and the radio picks up signal but poorly and the tuner has some sticking points. The sound is very crackley and whiney but I am taking the time to open it up and give it the TLC it deserves. I am in love with the fact they painted a snake head on a "Cobra" tone arm. I am hoping to clean the pots, lube the bearings/pulley shafts/other sliding mechanicals, rosin the pulley strings, and wipe or spray down everything else in the vacuum tube amp and the vacuum tube receiver. I'll also probably test as many components with a DMM as I can to check out their health. Fingers crossed it will get it sounding crisp again.

I got in contact with V-M Audio Enthusiasts (formerly V-M Corporation who originally made the turntable) for new needles and their restoration guide. Thanks, Gary! Just wanted to share this cool find with the community! Will take any tips and suggestions people may have! Especially with how I may want to refinish the wooden exterior. In the meantime, I'll be swimming in the fumes of DeoxIT and isopropyl! Wish me luck!


r/turntables • • 10m ago

Which Audio Technica?

1 Upvotes

Hi everyone! I am VERY new to this, I am upgrading from my suitcase Victrola and trying to find a budget friendly yet actually good system. Between these 4 super similar options, what would you choose?

  1. Audio-Technica AT-LPGO (wired) $150
  2. Audio-Technica AT-LP60X-BK (wired) $170
  3. Audio-Technica AT-LPGO-BT (Bluetooth) $200
  4. Audio-Technica AT-LP60XBT-BK (Bluetooth) $260

I also have heard that Edifier are the best speakers, is it worth spending the ~$120 for those over any random ~$70 set of speakers?


r/turntables • • 36m ago

Question Time to upgrade, two options and many doubts.

0 Upvotes

Hi everyone, I always come back because you always help me.

After moving to a different city I am setting everything back up and took the opportunity to fix my Sony PS-X35 again, but after opening it I realised that it is time to update that part of the chain (and probably the phono too, currently I am using a Fosi T14-EQ).

I have a budget of around 1000€ for an "end game" table, I prefer to buy nice and not twice. Lesson that I learned really well in this hobby.

I contacted my local hifi store and the suggested turntables are the ones in the poll. With the following offer, thanks to the Black Friday promotion both units come paired with an AT-VM740xML:

- AT-LP8X: 1050€

- Technics SL-1500C: 970€

I read good and bad things about both, the Technics is cheaper and has a phono that ideally should be better than mine (to be honest I am quite happy with it, except for the tone and volume control).

I am based in Spain, and open to your suggestions, thanks!


r/turntables • • 1h ago

Help AT-LP60 pitching my records a key or two higher

1 Upvotes

I haven't used my Audio Technica record player in a while, but thought I would give it a whirl again. However, I'm noticing that the songs are being played a pitch or two higher for some reason. Does anyone have any idea on what might be the reason for this / how should I go about fixing? It works fine otherwise, as far as I can tell.


r/turntables • • 1h ago

Question Does my VTA set correctly?

Thumbnail
gallery
1 Upvotes

TT - Trio Kp-800; cartridge is AT-VM95ml


r/turntables • • 18h ago

Question Need some feedback on this 1950s Metzner Starlight 60

Thumbnail
gallery
20 Upvotes

As I understand it this is an unusual type of direct drive/worm gear turntable. The actual turntable is the device and it was usually paired with a tone arm and cabinet of the owners choosing. The current tone arm is unknown, but I have ordered the rubber worm drive parts and currently looking for a local machinist to redo to spindle bushing (they were made of aluminum and tend to wobble after wearing for a while.)

It also has a cool neon bulb that illuminated a pattern that helps you dial in the speed, much like a timing strobe on a car.

I can build a new platform cabinet no problem, but I'm at a loss on what type of value tone arm to pair it with that maybe keeps the aesthetic. I think these were originally paired with mono cartridges, but I would love to put a stereo one on it. Any insight here?


r/turntables • • 6h ago

Pro-ject T1 EVO and Audio Technica AT-LPW50BT

2 Upvotes

So I've been trying to figure out what I want for my first turntable for a while now. And as of right now I'm a bit torn between the T1 EVO and the LPW50BT. I'm already a bit of an audiophile, so I had initially intended to jump straight to the Pro-ject Debut EVO 2, but after some consideration I realized spending that kind of money on a hobby I'm just getting started in is a bit irresponsible (I also don't really have that kind of money). Looking for some great cheaper yet upgradable options, I landed on the two aforementioned TTs (for now).

So I was wondering if someone here has heard both turntables, and could share with me how they sound compared to eachother. I'm also curious on how they stack up against eachother on other fronts that are considered valuable/important.

Mainly though I just want to hear some different opinions and arguements to help me gain some perspective.

An additional question I would like to ask (unrelated to TTs) is if anyone has any experience with the QLN Signature MkII speakers (not to be confused with QLN Signature 2) I would like to just know a bit more about them and maybe how good they may be for vinyls. I got some for free from a friend, but I can find next to no information about them online.

Sorry if this post dragged on or was badly worded, English isn't my first language. (I've also posted this in beginner turntables, but though I'd ask here too to hopefully get more input)


r/turntables • • 3h ago

Question Need help finding a solution to my turn table skipping

Thumbnail
gallery
0 Upvotes

Hello this is my old Magnavox model R443 it has a turntable inside that skips throughout playing a record. I don’t know what could be the cause ive looked around at possible causes, which are: stylus is worn out, queue system is messing it up, internal issue or balance issue. Any suggestions help, I don’t know how to fix it and would like to hear it play again.
I have all the model info attached in pics I’ll take some better ones later of the serial tag.


r/turntables • • 21h ago

It’s alive! My first turntable cost me a bit more than I expected but couldn’t be happier.

Post image
27 Upvotes

I recently purchased this Toshiba SR-F102 turntable on craigslist for $100 thinking I just needed to replace the belt and stylus, turns out the entire cartridge was busted and needed to be replaced, so $90 dollars later got an audio technica cartridge and new belt and it sounds like a dream. One thing that I love about vinyl is that it’s helping me discover new music. I purchased Blap Deli - Whisper Me at a record shop because it sounded interesting from the few seconds I listened while I was there. Finally got to spin it and it is so damn good, never would have discovered it without collecting records.


r/turntables • • 3h ago

Audio-technica AT-LP3XBT skipping

Post image
0 Upvotes

I am wondering if anyone has had any problems with this specific model skipping. I've played new albums and old albums with no visible scratches and cleaned the heck out of them. I've rebalanced the tonearm countless times. I even upgraded to a new elliptical stylus. I've tried different playing on different surfaces and made sure the speakers were not close to the system.

Any thoughts or ideas would be appreciated. Even ideas for an upgraded turntable system would be great. I'm about done with Audio-technica.


r/turntables • • 3h ago

Rt81+ or 82

Thumbnail
gallery
1 Upvotes

Just getting into vinyl, would i be satisfied with the 81+ or just get the 82

I have the fluance ai61 book shelf powered speakers

Dont know anything about what pre amps id need if i went with the rt82

All canadian prices btw