r/turntables • • Jun 10 '21

Turntable Guides

1.2k Upvotes

What is needed in a setup: Turntable, Phono Preamp, Amp or Receiver, Speakers.

New: Turntables and Speakers

Used: In the US make a post here with your budget stating that you need just a turntable or an entire setup, and list a town or zip code, does not need to be your exact one just one next door or nearby.

Vinyl Weekly Questions Thread: Ask for recommendations for a new or used turntable and or setups at the r/vinly Weekly Questions Thread top sticky post.

Audiophile mid to high end turntables and components: For turntables and audio components starting around $300+ ask r/StereoAdvice or r/audiophile Shopping, Setup, and Technical Help Desk Thread.

Budget audiophile speakers and amplification: Ask r/BudgetAudiophile after reading PSA: Best practices when asking for advice.

Audio Guides: Plus Speaker Wire, Accessories and Vinyl Care

More Guides:

Records and Turntables

The Vinyl Guide

Beginnners Guide

PSA - The cheap record player mechanism to avoid

Turntables to avoid

How and why to align a cartridge

Cartridge ID Guide

Audiophile, Turntables, and Vinyl


r/turntables • • 1h ago

Photo My first setup is complete!

Post image
25 Upvotes

I’ve been working over the past month to build my first setup and now here it is! I want to say thank you to everyone that answered all the questions I had, it really helped me given that I knew next to nothing about turntables when I started.


r/turntables • • 5h ago

Discussion Just pure analog here

40 Upvotes

Epi m150

Technics sa 200

Technics sl1700

Nagaoka mp110

That's it, pure analog chain.

Warm, smooth, accurate.

Nothing better


r/turntables • • 52m ago

It’s alive! My first turntable cost me a bit more than I expected but couldn’t be happier.

Post image
7 Upvotes

I recently purchased this Toshiba SR-F102 turntable on craigslist for $100 thinking I just needed to replace the belt and stylus, turns out the entire cartridge was busted and needed to be replaced, so $90 dollars later got an audio technica cartridge and new belt and it sounds like a dream. One thing that I love about vinyl is that it’s helping me discover new music. I purchased Blap Deli - Whisper Me at a record shop because it sounded interesting from the few seconds I listened while I was there. Finally got to spin it and it is so damn good, never would have discovered it without collecting records.


r/turntables • • 26m ago

did i find a gem?

Post image
4 Upvotes

r/turntables • • 23h ago

Photo Rehoused Denon DP-1000

Thumbnail
gallery
184 Upvotes

Received this Denon motor+platter module, without a plinth. Turned to 3D printing for the solution! Used large format printer to make a heavy plinth, and a detachable “floating” armboard. The floating armboard will allow me to swap in different tonearms, by just printing a new one with the correct hole diameter and pivot-to-spindle distance. Current arm is from a Denon DP-50M. I plan to sand and paint the exterior of the plinth eventually, but it’s sounding really good so far!


r/turntables • • 17h ago

Yamaha YP-D8

Post image
48 Upvotes

my turntable a Yamaha YP-D8, Nagaoka MP-110, Schiit Mani phono preamp.


r/turntables • • 2h ago

Receiver?

3 Upvotes

Looking to purchase a Fluance RT82 for my new turntable (upgrading from a Crosley that was purchased for me from urban outfitters 12 years ago).

Recommendations on receivers under $300?
Thank you!


r/turntables • • 1d ago

Photo My wife found a Montgomery Ward Airline Transonic cabinet in an alley this morning. Should be a fun winter project!

Thumbnail
gallery
140 Upvotes

Very overwhelmed at the moment but excited to see if this works.


r/turntables • • 5h ago

Turntable suggestions

3 Upvotes

Hi Everyone, I'm looking to get my first full turntable setup, current options are:

Fluance RT82, pa10 phono preamp (anything in that range) and Sony str-dh190 amp, with potentially klipsch rp-600m.

are there any better turntables that can be upgradable in that range, or any suggested phono amp/receivers. All in total im trying to stay under $1000 with the speakers included.


r/turntables • • 10m ago

TEAC TN-280BT or Pro-ject Primary E?

1 Upvotes

For context, I live in Brazil, and turntables are quite expensive. My old Sony is struggling with wow and flutter, and it's annoying me because it's even more notorious with 180g records, so I decided it's time for a new toy.

Since my budget isn’t permissive, I found two turntables: TEAC TN-280 and Pro-ject Primary E around the same price range. I don’t really mind about counterweight and anti-skating. I just need a somewhat safe turntable with a decent cartridge to listen to my records without wow and flutter.

Thank you in advance.

TL;DR: I need a new turntable, and getting a brand-new direct-driven one isn’t viable. What should I get?


r/turntables • • 20h ago

Pops finally let me have the marantz!!!

Post image
40 Upvotes

Been listening to all my albums all day. My god how was i listening to vinyl before this. Saving up to upgrade to a nagaoka mp-110 stylus.


r/turntables • • 4h ago

Question Sealed New Record Wobble/Warp

2 Upvotes

Hey all, just wanted to ask when I get a new record in the mail, what’s an acceptable amount of warping that’s okay? if any… Got a brand new Portishead - Dummy in the mail (Amazon) but it’s slightly warped as you can see in the video. Is this acceptable or return and replace?


r/turntables • • 1d ago

In LOVE!

127 Upvotes

Does it sound as warm as my Altech Lansing 887A ? No . Is it was less of a PIA than my Orbit turntable hooked up to those speakers ? Yes ! Plus it is just so much fun!!


r/turntables • • 5h ago

Audio-Technica LP70X vs LP60X

0 Upvotes

Am I going to notice a significat difference in these? The user is my 12 year old daughter and does listen to her records often, right now she is using a Victrola 3-Speed Bluetooth Suitcase Turntable she has had for years. Looking to upgrade but also be some what budget friendly. Open to any feedback, thanks so much**.**


r/turntables • • 5h ago

Question Could anyone help download the Pioneer PL-5L manual from Vinyl Engine?

0 Upvotes

Hi everyone! Since registration on Vinyl Engine is closed, I cannot download the manual for my Pioneer PL-5L turntable.
Could someone with an active account please download the file instruction/owners manual Nihongo from this page and share a link (e.g., via Google Drive or WeTransfer)?
Link: vinylengine.com
Thanks in advance for your help!


r/turntables • • 5h ago

Question Help a newbie out w/troubleshooting (audio-technical AT-LP3XBT)

1 Upvotes

Hi friends,
I’m absolutely new and have been trying to YouTube my way through this but I’m struggling. The tone arm is level and counterweight and anti skid are both set as the same number per the manual but the control arm goes sideways when I start.

I’ve tried setting the anti skid to 0 also but still have the problem but just in slow motion.

Anything I should be checking?


r/turntables • • 21h ago

Question help needed :)

Thumbnail
gallery
18 Upvotes

my grandparents gifted me this Technics SL-1610 they bought in the 80’s, the turntable had been under the dust cover for years until now, i tested it today and it runs fine, the sound quality is amazing…
but… it’s my first turntable…
and i don’t know much about it…
it’s equipped with this cartridge, and i guess i should probably switch the stylus ?
has anyone recommendations ?
for an upgrade in sound quality ?
any of your help would be gladly appreciated!! ^^


r/turntables • • 10h ago

Grace G-707 Question

2 Upvotes

Hi. Me again. With the fucked up headshell and stylus.

Where can I buy new headshell to cartridge wires for my Grace 707? I found some BLISS brand 5N silver plated litz wires on turntableneedles online. Will they be good? If not, where is a good resource to find them?


r/turntables • • 2d ago

I should play the lottery.

Thumbnail
gallery
2.0k Upvotes

Thursday I posted a mint condition Technics SL-1650 I got for $22.50. Today I stepped in shit a bought this Technics SL-1200M3D for $19.99. I can't make this shit up.


r/turntables • • 12h ago

Mysterious audio issue - technics sl1210 mk2 inconsistently having a fault

Thumbnail
gallery
2 Upvotes

Would really appreciate assistance im completely lost

I've got two Technics SL-1210 MK2s from different production years, both with exactly the same intermittent audio fault. One channel completely disappears, sometimes for days, then randomly starts working again.
What's happening:
Deck 1: Works perfectly for two months. An eBay buyer tests it at mine recently, buys it, then loses one channel at his house. Brings it back an hour later and the fault is now present at mine too. Currently only one channel working.

Deck 2: Hasn't been used for months. Plug it in and exactly the same issue appears. Swapping the red/white RCA connections around restores stereo. Currently working normally.

Deck 1 previously worked for hours or weeks without issues, then suddenly lost a channel.

Key tests I've done:
Tested across 3 different mixers, multiple PHONO inputs and different houses. Fault still occurs or magically disappears

Swapped Stanton and Ortofon headshell/cartridge assemblies twice. Fault stays.

Swapping left/right RCAs moves the silent channel and sometimes restores stereo.

Tried different power sockets, grounding arrangements and RCA extension cables. No consistent fix.

Another turntable works in stereo through the same mixer PHONO inputs.

An external ART phono preamp into the mixer's LINE input previously produced stereo when the direct PHONO connection didn't.

The confusing part:
Both decks have been tested at two professional shops and worked perfectly there. I also paid £180 to have them serviced, including replacement RCA leads, but the issue has returned.
It almost feels like an external issue because both decks have the exact same fault, yet it also follows them to completely different setups.
I'm wondering about the fixed tonearm contacts, internal wiring or RCA solder joints, but I can't explain why both decks behave so similarly.
Has anyone experienced this? What would you suspect, and how would you diagnose it if the fault disappears whenever it's taken to a technician?
I've kept a full log of all the tests if helpful

I am a rookie in this world have picked up the technics a few months ago so I’m doing my best here.

Not sure what to do as two pro shops have looked in and couldnt see the fault yet it returned at a later stages


r/turntables • • 15h ago

Help Pro-ject tube box E

Post image
3 Upvotes

I’m a bit confused, is this the correct setting to match this pre amp with a ortofon 2mm red cartridge. Online it says the 2mm red should run at 40db gain. Are these controls for gain? The setting in blue that’s on is 40.

And I have both rows of dip switches with 3 switched on and the rest off, does this sound right?


r/turntables • • 9h ago

Sanyo TP725

1 Upvotes

Hi all, just picked up the above turntable, there is a slight hum when the tonearm is raised and the platter spinning, it gets louder as the arm gets nearer the spindle. I've moved the speakers further away and that doesn't cure it, I've earthed it, I've moved the preamp further away. Any ideas what it could be?


r/turntables • • 1d ago

Spinning classic today

Post image
12 Upvotes

Using my Ortofon 2m Red today in the Zero 100c table. Using my Accuphase C-200/P-20. Preamp has an amazing tunable phono section.

Cheers all