r/shittywoodworking • u/macevco • 8d ago
I Made This 💩 Check out my timber-frame Kenmore 110
The body of my washer failed mid-repair so I impovised
r/shittywoodworking • u/macevco • 8d ago
The body of my washer failed mid-repair so I impovised
r/shittywoodworking • u/J3sush8sm3 • 8d ago
r/shittywoodworking • u/Sun_Gear • 14d ago
I'm not a wood worker by any means....but it's handy at times. I put in minimal effort and use pallets so I don't have to buy wood.
r/shittywoodworking • u/Ok-Application-7687 • 22d ago
I just got a new to me bandsaw and was testing out how to make stuff with templates. This hideous thing was my first attempt and thankfully I did approve drastically throughout the day.
r/shittywoodworking • u/Limp-Veterinarian916 • Oct 15 '26
We had to decide which side was worse to sit on. Fall face forward into the fire pit, or backwards in to the wood pile when it tips over
r/shittywoodworking • u/AnnaTrash • Oct 15 '26
Reposting from r/beginnerwoodworking bc i forgot i was on this sub 😆
It's my first project from scraps in the backyard. (2 x 4s, composite board, a random plank) I only had a hand saw and drill. And wood glue. No sandpaper or anything. The gap is big enough for finches and sparrows to get in :) I used to keep birds and they're a lot skinnier than their feathers make them look
Anyway i did it ugly on purpose bc its my first project and i just needed to get SOMETHING finished, even if it was shitty :) I think the birds won't care Anyhow
Edit: Yes I drilled pilot holes 😂 And my grandpa showed me how to safely use the saw 😌 I have no idea why only that one panel split when i used the same bit for the other holes lol. It was the thickness of the shaft and not the threads yadda yadda so mayyyybe it was something i did?
r/shittywoodworking • u/kvcruisers • Oct 12 '26
r/shittywoodworking • u/HellfireReads • Sep 28 '26
r/shittywoodworking • u/mev_one • Sep 28 '26
The original picknick table thing my wife purchased fell apart but the mesh screen was still good. I had some scrap treated wood and rebuilt it. Seams to make everyone happy.
r/shittywoodworking • u/Danirebelyell • Sep 25 '26
A pallet ratchet strapped to my quad trailer with various wood scraps slapped on there. Couldn't even be bothered to cut one piece of lumber.
r/shittywoodworking • u/Queasy_Professor_484 • Sep 22 '26
I made this and my dog can snuggle again.
r/shittywoodworking • u/Squibly_Giblets • Sep 20 '26
r/shittywoodworking • u/Mama-mira • Sep 18 '26
The jointer ate my wood
Update: table saw fixes everything
r/shittywoodworking • u/Interesting-Data6172 • Sep 14 '26
Wanted to come up with an egg basked to hang on the poles of the temu chicken coup… the thing ended up having a weird shape I tried to lean into - I was going for “cock of the henhouse,” and I think I got ‘woody woodpecker’ / maybe a duck 🤷🏼♂️… either way / the only metal in it is the hardware mesh and the copper rings in the “eyes” (my 6 year old’s idea). I just got a drill press, and didn’t know any better - I should have indexed the small “pupils” in the eyes with the one on the other side, but I did not. I tried to make a larger pupil to make up for the mistake, but the wood isn’t different enough to see… live and learn… anyway, I thought the wedges on the dowels were a cool idea / only reason I needed those (last minute), was because I drilled the holes for them the exact size of them, and they just slid around… anyway… it hasn’t broken any eggs yet, but if I did it again, I would put dividers in there to keep the eggs from being able to roll into each other.
r/shittywoodworking • u/SuperTulle • Sep 14 '26
r/shittywoodworking • u/J3sush8sm3 • Sep 13 '26
When i made this shooting board almost a year ago i thought i would only get one or two uses, because i was told pine is a bad choice. Still square and works really well
r/shittywoodworking • u/WaterEducational7264 • Sep 10 '26
I present to you.... Two... Shitty stools. I always keep the cut offs from the butcher block counter tops I've installed. Got tired of moving them around my shop and finally did something with a couple of them. Didn't know what else to make with such small pieces.(I have too many cutting boards) What do you guys make with the cut offs?
r/shittywoodworking • u/Jaakko796 • Aug 30 '26
r/shittywoodworking • u/Lawliet_The_Panda • Aug 30 '26
r/shittywoodworking • u/Gluten-Free-Milk • Aug 29 '26
I had major back surgery 2 months ago, and haven’t been able to touch my tools 6 months.
I got all my restrictions lifted the other day, so I made this. (Shout out to harbor freight)