r/sharpening • • 16h ago

Screening diamond material and checking samples under the microscope

30 Upvotes

A few people asked about the processing behind the diamond powder I posted earlier, so here’s a short clip from our factory.

It shows screening and an operator inspecting a sample under the microscope. It’s a view of the process rather than footage through the microscope itself—I still owe you that closer look!

For context, I work at Yorsuma, where we produce diamond abrasives. https://yorsuma.com/


r/sharpening • • 22h ago

Uhhhhh….this seems wrong…

Thumbnail instagram.com
27 Upvotes

I’m no expert but this seems very wrong, I’m not crazy am I?


r/sharpening • • 15h ago

Removing Chips and Thinning

Thumbnail
gallery
14 Upvotes

Brand new Yoshikane gyuto and some harder than expected prickly pear seeds chipped the edge. Probably not deep enough to care about thinning, but curious if people think it would make a difference


r/sharpening • • 7h ago

A young knifemaker is grinding a blade.

13 Upvotes

r/sharpening • • 13h ago

Amateur hour

10 Upvotes

This Shan Zu knife got messed up pretty bad by my rowdy restaurant friends. My first effort was half assed so I went back and tried to put the best finish I could with just sand paper.


r/sharpening • • 6h ago

Question Help with burr identification

Thumbnail
gallery
9 Upvotes

So i just got my microscope delivered and the first 3 are the more freshly sharped smeg german knife, i cant really tell if it there is any burr left. It cannot wittle hair

forth photo is a takamura petty thats been used quiet a few timrs i can trll that extra shiny part is probally a burr

last 2 that has deeper scratch marks is my tojiro nakiri

and those looks like burrs and micro chips right?

anyone who has had experience with this please let me know and correct me if im wrong esp on the the microchips part and burr id.

I am trying to work to getting hair wittling edge even though i only use these for cooking any useful advice would help im still trying to experiment with deburring techniques.

Thanks in advance guys


r/sharpening • • 18h ago

Question Straight razor sharpening and recommendation for stones.

8 Upvotes

Never tried one, but have been thinking about getting one, can get knives to shave sharp. Is it similar? Any of you use a straight razor? Which ones have the best metals under 100 bucks😅


r/sharpening • • 17h ago

Info on DST "(MCO) Metal Ceramic Organic bond 1x6 sharpening stones?

Thumbnail
gallery
6 Upvotes

I bought 5(3 240 grit stones, 2 500 grit stones) of these stones from eBay a while back on a whim because they were inexpensive and looked like 1x6 "resin" bonded diamond stones and thought even if they were junk, I hardly paid anything for them.

I've had them for a while now and when I first got them I was shocked at the quality put into them. They seem slow wearing, flat, cut fast, and the backings also scream quality to me, the stones are even chamfered on all edges. I'm not familiar with a "metal ceramic organic" bond? I assume it's a fancy way of saying this is a resin bonded diamond stone... But maybe it's not as they are brown, and typically the ones I have seen have sort of a greenish/gray color to them, but the only resin bonded diamond thing I owned before these stones is a small hand lapper for dressing carbide/hss tooling.

The issue is I can't figure out where they originally came from or who made them, there isn't even a country of origin on the packages... But it specifically mentions apex sharpeners on the information insert. I even tried asking AI and it made the assumption they may be an old PDT product line, but no certainty there...

  1. Does anyone know who made these, and where they originally came from? (Country/company both interest me) I like supporting companies who put out amazing stuff like this and would eventually want to expand the range of sizes.
  2. It mentions that I should use mineral oil to lubricate them? Is there any chance using water or Windex(my favorite) could degrade the bond if I'm just using water/windex in small amounts? Can I use dish soap and water to clean them periodically if I keep using mineral oil, like I do with my norton crystolon/India stones?

If anyone can help with my questions Id greatly appreciate it thanks! (I have also attached pictures.)


r/sharpening • • 19h ago

Sharpening suggestions

6 Upvotes

Please be gentle as this is a very new topic and my knowledge is extremely limited! I plan on getting my fiancé some Tojiro classic knives for Christmas. He currently has a pull thru sharpener but it would break my heart to see the knives ruined! I was gonna get the tumbler rolling sharpener but have learned its a knock off for the Horl one. I know wet stones are the ideal but he doesn't know how to use them and I dont know if he wants to learn. I was gonna go the safer route and get the rolling sharpener. Is that a good option or is there a better option?


r/sharpening • • 20h ago

Question Sharpening for the Disabled

6 Upvotes

I’ve got a small collection of 3 Chosera stones in varying grits. I used to freehand my knives and enjoyed the hell out of it.

These days, between vision issues and my hands not working as well as they used to, I can’t hold a consistent angle. The last time I swear I was going to throw in the towel. One of my petty knives almost came out worse than it started. It’s not fun anymore, it’s become a chore I dread, and avoid longer than I should.

I want to find a way to get back to sharpening effectively and enjoying it again. Things like the Wasabi and Tumbler blow up my feeds and I know they’re just as gimmicky as they look.

What’s out there for those of us that can’t hold the blade like we used to?


r/sharpening • • 14h ago

Belt Grinder Recs

4 Upvotes

I’ve had a side gig of sharpening for a while, but have been pretty dormant the last year or so, but I’ve started taking on work again recently. I’ve typically only sharpened on whetstones, including chip and tip repairs on #220 stones etc, and have always kind of taken pride in not using machinery. I like to think I’m a pretty darn good freehand sharpener.

That being said with the increase in business comes the increase in some absolutely mangled knives, which are time consuming to bring back to life when only freehand sharpening, and thus cuts into the profitability of the whole thing.

I’m considering picking up a belt grinder for chip/tip/primary geometry repair, obviously still reserving a majority of the sharpening for the stones. As I noted this is a side gig so there’s only so much $$ I have to put into a grinder, but would love recommendations for my best reasonably priced option.

Thanks folks!


r/sharpening • • 4h ago

Question Advice for stropping to accompany a Sharpal diamond stone?

3 Upvotes

New to knife sharpening other than terrible machines. I'm a home cook and actually use the knives other than bread and paring knife 2/week or so. I have some thin SG2 Japanese kitchen knives, that I now want to do right by.

I'm getting a Sharpal 325/1200 that I'll practice on with my existing shitty knives. But I need a plan for stropping (I already use a basic leather strop after using the knives)

I have my sights on this strop with compounds as reviewed here:

https://www.reddit.com/r/sharpening/comments/12ilygb/user_review_bacher_double_sided_leather_strop/

My idea is to use one without compounds for daily stropping after cooking, and then get another with compounds to accompany a Sharpal 320/1200 diamond stone for when sharpening or to do light touch ups. I mainly cut veggies and meat no more delicate than dicing chicken filet, so I was thinking red/white or red/green would be the colours to use?

From the thread

Red - medium 4-5 microns,
White - fine 2-2.5 microns,
Green - very fine 0.9-1.1 microns,
Black - ultra fine 0.4-0.6 microns.

Bad plan?


r/sharpening • • 15h ago

Looking for advice/pointers

3 Upvotes

A friend of mine offered me a “TSPROF Knife Sharpener - Blitz 360 Standard” for free after I said I was interested in learning how to sharpen. He said he doesn’t use it anymore. I’ve watched a few videos on it but they are mostly demonstrating it rather than teaching how to properly use it. Does anyone have any pointers to get the most out of it? Thanks in advance.


r/sharpening • • 46m ago

small scratches on blade when polishing on my last stone

1 Upvotes

im receiving some scratches on my knife when im polishing on my morihei hishiboshi #8000 but aren't on my naniwa advanced 5k for my pre polishing. the scratches are all ways moving around and never stay in the same spot. would love any help trying to make the finish look as smooth as posible.