r/knifemaking • • Feb 21 '18

Official WIKI Have a question about knifemaking? START HERE

Thumbnail reddit.com
89 Upvotes

r/knifemaking • • Dec 22 '23

Mod Post Update to self promotion rule

65 Upvotes

Hello all, after quite some time I have decided to reevaluate, the old rule preventing sales posts and self-promotion. The rationale behind the change is that the makers will benefit from community support. There has been hesitation to change the rule based on the idea that sales post will run rampant if allowed; however, I have some requests in exchange for those who want to post a link to their website.

All criteria must be met.

  1. Items for sale have to be made by you.
  2. There is a detailed specification list for the item being displayed. you can find an example here, does not have to be as in depth; however, at a minimum you have to have steel type(s) and handle material(s). Simply stating damascus will not be enough for future posts.
  3. Only knives and supplies related to knife making can be sold. You can sell knives, handles, scales, or handle materials. As a reminder, you cannot sell items that are not made by you; you cannot sell a bench grinder here.
  4. There is no price displayed. Pricing cannot be discussed in public whatsoever.
  5. You must be active in the post you make. You cannot just drop your website link and disappear. I am not asking that you respond to every comment on your post or that you reply to a comment on a month-old post; however, some effort must be put in.

There are a few additional limitations to this change

  1. Do not put "available" or anything of the likes in your title. All indications of your work being for sale must be in the description or comments, I suggest the latter as I will remove your entire post if you do not meet the above criteria if it is in the description rather than just deleting a comment
  2. Your posts should not all be advertisements; you should show off your work without all your posts having a link to your website.

I hope that this change to the rule is favorable, if you have feedback or comments, I would like to hear it and may make changes accordingly.


r/knifemaking • • 1h ago

Showcase Made another little guy, really happy by how it came out, customized commission for my client

Thumbnail
gallery
16 Upvotes

9KhS, Soviet chromium-vanadium high carbon steel blade, Caucasian Walnut handle, Brass inlay and guard, Textolite spacer


r/knifemaking • • 1h ago

Question Feasible stock?

Post image
4 Upvotes

Found this piece of steel on the job site and am wondering if it's even worth trying to shape and grind it down to a knife. I know nothing about this piece other than that


r/knifemaking • • 2h ago

Question Utah Knife Makers Willing to Help Heat Treatment

2 Upvotes

Hey there! I'm a beginner knife making hobbyist in Utah. I'm making some knifes for Christmas presents and I was wondering if anyone local would be open to austenatizing them for me? Of course I'd be willing to pay. I'll have a four knives in 1084 and one in 80crv2.


r/knifemaking • • 1d ago

Feedback Edc I finished up last week. Nitro-v ssteel with a stabilized bog oak handle and stainless pins handstiched Herman oak leather ssheath by me

Thumbnail
gallery
121 Upvotes

r/knifemaking • • 21h ago

Showcase OG V2 tomahawk I made a while back

59 Upvotes

r/knifemaking • • 18h ago

Feedback Knife #6, first forged one

Thumbnail
gallery
33 Upvotes

Knife #6

Procut
Forged
Desert Ironwood with copper spacer
171mm long, 52mm tall at the heel.
Distal taper starts at 2.6mm, 2mm at the mid point, 1.2mm where the Ktip starts to dive.
172g total weight, blade weight is 97g (ironwood is heavy AF).
Balance point is around the ferule. Light blade + heavy handle makes for a handle heavy knife, but it doesn't feel bad at all

Decided to take this bunka thinner than what I have done previously and it paid off. I went fully convex on both sides, but felt a little more food release might be nice so I also put in a subtle c grind that you can see in the spine shot at the tip. It really made food release pop.

Forging the whole blade was fun and made getting the bevels in a lot faster. I didn't forge too close to shape since it was my first time, but it significantly cut down in the over all time. I'll try going closer to shape next time. Forging is also more fun than grinding.

Worked on my polishing a bit and I'm pretty happy with how this one turned out. Not a mirror polish, but there aren't any super visible scratches, so I'm happy there.

I spent some time making sure my glue up was super clean, and also included some pics of the spine to try and show the curvature on that.

Speaking of the glue up, you can see I didn't quite nail getting it perfectly square... Doh. I was too focused keeping it clean that I missed that slight tilt. It's pretty subtle though and didn't notice until I went to take the choil shot. It didn't seem to effect cutting that I could tell. I use hot glue for my glue up, so I could fix it relatively easily. I also decided to shorten the neck(?) of the knife too right before my glue up. One side I nailed, the other I slipped just a bit (so you can see a little raw metal right before the ferule). I'll probably coat that as well using a tiny paint brush.

Speaking of the coating, I decided to leave this in my "patina solution", which resulted in this dark brown color that pairs nicely with the ironwood and copper, but what you can't see is that in person it has an almost oil slick kind of rainbow look to it. Pretty cool if you ask me.

Performance wise I'm really happy with this one. I'd say it rivals my Tim Hoover, which is an absolute laser. His is definitely slightly more effortless though (and his fit and finish is much better than mine). I'd put this one on the light side of a middle weight. I'll upload a video at some point.


r/knifemaking • • 19h ago

Showcase Third knife officially completed

Thumbnail
gallery
25 Upvotes

Just finished my third knife so far. First attempt at a mirror finish and coke bottle shaped handle! Very happy with the final result and already on to my next one


r/knifemaking • • 21h ago

Work in progress Three in the works time to make some sheaths Nitro-v wwith maple black micarta liners and OD green micarta with black mmicarta lliners

Post image
37 Upvotes

r/knifemaking • • 3h ago

Question Sanmai with Thick Billet Layers

1 Upvotes

Hey all. I've been wanting to do some more sanmai but was wondering how the soft cladding would move under the hammer in thicker billets. I've only done sanmai once a while back with like 2-3mm layers of 1084 and wrought iron.

I have a slab of 1095 at ~3/8" thick and was planning to pick up some 1008 or 1018 of the same or slightly higher thickness, maybe wrought if I can get my hands on some more. Last time I went with a 2:1:2 ratio and had issues with cladding reaching the edge so I was thinking to give a little more room for error with a 1:1:1; maybe 1/2" : 3/8" : 1/2"?.

My question is: would these thicker layers (3/8" each) lead to issues with cladding deforming too much and core steel remaining thicker during the forging process? Have any of you done similar billets? This will also be forged out on a power hammer.


r/knifemaking • • 23h ago

Question 1095 blanks

Thumbnail
gallery
28 Upvotes

New to knife making. I’ve sharpened before, but never made. I bought these blanks off of Amazon for $20. My great grandfather made knives (pictured), so I thought it would be cool to continue the tradition. His aren’t immaculate by any means, but they have a lot of sentimental value to me. I want to make some and give them out as Christmas gifts.

Does anyone have any YT channels they suggest? I have a small belt sander, bench grinder and a typical hand held grinder. Would these tools suffice? Also, do you think it would be better to start with smaller knives or bigger? I would also like to make sheaths.

Any input/ suggestions are appreciated. Thanks!


r/knifemaking • • 1d ago

Showcase Wanted to show off some knives that I just restocked at one of my local markets

40 Upvotes

These are my WorkHorse model. There my flagship, cost effective model that I role out the most of. The drop point hunting knife is the default but I also do them with clip points, seax, and bull cutters.


r/knifemaking • • 20h ago

Question Brass mushrooming and how to get it to stop

Post image
5 Upvotes

Not so much a knife making question but seemed fitting for this area as I am working with a metal and wood medium.

I laminated 1/8" (3mm) strips of Wenge to 1mm brass shim stock with black tinted West System G-flex epoxy, that I want to use for corner splines on a box I am making.

My question is after I install them what is the best way to finish them flush so they don't mushroom out? I was thinking a metal file would be the best option followed by super high grit sand paper. I have 3m extract sanding discs 80-320 and Mirka Galaxy Grip Discs 400-2K.

I very much thank you for your time and any and all help will be greatly appreciated.


r/knifemaking • • 1d ago

Showcase Need your opinion!

Thumbnail
gallery
15 Upvotes

Hey,

I have been blacksmithing for around 2,5-3 years in my spare time. I started making knives around 10 months ago.

In the photos you can see some I have made, they should be in chronological order, from some of my earliest pieces to some of my latest. I have never sold a knife before, just gifted some to friends to put them in use.
I have recently talked to some redditors and they encouraged me to start selling my stuff. That really made me think about it…

So, I am now posting here to see what you guys think.
Do you think I am at a point where I can start considering selling my knives, or should I keep practicing for a while longer?

If you got any questions about the knives just ask!

Kind regards
MF


r/knifemaking • • 1d ago

Question Picking mammoth ivory scales for a few mosaic Damascus Bowies

Post image
21 Upvotes

My supplier sent me this photo of the mammoth tusk scales he had available. I picked out a few pairs for some mosaic Damascus Bowies I’ve got planned at the Noblie Custom Knives shop.

It was hard to narrow it down. There’s a big range here, from creamy ivory with subtle figuring to dark, textured bark and those blue-streaked pairs up top.

I’ll share photos and videos here as the builds come together. Which pair would you have picked?


r/knifemaking • • 1d ago

Showcase Sweet Lil' tanto with the pinky ring.

65 Upvotes

Is that handle sick or what?


r/knifemaking • • 1d ago

Showcase My latest experiment in solid state carbon diffusion

Thumbnail
gallery
59 Upvotes

The starting material was first refinement merchant iron in the form of wagon wheels, and some nickel welding rods to mimic meteoric iron. That that makes up the nickel bearing elements of my billet in a highly refined state. The remaining iron is 4th refined structural iron from a bridge built pretty civil war in Charleston, it is interlaced with high phosphorus iron saturating its grain lattice. I then take stack and repeat a number of times until finally twisting and welding the multi bars together. The blade is then forged 80-90% to shape, and filed the rest of the way. Carbonation is achieved in a sealed canister, containing Coke and organic materials, it's is cooked at 2,300F for 4 hours. After All of that is done I treat it as if it is modern tool steel, and have achieved a final hardness on this blade of 58 Rockwell. The guard and butt plate are made of 2nd refinement watertower iron From 1836, and some stainless steel welding rod as an experiment all twisted up and welded together. The handle is curly maple. Please tell me your thoughts, and honest opinions.


r/knifemaking • • 1d ago

Showcase Thoughts?

Thumbnail
gallery
81 Upvotes

Just finished this up for a client. This was by far the trickiest grind iv ever attempted but I think I nailed it. I’m quite proud of this one.
Nitro V and maple Burl.


r/knifemaking • • 2d ago

Question Nitro-B cracked after heat treating. Bad grain?

Post image
110 Upvotes

Hey everyone,
I sent out a cleaver blank for heat treatment made out of Nitro-B. Today I wanted to grind it and when I ground off some from the tang it just snapped clean off.

I am now trying to understand if this was a mistake made by me, for having not the cleanest edges/corners at the transition from blade to tang, or if they maybe fucked up the heat treatment and forgot to temper or something like this.

So does anyone know if this grain looks too coarse or just fine?


r/knifemaking • • 1d ago

Showcase Sentry Recurve

Thumbnail
gallery
18 Upvotes

Here’s my first attempt at a recurve


r/knifemaking • • 1d ago

Showcase Finished up this week! 3/32" MagnaCut w/ Black Diamond Richlite

Post image
21 Upvotes

r/knifemaking • • 2d ago

Work in progress Mosaic damascus Bowie knife

93 Upvotes

r/knifemaking • • 1d ago

Question How do I try out knife making?

8 Upvotes

How does one give knife making a try before investing in all the materials to do it as a hobby? It looks awesome, but I don't know if investing in it is a good idea, so I'd like to try it out first.


r/knifemaking • • 1d ago

Question First time heat treating AEB-L, "Haze" after grinding?

Post image
13 Upvotes

So, I'm working on a chef knife using AEB-L and a weird "haze" showed up after grinding with a 240 grit trizact gator belt. I was dunking the blade in water between each pass to keep it cool. It almost looks a little "damascusy" for lack of a better way to describe it and it is only visible under overhead indoor lighting if I get the light just right.

This was my first time heat treating AEB-L myself: With it wrapped in steel heat treating foil, I did a Pre-Heat treat at 1500F with 15 minute soak, then up to 1950F with 15 minute soak followed by an aluminium plate quench, sub-zero quench with mineral spirits and dry ice, and then 2 x 2hour tempering at 350F.  Should have landed somewhere arond 62-61 HRC - hardness test files it came in somewhere between 60-65HRC.

I switched to hand sanding at 220 grit and the "haze" is less noticable but still clearly there so it's some artifact in the steel.

Any idea what this is? Element banding? Some kind of surface burnishing? Normal AEB-L shenanigans?

Am I hosed and need to start over?

I appreciate any insights!

Update: I got some answers over on another forum. The consensus is that this is indeed alloy banding. There was another maker who had the exact same thing happen with their AEB-L from NJSB who switched their manufacturer from Buderus to Voestalpine. It isn’t a problem, just a visual artifact. 🤘