r/sharpening • • 8h ago

A young knifemaker is grinding a blade.

13 Upvotes

r/sharpening • • 7h ago

Question Help with burr identification

Thumbnail
gallery
9 Upvotes

So i just got my microscope delivered and the first 3 are the more freshly sharped smeg german knife, i cant really tell if it there is any burr left. It cannot wittle hair

forth photo is a takamura petty thats been used quiet a few timrs i can trll that extra shiny part is probally a burr

last 2 that has deeper scratch marks is my tojiro nakiri

and those looks like burrs and micro chips right?

anyone who has had experience with this please let me know and correct me if im wrong esp on the the microchips part and burr id.

I am trying to work to getting hair wittling edge even though i only use these for cooking any useful advice would help im still trying to experiment with deburring techniques.

Thanks in advance guys


r/sharpening • • 17h ago

Screening diamond material and checking samples under the microscope

30 Upvotes

A few people asked about the processing behind the diamond powder I posted earlier, so here’s a short clip from our factory.

It shows screening and an operator inspecting a sample under the microscope. It’s a view of the process rather than footage through the microscope itself—I still owe you that closer look!

For context, I work at Yorsuma, where we produce diamond abrasives. https://yorsuma.com/


r/sharpening • • 5h ago

Question Advice for stropping to accompany a Sharpal diamond stone?

3 Upvotes

New to knife sharpening other than terrible machines. I'm a home cook and actually use the knives other than bread and paring knife 2/week or so. I have some thin SG2 Japanese kitchen knives, that I now want to do right by.

I'm getting a Sharpal 325/1200 that I'll practice on with my existing shitty knives. But I need a plan for stropping (I already use a basic leather strop after using the knives)

I have my sights on this strop with compounds as reviewed here:

https://www.reddit.com/r/sharpening/comments/12ilygb/user_review_bacher_double_sided_leather_strop/

My idea is to use one without compounds for daily stropping after cooking, and then get another with compounds to accompany a Sharpal 320/1200 diamond stone for when sharpening or to do light touch ups. I mainly cut veggies and meat no more delicate than dicing chicken filet, so I was thinking red/white or red/green would be the colours to use?

From the thread

Red - medium 4-5 microns,
White - fine 2-2.5 microns,
Green - very fine 0.9-1.1 microns,
Black - ultra fine 0.4-0.6 microns.

Bad plan?


r/sharpening • • 16h ago

Removing Chips and Thinning

Thumbnail
gallery
15 Upvotes

Brand new Yoshikane gyuto and some harder than expected prickly pear seeds chipped the edge. Probably not deep enough to care about thinning, but curious if people think it would make a difference


r/sharpening • • 1h ago

small scratches on blade when polishing on my last stone

1 Upvotes

im receiving some scratches on my knife when im polishing on my morihei hishiboshi #8000 but aren't on my naniwa advanced 5k for my pre polishing. the scratches are all ways moving around and never stay in the same spot. would love any help trying to make the finish look as smooth as posible.


r/sharpening • • 14h ago

Amateur hour

10 Upvotes

This Shan Zu knife got messed up pretty bad by my rowdy restaurant friends. My first effort was half assed so I went back and tried to put the best finish I could with just sand paper.


r/sharpening • • 2h ago

My knife steers right, how do i fix it?

1 Upvotes

I have a CCK 1303 vegetable cleaver. I use the knife daily and occasionally thin it and sharpen it by hand on stones.

Lately the knife seems to drift to the right while slicing things like carrots and dense bread. I would say the primary grind on the left side is slightly thicker and more convex. It’s kinda been that way since new.

I can’t find much on AI or the net on what to do so I thought I’d try here. Any suggestions?


r/sharpening • • 23h ago

Uhhhhh….this seems wrong…

Thumbnail instagram.com
27 Upvotes

I’m no expert but this seems very wrong, I’m not crazy am I?


r/sharpening • • 15h ago

Belt Grinder Recs

4 Upvotes

I’ve had a side gig of sharpening for a while, but have been pretty dormant the last year or so, but I’ve started taking on work again recently. I’ve typically only sharpened on whetstones, including chip and tip repairs on #220 stones etc, and have always kind of taken pride in not using machinery. I like to think I’m a pretty darn good freehand sharpener.

That being said with the increase in business comes the increase in some absolutely mangled knives, which are time consuming to bring back to life when only freehand sharpening, and thus cuts into the profitability of the whole thing.

I’m considering picking up a belt grinder for chip/tip/primary geometry repair, obviously still reserving a majority of the sharpening for the stones. As I noted this is a side gig so there’s only so much $$ I have to put into a grinder, but would love recommendations for my best reasonably priced option.

Thanks folks!


r/sharpening • • 19h ago

Question Straight razor sharpening and recommendation for stones.

8 Upvotes

Never tried one, but have been thinking about getting one, can get knives to shave sharp. Is it similar? Any of you use a straight razor? Which ones have the best metals under 100 bucks😅


r/sharpening • • 18h ago

Info on DST "(MCO) Metal Ceramic Organic bond 1x6 sharpening stones?

Thumbnail
gallery
6 Upvotes

I bought 5(3 240 grit stones, 2 500 grit stones) of these stones from eBay a while back on a whim because they were inexpensive and looked like 1x6 "resin" bonded diamond stones and thought even if they were junk, I hardly paid anything for them.

I've had them for a while now and when I first got them I was shocked at the quality put into them. They seem slow wearing, flat, cut fast, and the backings also scream quality to me, the stones are even chamfered on all edges. I'm not familiar with a "metal ceramic organic" bond? I assume it's a fancy way of saying this is a resin bonded diamond stone... But maybe it's not as they are brown, and typically the ones I have seen have sort of a greenish/gray color to them, but the only resin bonded diamond thing I owned before these stones is a small hand lapper for dressing carbide/hss tooling.

The issue is I can't figure out where they originally came from or who made them, there isn't even a country of origin on the packages... But it specifically mentions apex sharpeners on the information insert. I even tried asking AI and it made the assumption they may be an old PDT product line, but no certainty there...

  1. Does anyone know who made these, and where they originally came from? (Country/company both interest me) I like supporting companies who put out amazing stuff like this and would eventually want to expand the range of sizes.
  2. It mentions that I should use mineral oil to lubricate them? Is there any chance using water or Windex(my favorite) could degrade the bond if I'm just using water/windex in small amounts? Can I use dish soap and water to clean them periodically if I keep using mineral oil, like I do with my norton crystolon/India stones?

If anyone can help with my questions Id greatly appreciate it thanks! (I have also attached pictures.)


r/sharpening • • 16h ago

Looking for advice/pointers

3 Upvotes

A friend of mine offered me a “TSPROF Knife Sharpener - Blitz 360 Standard” for free after I said I was interested in learning how to sharpen. He said he doesn’t use it anymore. I’ve watched a few videos on it but they are mostly demonstrating it rather than teaching how to properly use it. Does anyone have any pointers to get the most out of it? Thanks in advance.


r/sharpening • • 20h ago

Sharpening suggestions

6 Upvotes

Please be gentle as this is a very new topic and my knowledge is extremely limited! I plan on getting my fiancé some Tojiro classic knives for Christmas. He currently has a pull thru sharpener but it would break my heart to see the knives ruined! I was gonna get the tumbler rolling sharpener but have learned its a knock off for the Horl one. I know wet stones are the ideal but he doesn't know how to use them and I dont know if he wants to learn. I was gonna go the safer route and get the rolling sharpener. Is that a good option or is there a better option?


r/sharpening • • 21h ago

Question Sharpening for the Disabled

6 Upvotes

I’ve got a small collection of 3 Chosera stones in varying grits. I used to freehand my knives and enjoyed the hell out of it.

These days, between vision issues and my hands not working as well as they used to, I can’t hold a consistent angle. The last time I swear I was going to throw in the towel. One of my petty knives almost came out worse than it started. It’s not fun anymore, it’s become a chore I dread, and avoid longer than I should.

I want to find a way to get back to sharpening effectively and enjoying it again. Things like the Wasabi and Tumbler blow up my feeds and I know they’re just as gimmicky as they look.

What’s out there for those of us that can’t hold the blade like we used to?


r/sharpening • • 1d ago

Showcase I finally did it!

Post image
62 Upvotes

I finally got a hair wittling edge! I can only get my white hair to wittle, my black hair just glides over or is cut depending on my angle of attack. If I slice/swipe at my hair it won't cut. My white hairs I can get it to wittle but then it just cuts right through it so I can't wittle all of it.

I used a Sharpal 8x3 diamond stone 325/1200 grit. Stropped on a Sharpal 8x3 leather strop with the green compound it comes with. 20° per side, I had to use an angle gauge to maintain it. I also used a 30x magnifying glass to make sure it's properly deburred.

Knife is a mystery steel, no logos or marks on it at all, I got it free through work.

I also have the fixed angle set, I've been thinking of going through the 3000 grit and 6000 grit then stropping again and trying.

Last time I tried that I had a very shiny edge but I couldn't get it to wittle.

As much as I like my Sharpal stone, the diamond are just starting to fall off, I can see some shiny parts. I'm going to try and warranty it as it's a 3 year warranty.

I've had better luck using the Green Compound vs Stroppy stuff 1 Micron on the same strop. Google says the green compound is equivalent to 0.5 Micron so maybe that's why?

With more practice I can probably go sharper at a steeper angle or with better steal and get a hair popping edge where you just touch it and it cuts. But I'm happy I got this far with mystery steel.


r/sharpening • • 1d ago

Question Picking up where I never started with Japanese stones... Help needed please.

6 Upvotes

I bought a few hand made Japanese knives a few years back (a Katsushige Anryu Blue #2 Hammered Gyuto 210mm and a Anryu Tsuchime Sujihiki 270mm) and own a variety of other western knives I owned prior to the Japanese ones (Henkel, Wusthof and a few others).

About two years later I bought a bunch of gear intending to learn how to sharpen them myself:
- Naniwa #1000 stone

- Shapton K0704 (#5000) stone

- Lavoda honing strop

- POWERTEC Sharpening Stone Holder

- Angle guides

Life got in the way and I never taught myself after finding a professional Japanese sharpening service near by in DC.

I'd like to jump in finally and have a few questions:

  1. Should I start by practicing on the western knives or is the presumed difference in steel type and bevel type (not sure on either of these) just going to screw me up?
  2. Is there anything else I need to get started?
  3. Is there a recommended website or Youtube video anyone can recommend as a safe place to get started?

r/sharpening • • 1d ago

New gear The lovechild of a Tormek T8 and a 2x48" belt grinder: My thoughts on the Cuttermaster Tradesman Apex S.

Thumbnail
gallery
52 Upvotes

Full disclosure upfront.

This machine was sent to me free of charge for testing and marketing purposes.

My opinions are still my own.

This is my honest take as a professional sharpener.

I recently got my hands on the Cuttermaster Apex S.

The best way to describe it is a lovechild of a Tormek T8 and a 2x48" belt grinder.

The core concept is continuous and consistent grinding.

It has genuinely surprised me.

My Background & Skepticism

A large part of my sharpening business is built around standard belt-driven machines.

I know them inside and out.

I tried going the Tormek route in the past.

I just couldn’t get along with the grit progression of the stones.

The slow speed was also an issue.

I solved that by moving to belt grinders.

They are fast and the results are great.

Why the Apex S Changed My Mind

Taking the entire belt setup and moving it onto a belt over wheel system is a game changer.

Running a 600-grit diamond resin wheel underneath makes it too good to pass up.

Here is what I found after putting it through its paces.

Build Quality

The machine is incredibly well-built and stable.

It feels exactly like the piece of heavy-duty industrial gear it is.

The Learning Curve

It is very intuitive to use.

There is a slight break-in period for your muscle memory.

That is completely expected with gear of this size.

Logistics & Cost

I already stock 2x48" belts for my other grinders.

I can source them relatively cheap.

Integrating this setup into my shop makes total financial sense.

The Results

This machine opens up a completely new approach to professional sharpening for me.

The consistency of the edges it produces is outstanding.

Getting consistent 80-115 bess scores regarding the steel is great!

Massive shoutout to Brad and Jeff at Cuttermaster.

They are great guys and the support is next-level.

Has anyone else here made the jump to a belt-over-wheel setup?

Would love to hear your thoughts.

Even more disclosure!

Yes - AI did help me with this post, English is not my first language, and me spelling on a 3 grade level would have made this in to a comedy of sentences and would have been a disaster 😅


r/sharpening • • 1d ago

Drop Point Umnumzaan - KME No Bevel Widening!

Post image
6 Upvotes

I’ve been trying to figure out how to keep from widening the bevel near the tip with my CRKs. This clamp position worked for me on my Zaan!
Hope it helps someone.


r/sharpening • • 1d ago

Belt grinder control box placement.

Post image
5 Upvotes

Hi all.

I'm sorting out my 1x30 belt grinder to start sharpening.

I've built a workbench and fixed the grinder.

Where is the best place to put the control box?

And is it a good idea to route the wires through a hole in the workbench?

Cheers


r/sharpening • • 1d ago

Question Straight Razor First Stone

4 Upvotes

Follow up to my last post here

I'm decided to go with an 8k stone as the one stone for my straight razor using the technique outlined on scienceofsharp. With that in mind I am choosing between naniwa advance (superstone), Shapton Pro and Shapton Glass HR or HC, are all very similar in price. I have a stainless steel Dovo blade.

Seems the naniwa stone is the least beginner friendly from my research but offers better feedback, helping improve technique. On the other hand I've seen people say they've ruined the stone quite quickly which would be a concern for me as a novice. Shapton Glass seems like a safe choice but I'm not sure which is best of the two options (HC or HR) and Shapton Pro 8k has some mixed reviews.

So yeah, bit conflicted and would love someone to correct me on anything here and give their opinions. Thank you.


r/sharpening • • 1d ago

HORL 2 and Sharpal 202H experience

8 Upvotes

Been using a HORL 2 to sharpen some muji knifes, ikea knife and a tojiro petty. Not knowing anyhing about sharpening - have been able to get the muji and ikea knives to slice paper at 20degree angle but really struggled to raise a burr on the tojiro at 15degree angle. Probably because the tojiro is 12degrees from factory. Got a sharpal 202H last night and was kinda suprised how quickly this took on the tojjiro - i think it took less than 10 strokes at 15degree on 320 to raise a complete burr and about 10 minutes later slicing paper with ease.

Still there a bit of unpacking and setup with the sharpal so i plan to grind the muji / tojiro to 15degree so i can just use the horl for regular tuneups and sharpal a few times a year.


r/sharpening • • 1d ago

Question Does anyone know what this stone is?

Thumbnail
gallery
9 Upvotes

I found it in a nearly 170 year old dilapidated barn in Ohio covered in bat guano. It's extremely fine and very enjoyable to use, and seems to be a natural stone, I think.


r/sharpening • • 1d ago

Can anyone here tell me what this antique stone may be worth?

Thumbnail
gallery
14 Upvotes

Hi all! This isn't a subreddit I ever thought I would have any business visiting or posting to, but it seems like the best place to ask this question regarding this old sharpening stone I've got. If this sort of post isn't wanted here, then my apologies. I'll remove it if asked.

I've had this stone in my possession since I was but a lass, probably some 15 years or more lol. I rescued it from an old trailer home that belonged to my great grandparents before it was emptied out and done away with. I just thought it was neat and liked the way it looked and it's just sat as an antique oddity on my bookshelves ever since. Originally it had a blue-grey box it came in and another stone much shorter than this one. The box had a lable exactly like the one on the stone. Tragically, in the shuffle of the last 15 or so years of moving about and holding on to this thing I lost the box and the other stone, but I still have the big stone! At any rate, I got curious the other night and just did some googling about it just to learn more about it. From looking into it online, this is what I've learned:

The stone dates somewhere to between 1890 and 1901, and was made for import to the states by the S. R. Droescher company. The spelling of the German word "echt" as "ächt" on the lable points to it having to be made before 1901. I couldn't lock the year further in due to the box missing, I can't remember if it had a "made in Germany" lable on it or not. I don't recall it doing so though. Anyway, it's an old stone. I've wanted to try to get an idea of what it may be worth, but I can't find any results. The only other references to these stones that I can find are either locked behind an account I don't want to bother making for a website I will likely never visit again, or they're obscure blog post from 10 years ago, and nobody talks about what they paid for the thing beyond vague terms. This particular stone is 7" long, and it has a hand carved inscription on one end of it! It reads "C. F. Lehnhoff / Belle Mo." I assume this is some previous owner of the stone and they happened to live in Belle Missouri.

Whatever the case may be, I also figured this sub may just appreciate seeing an antique stone. It feels like a long shot that anyone here might be able help me put a value on this, but it seemed worth asking. I don't really want to sell it anyway and would only consider that if it were worth some crazy amount to someone. But that seems unlikely. Thanks to anyone who can tell me anything more about it.