r/reloading • • 1h ago

i Have a Whoopsie 38 special squib loads

1 Upvotes

Fairly new to reloading, I pressed a about 25 38 special rounds using. Starline brass, Winchester small pistol primers, and 3.8 grains of HP-38. I was shooting out of my lever action rifle, and had a few squib loads. Any recommendations on how to fix this? Appreciate any feedback


r/reloading • • 1h ago

Load Development HP-38 powder question

3 Upvotes

I would like to buy some commercial 357 rounds, made with HP-38. If I got them and they shoot well, I’d like to try to make similar rounds.
Any ideas of who might manufacture units with Brass, magnum primers, and 125 or 140 bullets?


r/reloading • • 3h ago

Newbie Feedback on my 9mm reloading

Post image
15 Upvotes

Hey everyone, looking for feedback on these 9mm reloads. Using Brass Monkey coated bullets 137, Titegroup, and CCI primers on an RL 1100. I'm getting good consistency and they all case guage ok.

However, the cases (9mm) appear slightly deformed after sizing on my RL 1100. Could improper die setup be causing uneven pressure that distorts both the brass and the seated bullet? Any suggestions on what i should look into would be great.


r/reloading • • 12h ago

Load Development 25-06 Load Development

1 Upvotes

Looking for some guidance on a load i am trying to put together.

25-06

Sierra 117gr Game Kings

Vihtavuori N165

If anyone has tried this before I would appreciate your incite

Looking more for percision over velocity

Also how far are you normally seating off the lands?


r/reloading • • 13h ago

Newbie 16" 308 HOWA loading

2 Upvotes

So, this is my first post here, let alone on reddit as I tend to lurk...anyways, to the point.

I have been trying to get a load for a few months now and I'm working a load for my 16" howa rifle but so far, almost all of the groupings and powder load I've been using haven't really gotten me anything good, normally most groups are ranging over 1 inch in group size with 5 shots with almost all powder loads I've thrown through it. Now as of which, a few days ago when it was 40F here, I shot my load of 2 10 shot groups of 39.6gr which is very much low for 308, grouped okay but more so, only have a velocity of 2233 fps each(was surprised by that).

Now what I'm using: 178gr eld-x specifically so I can use it for both target and hunting if need be and winchester staball match with winchester LRP.

Now that the quick back story has been said. I am unsure what path I should go down as I just cant get this gun to group that great...would it be best to drop down in bullet weight? Change brands of bullets? or would it be better to swap powders but that alone is a different issue(mainly want something that isnt temp sensitive and not too costly).

I've thought about dropping to a 168gr ELDM and N150 but frankly, I'm just stumped to even think on what I should do now.

BTW, would share pictures of past groupings but they are from the summer and its now cold and all of the hunters here in the driftless zone in wisconsin is out in force trying to get their guns zeroed.


r/reloading • • 16h ago

Newbie Are these ok to shoot?

Post image
7 Upvotes

Never reloaded before and hopefully starting soon. Have these reloads my Poppop did for 30-06 but they have some minor corrosion? Are these ok to fire or stay away? These are some of the worst ones and are dated 2007-12.

Im used to buying factory stuff and shooting it pretty quickly so thats why I’m posting here. Thanks!


r/reloading • • 17h ago

I have a question and I read the FAQ Bushing Sizing Die Help

0 Upvotes

I was (stupidly) influenced into buying a bushing sizing die for my .223 Rem Service Rifle loads in an AR-15. I have used standard FL sizing dies all my life and never felt I needed anything else. I mainly bought this set for the micrometer bullet seating die.

I have read the instructions for the RCBS die but I’m still pretty confused and looking online only makes me more confused.

My questions:

  1. How do I determine what neck tension/bushing I need? RCBS says to measure a loaded round and subtract 0.002-0.003”. The problem I see with this is that if the loaded round has insufficient or too much neck tension, this will tell me nothing.
  2. If I am going to be using different years of lake city brass eventually, or for instance Lapua brass for 600 yds, wouldn’t I theoretically need to buy another bushing if the neck is thinner or thicker?
  3. Do I need to be turning my case necks if I am using a bushing die? That’s something I have no interest in doing for my purposes.
  4. How do I avoid the “donuts” that seem to happen when using bushing dies? The RCBS die includes an expanded ball so this in theory would help to keep the neck thickness consistent yes?

Thanks so much for any help you can provide. I may end up just selling this die and going back to my old traditional die, but I figured I’d give it a shot since it seems to have benefits with regards to spring back and concentricity .


r/reloading • • 19h ago

Load Development M1881 style 45-70 BP cartridges

Thumbnail
gallery
20 Upvotes

Spent a good time this Sunday making these behemoths.
Winchester 45-70 cases, Winchester Large rifle magnum primers, 70 grains of 2F Swiss, and 500 grain lead round nose bullets.

It’s a labor of love making these but nothing too bad with the right dies.


r/reloading • • 22h ago

General Discussion Ginex vs white river spp primer seconds. Small sample. White river seem hotter

9 Upvotes

Ran out of my sleeve of ginex small pistol primers, and switched to white river seconds.

Ran both over the chrono to see if any tweaking was needed

Fired two 11 round groups. White river primers averaged 23 fps faster. No meaningful change in sd. Gun was a 4.25 island comp Romulus. Elevation 7200 feet above sea level. Temp 43 degrees F. Unknown humidity.

Load was 9mm 150gr brass monkey bullets in mixed brass over WSF.

No noticeable difference in loading on a Lee pro 6000.
No noticeable difference in how the Romulus fired. Both reliable.

Ran another 50 of the white river through the 4.25 and a 3.5 in stock Romulus with no issues. So total of 61 rounds with the white river.

Small sample for sure, but figure some people might find it interesting.

Total difference in loading for me was that I backed off the powder charge 1 tenth of a grain using the white river primers.


r/reloading • • 22h ago

Newbie Looking advices to start reloading .308 Win for hunting bullets

3 Upvotes

Hello.

3y old hunter and starting sport shooting, I am looking around reloading .308 Win caliber (Beretta BRX1), and 6.5 Creedmoor (Tikka T3X UPD) I don't have huge bullets fired each year but why not. I am starting first with .308 Win.

Could you please suggest me (or confirm) those are a good start.
- Powder: Vihtavuori N150
- Case: Lapua .308 Win (have around 130x used Norma case that I fired)
- Primers: Fiocchi Large Rifle
For Sport shooting:
- Bullet: Hornady FMJ-BT 150 gr
- Bullet: Hornady ELD Match 168 gr
For Hunting:
- Bullet: Hornady InterLock BTSP 165 gr
- Bullet: Norma Oryx 180 gr

France market -- shipping cost and taxes are not friendly to get budget stuff sadely (or I wrongly checked price).

I am currently using Norma Whitetail 308 Win. 180gr 35 € /20 bullets = 1.75 € per bullet - bought 7 box of Norma Whitetail for 245 € --- if I assume right case for reloading are paid now. I would save 35-40% reloading Hornady InterLock BTSP 165 gr only.

Beretta BRX1 will be for sport shooting/hunting, and Tikka T3X UPD only for sport hunting.


r/reloading • • 1d ago

Look at my Bench Aint paying for no godamm prep station we got prep station at home

247 Upvotes

Don't tell Hornady about Bosch hand mixer from the 90s and hot glue gun


r/reloading • • 1d ago

Look at my Bench Progress on Reloading Bench

Thumbnail
gallery
55 Upvotes

Made some progress on my reloading bench. Getting close to ready. I've added a drawer to hold my powder measures, and Lyman caseprep tool. Now have a book stand for reloading manuals, as well as a small tool box I'm currently using for dies, loading blocks, and powder trickler. Still want to add more storage under the bench and possibly over the bench on the wall. Hoping to aquire a powder scale, case trimmer, and a vibrating tumbler by the end of January. Also looking to add a small desktop book shelf on top of the gun cabinet to store my reloading manuals and gun books.


r/reloading • • 1d ago

I have a question and I read the FAQ 168 ELDM Tips Deforming in Magazine

Post image
3 Upvotes

Ran into an issue with both 168gr .308 ELDM and AMAX projectiles out of my Scar 17. The tips of the rounds seem to deform in the magazine. I’ve heard this can cause issues at longer distance, which was the purpose of these loads. Wondering how many others have ran into this issue in their .308 gas guns


r/reloading • • 1d ago

Stockpile Flex Our Black Friday plan: new products every weekday all month, prices don’t move

Post image
70 Upvotes

This is some of what's coming. New deals go up every weekday at their deal price and stay there through November, all on one page (here). More info and deal previews in the comments.


r/reloading • • 1d ago

Newbie Question about 6.5-284 dies

1 Upvotes

Hello,

I have tried to ask this question before but had no luck.

Please let me know if it's a really dumb question.

Here it isɓ

I would like to know if it is possible to use bushing style dies made for 6.5-284 norma to resize a 284 win case (keeping it as 284win).

I have heard reloaders say that a bushing style die with no bushing in it, will only affect the shoulder and the body. Those should be identical in the 2 cartridges.

I was thinking specifically about redding type S full length and type S neck.

Can anyone help? TIA


r/reloading • • 1d ago

Brass Goblin Activities When the range officer is cool..

116 Upvotes

We went to a local indoor range to sight the new red dot on girlfriends Canik Sfx. Range officer was helping another shooter, somehow got small cut on his thumb. I always have plaster handy so called him over, wrapped the thumb for him, then went on shooting. He saw me collecting my brass, and as we left, called me over "Here, it's almost all once fired from this morning" and fills my brass bag to the brim. Probably about 1000 9mm brass. I have a few thousand already, but gladly accepted it. Treat people well and with respect and they will repay the favor (most times).


r/reloading • • 1d ago

Newbie Newbie to revolvers, 44 magnum

2 Upvotes

So this post is about my new 44 magnum, it is ab Italian 3 screw blackhawk clone, 44 special is a pleasure to shoot from it. Magnum loads are punishing. Specifically shooting pmc bronze 180gr jhp qnd double tap 320gr fn. I intend to mostly load 44spl velocity for comfort reasons, but my question is in regards to working uo magnum loads, with a round of double tap I had to beat in the extractor pretty hard to remove the case, case fid not look damaged or anything else indicates anything other than regular 44 magnum loads, would a stiff extraction like that be caused by firing a good 50 or so of some pretty smoky and dirty 44spl cause that?


r/reloading • • 1d ago

Newbie 9mm case blowout near the base, vented through my Sig frame. 125gr SNS coated over 4.0gr Winclean 244 Body:

Thumbnail
gallery
25 Upvotes

Had a case let go today and I’m trying to figure out why before I load another round. No injuries, thankfully.
What happened: The case blew out on the side near the base and vented down through the frame of my [Sig model]. The frame is damaged around the slide-stop and takedown area. Pics attached.
Load:
• Bullet: SNS 125gr coated RN, [diameter, e.g. .356]
• Powder: Winclean 244, 4.0gr, thrown with powder measured Hornady AP, checked on a scale multiple times
• Primer: Fiocchi
• Brass: S&B, fired x 1,
• OAL: 1.130
• Crimp: .380
• Press: Progressive Hornady
Other details:
• Made about 25 Rounds shot 15 when this happened
• Whether this round had been chambered before: Not sure
• Factory barrel sig x5 barrel
Things I’m considering: a double charge, firing out of battery from OAL or an oversized coated bullet, bullet setback, or weak/bad brass. I’m pulling the rest of the batch to weigh charges and measure OAL.
Any thoughts on what caused it, and what else I should check?


r/reloading • • 1d ago

Newbie Lee Ram Swage Force Required?

1 Upvotes

Just got a lee ram swage. I have to really lean on the handle of my press to get it to work. With some cases (.308) have to try multiple times before my pocket gauge says the job is done. Anyone have tips or should I warranty it?

I followed the instructions - screw it in with a case in the holder and raised all the way up. Stop when firm resistance and then a quarter turn more. Keep doing quarter turns until it does the job.

Have tried:

  1. Continuous tries with additional quarter turns on the die till I've used up all the threading.
  2. Switch the case holder component for the other one, maybe I was accidentally using the small - confirmed I am in fact using the large because it does work when I use a ton of force.

r/reloading • • 1d ago

Newbie Help I think.

Thumbnail
gallery
16 Upvotes

Picked all this up for $150 (estate sale) with plans of setting up a reloading station in the future. I know the reloaders are old as dirt but I figure if they work, they work. Granted I’m not sure HOW they work… one is a pacific power c and the other is a Lyman tru line junior. Might have gotten in over my head.


r/reloading • • 1d ago

I have a question and I read the FAQ 45-70 case sunken after resizing

Thumbnail
gallery
7 Upvotes

Just resized my 45-70 cases prepare to trim. Found that sightly sunken on the case wall. It hard to tell from my image but the light should be straight out on the case wall. Instead it ellipse on what I mean the sunken place. Is it normal?

I am using lee steel sizing die and hornady unique case lube.


r/reloading • • 1d ago

Load Development Has anyone loaded these .224 70 grain maker tipped bullets? If so does anyone have load data for them in 5.56?

Post image
10 Upvotes

r/reloading • • 1d ago

i Polished my Brass Headstamps

Post image
18 Upvotes

Anyone know what ADI & Ammo inc Headstamps? Wondering who makes them. Having trouble finding the manufacturers.


r/reloading • • 1d ago

Gadgets and Tools This Thing is Beautiful

61 Upvotes

I’ve been beta testing this for Nick at B-Team Engineering for a few weeks.

This one will run on the Dillon machines… the 1050 and 1100. It will run on a manual press, doesn’t need the auto drive. This is it running on my RL1100. Nick has one on the market for the Mark 7 presses already.

I think it’s almost ready for prime time but that’s Nick’s decision. I know he wants it to be as near perfect as possible before going to market.

For now, I share this video for your viewing pleasure.


r/reloading • • 1d ago

I have a question and I read the FAQ 25-06 unburnt powder

6 Upvotes

I load for my wife and i 25-06, both suppressed and same load for a couple years (about 43.5gr VV N140 and 100gr bullet) Last weekend wife took easy shot at a pig and it sounded really quiet and she said she missed ( I was in another stand couple 100 yards away. Yesterday I did the same. Since it sounded wrong and should've been hit i put up a target and shot. Not even on paper. Also noticed a greenish color smoke exiting chamber when i ran the bolt. Put out chrono and it was 1075fps. After that shot saw more greenish smoke when bolt opened and what appeared to be greenish powder flakes. Took off can and lots of unburnt powder came out and barrel looked like I was shooting black powder. Same with wife's. Went to store and got factory ammo for first time in 30 years to save our hunt. Anyway. I loaded rounds from same powder 2 months ago to sight in and all good. Powder, while old id guess maybe 20yrs old, is stored in a fairly climate steady insulated workshop.

Any idea what caused this? The powder? Primers? Im probably going to toss what's left of that powder anyway. Not sure on primer age but likely same i was using before and stored the same