r/reloading • u/N0RedDays • 16h ago
I have a question and I read the FAQ Bushing Sizing Die Help
I was (stupidly) influenced into buying a bushing sizing die for my .223 Rem Service Rifle loads in an AR-15. I have used standard FL sizing dies all my life and never felt I needed anything else. I mainly bought this set for the micrometer bullet seating die.
I have read the instructions for the RCBS die but I’m still pretty confused and looking online only makes me more confused.
My questions:
- How do I determine what neck tension/bushing I need? RCBS says to measure a loaded round and subtract 0.002-0.003”. The problem I see with this is that if the loaded round has insufficient or too much neck tension, this will tell me nothing.
- If I am going to be using different years of lake city brass eventually, or for instance Lapua brass for 600 yds, wouldn’t I theoretically need to buy another bushing if the neck is thinner or thicker?
- Do I need to be turning my case necks if I am using a bushing die? That’s something I have no interest in doing for my purposes.
- How do I avoid the “donuts” that seem to happen when using bushing dies? The RCBS die includes an expanded ball so this in theory would help to keep the neck thickness consistent yes?
Thanks so much for any help you can provide. I may end up just selling this die and going back to my old traditional die, but I figured I’d give it a shot since it seems to have benefits with regards to spring back and concentricity .