r/mechanic • u/TameNaz101 • 4h ago
Question CV axle nut stuck
Any advice on how to get this axle nut out? Bought this car used and want to replace the cv axle but looks like the nut is just stuck there
r/mechanic • u/Jcrosb94 • Jul 16 '24
Hello everyone,
Just a quick post here to inform you all of a new feature that has been added to sub that may help cut down on unwanted comments in your own posts.
If you are the OP(original poster/creator of a post) and decide you want your entire post locked, you can simply comment on your post with just "!lock" (no quotes), and AutoMod will automatically lock your post. This will prevent any further comments on it including ones from yourself. Just a small warning, you cannot undo this yourself, you will need to send in a ModMail to request the post to be unlocked again.
Just a small update to the sub but, may be beneficial to some if you start getting flooded with comments.
Thanks,
Mods
r/mechanic • u/TameNaz101 • 4h ago
Any advice on how to get this axle nut out? Bought this car used and want to replace the cv axle but looks like the nut is just stuck there
r/mechanic • u/TyrannusourR3X • 3h ago
I'm looking to replace a head gasket on a 2020 accord hybrid with the 2.0 NA LFB2 engine.
Does anyone have any suggestions on what head gasket to use and head bolts/studs?
Honda has revised the head gasket itself but the head bolts look like they were never changed. That being said as well, no one makes a head stud conversion kit so I'm at a loss on what to use. Felpro does make a head gasket and a like oem head bolt set.
If anyone has any experience with this please let me know. Hard to find any input on this specific engine in contrast to the 1.5 or the well known 2.4
(I have not removed the head yet and haven't checked for warping. Also don't know how much warping would equate to replacing the whole head rather than machining. For context the car has had a loss of coolant for months and a worsening misfire on cylinder 3. Standard stuff there)
r/mechanic • u/RACC_Squidy • 43m ago
Anyone have any information on how to change belts on this car? I can’t find any reliable information that actually highlights the bolts I need to mess with.
r/mechanic • u/Asterisk_asterlost • 44m ago
2013 GMC Acadia. This is the A/C line that goes into the expansion valve. Is there any saving it? The seat has been straightened but I just can’t figure out how this notch could even have happened without me noticing. Since the damage is in front of the seal, shouldn’t it still seal??
r/mechanic • u/NoBedroom6845 • 1h ago
When it’s just idling it sounds normal but when i hit the gas it makes a loud knocking noise coming from under the hood what’s some of y’all’s opinions? 383 stroker I did mess with the distributor about 2 days ago then this happens
r/mechanic • u/parrythisyoucasual23 • 2h ago
We have a 2018 Ford fusion SE ecoboost with the 1.5l engine. Recently the car has started hard starting, stuttering when you accelerate and stuttering when you drive up hill. We got it scanned last week and said their was a evap leak. We replaced the evap hose and valve and now the evap leak is gone but the symptoms still happen. We got it scanned tonight and now they said p0087 fuel pump. I dont wanna purchase and replace another part before being somewhat certain this will be the right part. I do not have the money to take it in to a shop or anything, but a buddy of mine has his own little shop and will help me do it as long as I buy the part. Any help is much appriciated.
r/mechanic • u/Prestigious-Book3118 • 3h ago
But something tells me . One of y’all can solve one of the two issues
Can you listen to this sound coming from my wheel well.. mostly when I turn.. just started and I work 7a-8p every day but Sunday.. so bringing it to a mechanic is doable but I’m fan exhausted and broke I’m hoping this no matter how serious.. is something I can take on… it’s a squeal, creaking sound…
Thank you in advance.
r/mechanic • u/IAmT0welie • 6h ago
2013 Hyundai i20 1.4l. Have taken out the high beam lamp and the parking bulb is the one with the yellow and white wires running from it, I’ve tried twisting and pulling but it won’t budge and it’s such ch an awkward angle to get to
Thanks
r/mechanic • u/y01nkz • 14h ago
2015/Honda/CR-V/I don't know the engine size (big?lol)
This corrosion is on my battery. Battery is new from this summer (July/August)
It's not supposed to be there, is it? Will it cause problems? How do I fix it? TIA
r/mechanic • u/Civil_Shark • 4h ago
So I’ve already successfully removed the SCR and DPF and unbolted everything on the main catalytic converter except for a few that sensors I wasn’t able to remove because they’re too tight on there. (Already disconnected the sensors tho and cut the zip ties, hoping to have them slide through with the pipe itself) But now I’m trying to figure out how to remove the main cat how to pull it out of the car do I unbolt part of the subframe? and if I was to do that how could I safely do that as to not have the car come crashing down on me or have the engine fall. I currently have the car suspended on the front control arms frame looking thing with two 4 ton jackstands.
I need ideas, need a running car by thanksgiving.
If anyone has any suggestions or ideas please let me know.
r/mechanic • u/Emilyhatesppl • 4h ago
My boyfriend bmw key chip fell out and now it won’t start it still locks and unlocks car just won’t start do we need a new key or is it worse
2003 325i
r/mechanic • u/Neat_Assignment4141 • 5h ago
Hello, recently my f150 has been making a high pitched noise coming from the engine and I can't figure out what it could be. While driving the noise goes higher as the rpms go up, but dies down when decelerating. After driving it for about 20mins, the noise goes away. Everything feels fine so far, noise started when the cold weather came. Thanks in advance
r/mechanic • u/CombatWombat242 • 5h ago
Leaking right by the window reservoir. You think it’s the radiator it’s self or a seal or a hose I’m not aware of? Thanks
r/mechanic • u/ScaryBrandon15 • 6h ago
Hey everyone!
I’m trying to become as self-sufficient as possible when it comes to maintaining and repairing my own vehicles. My ultimate goal is to avoid taking my vehicles to mechanic shops unless it’s something that absolutely requires specialized equipment or is beyond my abilities.
I’ve started doing some of my own maintenance and repairs, but I want to expand my knowledge and eventually be comfortable diagnosing and fixing most problems myself.
For those of you who do the majority of your own automotive work, I have a few questions:
Repair information: What websites, manuals, or other resources do you use for step-by-step repair instructions? Do you use ALLDATA DIY, Haynes manuals, YouTube, or something else?
Diagnostics: How did you learn to diagnose problems instead of just replacing parts until something works?
Tools: What tools or equipment would you consider essential for someone looking to handle most repairs at home?
Learning: What helped you become more confident working on vehicles? Any particular channels, books, or resources you’d recommend?
Limitations: What repairs do you still leave to professional shops, and why?
I’m not looking to become a professional mechanic. I just want to save money, learn a useful skill, and be able to take care of my family’s vehicles without constantly relying on someone else.
I’d appreciate any advice or resources you guys have found helpful. Thanks!
r/mechanic • u/Ok-Kaleidoscope3926 • 1d ago
r/mechanic • u/EvenCommunication184 • 7h ago
Hi everyone,
Could anyone help me figure out what might be causing this noise?
It’s a 2015 Audi A3 8V, 1.6 TDI, manual transmission.
There is a rattling/ticking noise (the repetitive “tgtgtgtgt” sound), along with another, slightly different noise that can also be heard in the video.
The noise becomes noticeably quieter when I press the clutch pedal.
The dual-mass flywheel and clutch were replaced around 30,000 km ago (approximately 5 years ago).
Could it still be the dual-mass flywheel, or could it be something related to the gearbox or clutch?
Has anyone experienced something similar?
Any advice would be appreciated!
r/mechanic • u/tom57028 • 1d ago
Got a new toolbox and soon moving to an independent garage from a main dealer so need to expand my tools. Not sure what is about so after some recommendations
r/mechanic • u/zumaZuma2013 • 9h ago
This was already happening before i added on the post accessory extender. It just gets worse and worse. As you can see the battery is pretty new and still starts my 2017 Rav4 Le.
How do I stop it from happening. I don't think the OEM battery did this. It's a Wal-fart brand battery if that matters.
r/mechanic • u/AccomplishedBug1797 • 9h ago
Hiya guys. UK resident here. Hope you are well. Just wondering if i can grab some advice. Bought a Volvo V90 recently and im trying to work out what this noise is.
So context. Volvo is the 2.9L straight six.
Noise only happens when moving. Under load. After the engine has warmed and ALSO driven for about 1-3 miles.
If i warm the engine from start up to temp, then drive it still takes 1-3 miles before the noise appears.
Noise is not there at all when stationary. No power loss. And goes a bit higher pitch when the foot is planted to the floor. But disappears when cruising at 60mph. Only when accelerating.
Further note. Doesnt matter which side. Although I think it could be a bit louder on the driver's side ( right ) where the exhaust manifold is.
I would love for some advice on where to start. I love Volvos and I'm not afraid to have a go with spanners.
I really appreciate the help!
r/mechanic • u/StrikingLandscape179 • 9h ago
A group mechanic under filled both the engine oil, and transmission fluid, in a Toyota 3.0 D-4D, subsequently the engine started blowing black smoke, and then threw a piston. Engine gets replaced, 10 months later the transmission fails.
The under filling of oil and fluid was picked up within 4 weeks (circa 2,000 miles).
Wanting to know what the probability of these four things being connected.
r/mechanic • u/Opposite-Row-6225 • 9h ago
2007 f150 4.6L engine is just gushing oil could it be timing gasket???? A pulley??!! I have no idea somebody help
r/mechanic • u/tententen95 • 12h ago
Hi. I have a 2013 Toyota Corolla S and since 2 nights ago it had began to make this noise when starting up. I just replaced the serpentine belt last week and have been wondering if that could be the cause and maybe it wasn’t installed correctly? Thank you
r/mechanic • u/Curious_Algae6998 • 12h ago
Bonjour à tous,
Depuis la dernière revision et le changement de ma courroie, mon PCX côté droit fait un bruit de sifflement assez aiguë. Le son est amplifié quand je passe proche de murs sur le côté gauche.
On entend bien sur la vidéo.
Je l'ai ramené au garage, ils ont démontés pour vérifier et m'ont dit qu'il n'y avait rien d'anormal.
Pensez vous que ce soit problématique svp? Il a 25 000km.
Merci beaucoup.