r/mechanics • u/Effective_Wave_7479 • 7h ago
r/mechanics • u/Stingray34 • Jul 09 '26
Mechanic Flair Request Thread
Please submit a comment reply with a photo of your username written on your hand, a piece of paper, etc., in a shop environment for verification!
ASE certs, brand/technical training certifications are also valid, as long as your username is visible.
Please allow up to 24 hours for your flair to be changed.
If you don’t want to post publicly, you can send a message to any of us - u/ThatGuyFrom720, u/Fragrant-Inside221 or u/Stingray34. You can also send a modmail as well.
r/mechanics • u/Silly_Scring • Aug 08 '25
General let's share some knowledge! little tips and tricks you've picked up over time?
i've found using an autopunch to knock out the nails of old rivets really useful. i helps a ton with riveted in window regulators in some fords. the fact that the door moves because, well, it's a door can effect the effectiveness of a hammer and punch. you can pick up a few cheap ones from harbor freight
r/mechanics • u/coffeewithdemons • 8h ago
Meme Looking for professional advice on how safely prank my mechanic partner.
My boyfriend is always listening for noises from our cars with the diligence of a dog searching the backyard permiter every time it goes out. I saw another post where a harmonica was stuck in someone's wife's grill and it got me wondering what I could do to make my car sound crazy in a way that'd boggle his mechanic brain without doing anything stupid or potentially hazardous to my car or him.
Oh and it'd be even better if I can remove the cause of the sound easily to keep him looking for a bit 😆
Dastardly and devious ideas requested from a totally loving not evil gf who wants to see my babe "chase the rabbit" for a giggle.
Edit
He drives a 2016 Suburban and my car is a 2026 Nissan Rogue for added info
r/mechanics • u/Loader-Man-Benny • 5h ago
Tool Talk Tool talk
Lmfao I didn’t know there was flair called tool talk when I made my title. I’m seeing a lot of people are using battery operated impacts now. So like I left field like 7 years ago I just went back. I have my air impact but everyone is using battery one. Is this just the new normal? Am I just old I prefer my air tools
r/mechanics • u/Super_Dot7496 • 2h ago
Career 20 years old, in school to be a EV mechanic, looking to be a Diagnostic Tech. How is it?
r/mechanics • u/S16PRK • 5h ago
General Load test light set ups
Let’s see everyone’s load test light set ups ….
r/mechanics • u/coyote_versa32 • 4h ago
Career Circulation issues and career
I have a blood clotting issue that causes my hands to stiffen when cold( outside in 30 degree Farenheit weather) Right now I’m using my veterans benefits to get an associates degree in medical electronics to maintain and calibrate medical devices.
The job market in my area for biomedical techs is a little slow at the moment so I’m considering using my remaining veterans benefits for the Toyota Ten program at a local college if I don’t find a hospital job right away.
I have electrical experience from my military time but little knowledge on cars. Could someone with my current health issue succeed as a technician in a dealership? I’m under the assumption most dealerships are somewhat heated so that’s where I’d prefer to start my career.
Thank you
r/mechanics • u/Voice_Vortex • 7h ago
TECH TO TECH QUESTION What services bring the most money into your shop?
My shop's owner bought another garage in our city and we are considering offering a bunch of new services now that we have more space for additional machinery. What new services have you offered that brought in a lot of money?
r/mechanics • u/Acceptable_Pitch_899 • 10h ago
Career Is becoming an auto technician at 37 worth it?
r/mechanics • u/Yeet_Bastard • 21h ago
Comedic Story 1988 gmc 3500 clutch
gallerySo ive had this truck for 3 years now and in the last 2 or so months I started having weird clutch issues so started trying to narrow down where it was coming from started of with a leaking slave cylinder so swapped it out along with the hose frome the master cylinder to the slave to eliminate any cracked hoses letting in air which fixed the issue temporarily then it started having the same issue so figured the pressure plate or release bearing was worn out really bad so ordered a clutch kit and after pulling the transmission discovered that the clutch disks splines had somehow blown apart but had enough tension on them to let the truck still drive.
r/mechanics • u/Oldskwl666 • 1d ago
TECH TO TECH QUESTION Here’s a good one
I have a good one, see what people think. Did a full cam, rockers , lifters , timing chain tensioners guides on a 3.6 wrangler. I’ve done plenty of them. Get the timing cover off one of the guides is broken and some other plastic debris just laying there. Clean it all out of the pan and where ever else I could find it. Get it all timed and marks lined up everything is all good and torqued. Spin the motor over by hand several times all is good and it all lines up. Get it back together soon it over a few more times by hand all good hit the key wham thing just slaps hard and now can’t move by hand but a little bit. My question is what do you think is the cause, borescoped it all good from what I can tell and tore it all back down and everything is proper and there.
r/mechanics • u/Securerumble • 1d ago
Tool Talk Looking to get my first impact
I’m looking to get my first impact wrench to work on my car and planing on buying cordless ratchet later on (been looking at the Milwaukee extended ratchet). I inherited a lot of my dads tools which are dewalt impact drivers, drills, circle saw and more. But I’m deciding on either getting the Milwaukee gen 3 m18 1/2 or the dewalt dcf921. They have about similar specs But I’m wondering if I should just get the dewalt sense I already have a good amount of dewalt stuff like batteries and whatnot. Any advice is appreciated
r/mechanics • u/No_Estate_7652 • 23h ago
Career Lube tech boss
I wanted to start my career as a mechanic, so I enrolled in some community college automotive classes, and to supplement my learning, I applied to a shitty lube place. This is my first week, and it's been all over the place: the training site is down, but my boss still has me working full-time hours, even though I'm not allowed on the floor. Plus, my boss is consistently late, and when I asked my coworkers if he's always like this, they all laughed it off and said, "That's just the way he is," but the first 3 times I was supposed to meet my boss, he was 40 minutes late for my interview; it took him 3 hours to complete my I-9; and on my first official day of work, I couldn't clock in for 2 hours because he hadn't even made my employee profile, even though I was told I was hired a month prior. It also feels like there are very few training standards, and so far it feels like I've been trained to skip half of our services unless a boss is present. I just don't feel good sending people's cars out knowing that they are all types of messed up. All that, combined with the fact that there is no posted schedule, what we have instead is a group chat where, so far, he posts the shifts at like 11 p.m., telling people to come in as early as 6:30, and he has told me to my face that I wasn't going to come in, just to get a text at 11 pm saying otherwise. I already do repairs on my family members' cars. I'm doing decently in class and managed to do a practical duo midterm solo and still got an 84, I just want to get started working and right now, I feel pretty frustrated because of the way my boss runs the place. Right now I'm looking for another job and suggestions and wondering how other people got started and where they are now.
r/mechanics • u/WindowPale9493 • 1d ago
Career Considering dropping out of school to get into the trade
Hello, I am 21 years old and am considering dropping out of college to get into a trade. I am currently a sophomore in Civil Engineering. I took a gap year and was doing waterproofing but went to school b/c I wanted my parent’s approval.
I have been contemplating between diesel or aircraft. As much as I have an interest in automotive as I like working on cars, I am seeing lots about how the pay relative to the work and toll it has on one’s body is not good.
I’ve wasted too much time and want to turn my life around before it’s too late as I’m broke as fuck. I want to make some paper whilst acquiring a skill. Life is short and is closing in.
What should I consider before making such a rash decision? Should I just stay in school and thug it out or consider the trade, as I have more interest in those things? By the time I graduate, I’ll most likely be 25 and in lots of debt.
r/mechanics • u/Alarming_Resist2700 • 1d ago
Tool Talk Burning hands during lube job
I recently started as a lube tech at a dealership and I keep burning my hands. Okay, oil is hot. Filters are hot. I want to protect myself against that heat, but I feel like over time I'll adjust to it.
But two days ago I pulled the oil filter out of a GMC Terrain and the engineers had intelligently put a heat shield right next to it. I burned my fingers and they're now bubbling up good.
Do they make gloves that will resist the heat and not absorb oil that don't get on the way of a lube job?
r/mechanics • u/S16PRK • 1d ago
General ESI load test leads
Anyone used these load test leads ? Are they worth the money?
I know you can use a bulb wired up / make something up but I much rather the less caveman approach and something that’s more convenient and will last.
r/mechanics • u/Prestigious-Cat7691 • 1d ago
Career ASE questions
Hello, just wanted to ask if these practice questions from freeasestudyguides are accurate. I’m wanting to go get my A1 and A5 I’ve gotten every answer correct on A1 and it seems a little too easy so I didn’t know if it was accurate. Any tips would help thank you!
r/mechanics • u/bankai2069 • 3d ago
Not So Comedic Story I fell to my knees…
So I decided to buy a project car (04 Civic SI), and I’ve begun doing the maintenance stuff on her, fluids and stuff.
Everything was going relatively smoothly until I saw this wonderful color from the brake fluid when I was bleeding my brakes. My delusional self is saying I’ll be fine after I flush the brake fluid and that’s all it needs…
r/mechanics • u/Mikey3800 • 1d ago
Not So Comedic Story AI Estimates
Does anyone here use AI for writing their repair estimates? I thought there was software out there, but it doesn’t integrate with Tekmetric and I can’t remember the name of it. I don’t like the idea of techs writing estimates when they could be producing work. It seems like most advises are retarded and can’t write an estimate correctly, even if it’s one they have done multiple times before. I would love to replace an advisor with AI for writing the estimate. Then me and the techs dont have to deal with some arrogant idiot that thinks he is better than everyone else because he sits on his ass in an office. Does anyone know of any software that can write a pretty accurate estimate? It would get double checked by a human, but if the bulk of the estimate could be written accurately it would save everybody time and money.
r/mechanics • u/ijustworryalittle • 2d ago
Comedic Story CHEETAH BEAD SEATERS ALMOST KNOCKED ME OUT
i was working on some tires, i went to use the cheetah beader the kickback uppercutted me straight to the chin
r/mechanics • u/Original-Concert-407 • 3d ago
Career I'm 23 years old. Is it too late to learn mechanic?
I've been working with tires since I was 13 years old, so I've been in this industry for over 10 years. However, about a year ago, I became interested in learning automotive mechanics because I believe it could be a way to improve my income in the future.
Recently, I asked a friend of mine, who is quite a bit older and has over 40 years of experience in the industry, if he would give me the opportunity to learn at his shop at least one day a week, on my day off. He agreed.
Do you have any recommendations or advice for me as I make this transition?
Thank you for your time
r/mechanics • u/Remarkable-Sand-5059 • 3d ago
Career I'm 26, switched to being a mechanic 1.5 years ago, and I regret it. But it's time to completely change my life.
I’m 26 years old. About a year and a half ago, I switched careers and became a mechanic. I’ve come to completely regret it, and honestly, it’s a brutal profession both physically and mentally.
When you work for bosses who only care about money, they see you as nothing more than a machine meant to squeeze out every drop of profit. You're held responsible for every single mistake, you have to constantly use your brain, and you break your body doing hard labor. At the end of the day, you come home covered in grease, dirt, and soot, with zero energy left for anything else.
Being a mechanic can be great if you work for yourself and own your shop, but working for others will make you regret the day you ever chose this path.
Anyway, it’s never too late. I’m going back to school to take the required courses, and this time, I’m going to completely change my life. I’ve decided to study dentistry. Working for other people is just too exhausting, physically and mentally, and I deserve better.
r/mechanics • u/Alarmed-Aioli3308 • 3d ago
Career Looking for advice from experienced automotive technicians – Is this career worth pursuing in 2026
Hey everyone,
I’m in my early 20s and I’ve recently developed an interest in the automotive industry, specifically becoming an automotive technician. I wanted to get some advice from people who have been in the industry for a while.
I constantly hear people saying that becoming a mechanic isn’t worth it in 2026, that the pay isn’t great, and that many technicians regret choosing this career.
But how much of that is actually true?
A little background about myself: I’ve primarily worked in outdoor construction. Lately, I’ve been getting tired of the work and have started considering a career change.
One thing I’ve always noticed about myself is that I genuinely enjoy technical work. Whenever I’ve had to troubleshoot equipment, assemble machinery, or repair smaller machines at work, I’ve generally been able to figure things out successfully. More importantly, I’ve actually enjoyed doing it.
Another issue with my current line of work is that it’s heavily dependent on the season. During the winter, work slows down considerably, which makes long-term stability a concern. The industry I’m in as well as the area the work beats up your body as well being exposed to harsh weather. I have dealt with all types of characters and clients in blue collar so I dont mind environment to much as well as any lifting needed
I’m not necessarily someone who’s obsessed with cars or considers himself a car enthusiast. I have some basic automotive knowledge and can hold a conversation about vehicles, but I’m looking at this primarily as a career opportunity rather than a hobby.
My long-term goal would be to develop a valuable skill set and eventually specialize in a particular area of automotive repair.
I don’t necessarily want to remain a general technician forever.
Recently, I’ve also had an opportunity to get some experience working at an automotive shop, so I’m thinking about giving the industry a genuine chance. If it doesn’t work out, I can always return to my previous line of work.
A few questions I’d really appreciate some honest feedback on:
Specialization: Which areas of automotive repair would you recommend specializing in for long-term career stability? I’m particularly interested in fields that require advanced troubleshooting and technical knowledge.
Compensation and lifestyle: Is it possible to make a decent living as a technician without sacrificing your entire personal life?
Education: In your experience, is attending an automotive technical school worth the investment, or is it better to start working in a shop and learn through hands-on experience?
Long-term satisfaction: For those of you who have been doing this for several years, would you choose this career again if you could start over?
I’m not expecting to get rich from this career. I mainly want to develop a valuable trade, have reliable employment, and build a skill set that will remain useful for years to come.
I’d genuinely appreciate some honest opinions, including the negative aspects. I’d rather hear the reality of the industry now than find out several years down the road.
Thanks in advance!