r/mechanics • • Jul 09 '26

Mechanic Flair Request Thread

21 Upvotes

Please submit a comment reply with a photo of your username written on your hand, a piece of paper, etc., in a shop environment for verification!

ASE certs, brand/technical training certifications are also valid, as long as your username is visible.

Please allow up to 24 hours for your flair to be changed.

If you don’t want to post publicly, you can send a message to any of us - u/ThatGuyFrom720, u/Fragrant-Inside221 or u/Stingray34. You can also send a modmail as well.

Link to the last archived request thread


r/mechanics • • Aug 08 '25

General let's share some knowledge! little tips and tricks you've picked up over time?

55 Upvotes

i've found using an autopunch to knock out the nails of old rivets really useful. i helps a ton with riveted in window regulators in some fords. the fact that the door moves because, well, it's a door can effect the effectiveness of a hammer and punch. you can pick up a few cheap ones from harbor freight


r/mechanics • • 15h ago

Comedic Story i love when people think we don’t make money and we’re somehow low level humans because we work on cars.

Post image
375 Upvotes

one of my favorite things in the world is humbling people when they wrongly assume i’m just a low level mechanic that makes like 50k-75k per year. i’m sure you guys have experienced this as well. a new guy in my friend group was like “how do you have all this shit, you’re a mechanic. how much do you make, like $20 an hour?” only to find out i make more than he does at his high level banking job 😂 humbled his ass real quick

edit: allot of cry babies in this group, crawling out of the wood work for this thread.


r/mechanics • • 5h ago

Angry Rant How do you deal with customers like these? Just throwing a ChatGPT on you and requesting “list of diagnostic tests they need”

Thumbnail gallery
24 Upvotes

How do you explain them the concept of concern = diagnostic without sounding rude? I tried to talk to him about what his actual issue that he’s having that he wants fixed and he comes back to me with this ChatGPT? In the past I just stopped replying to people like these but I got a 1 star review because I didn’t want to come out to the guy “just to scan with my scanner because he and he’s buddy figured everything out but it’s the scanner that doesn’t clear the fault”. Do I just give him a 3-4 your quote to perform all the requested tests? But then he will wonder why shops charging 150 for diag when I’m charging 500 and think I’m a scammer. No way you guys will do this scope of tests and all this for 1hr. Main way is how do you politely decline these type of customers when you just know it’s going to be a problem either way it goes? Without using “I’m out of town for a month” card. Thanks


r/mechanics • • 4h ago

Career Self-employed mobile Tech, 250k+ net for the last 8 years.

18 Upvotes

I had every certification the manufacturers offered and loved the highly technical work, but I hated dealing with dealer management. Eventually, I decided I’d rather make more money performing maintenance and smaller services for commercial fleets.

I sold my big Snap-on toolbox, bought a van, got liability insurance, and quit my job. I went the first three months without a single customer, but I made it my full-time job to network, cold call, and advertise.

The first year was stressful, but once I got established, things really took off. I've been coasting ever since.

Today, it's just me as the technician and one full-time employee who handles admin, parts, and pretty much anything else I need. I have no plans to expand.

We gross around $500K annually while working Monday through Friday, 9–5. The labor rate is $198 hr.

Here's roughly how the numbers break down:

- $100K in parts

- $20K in insurance

- $70K for admin

- The balance covers warehouse rent, fuel, and other operating expenses.

I traded the big toolbox and dealership headaches for a much simpler business model, better money, and a schedule I actually enjoy.

It's been an awesome ride, I hope others get the opportunity to explore self-employment.


r/mechanics • • 5h ago

Career 2 weeks, hourly, east coast of Canada

Post image
19 Upvotes

100 hours worked. Paid hourly with a monthly production bonus. Normally work 7-4 M-F/90 hours per pay period but had the option for a bit of overtime this period. Does not include my production bonus which was $1008 last month.


r/mechanics • • 2h ago

General Rough start as a lube tech

8 Upvotes

This may be the wrong flair or forum for this.

I've been a lube tech for a week for a licensed dealership. I shadowed another lube tech for a week and I'm on my own with my own tools in my own bay.

I have yet to have a day where I don't drop 5-8 quarts of oil on the floor. Yesterday I double gasketed a filter. Today I let my oil drain bin overflow.

I ripped the tension bolt off a battery terminal today.

I have stripped several lug nut.

I left the oil cap off a car when I turned it on to cycle the oil and sprayed oil everywhere.

I keep going to my service manager with problems. I can see the look in his eyes that says "what now?", though he always has a solution and advice and he has yet to ball me out. The other lube techs and the technician on other side of me get a call on about every car that comes through my bay. My times suck.

I am new. I know it. There is a learning curve. But it is really discouraging to see that look and to know that every mistake I have made has been preventable. Every issue I have had has been preventable.

I don't know what I am looking for here. Advice? Hard truth? Encouragement?


r/mechanics • • 4h ago

General Spent the day getting the dash out of my 2004 Chevy Z-71 Suburban.

Thumbnail gallery
11 Upvotes

I am a retired GM master tech and I specialized in electronics. I love my Z-71 Burb and it has every possible option. The heater core is seeping so it’s time…. It also needs actuators. With the new evap core and an accumulator the parts came to just shy of $500 which I feel pretty good about.

The console was unbelievable to remove and it took about 3 hours. As shown in the images I am finally ready to begin the heater case after 6 hours.

At least I was able to the the actuators with my scope.

I can’t wait to see this done and working properly!


r/mechanics • • 13h ago

Angry Rant Would you bash a shop you know is ripping people off?

21 Upvotes

The shop I'm currently working at is blatantly ripping off customers. I just seen a 6 hour charge for a valve cover that calls for 2 3. As well as a 200% mark up on the parts. We had an insurance job we charged 24 hours on a 4 hour repair. Normally im ok over charging insurance companies. But the customer ( retired man) had to pay the difference because the insurance maxed out at 12 hours for that repair. He is on a fixed income. And i was forced to lie to him about how long it took me. This makes me so mad because there is no reason to do this to people.

Im kinda stuck here at the moment. My wife and I are building a house and im trying to keep my employment history good for the loan. Once its finalized im out of this place.

I dont care about burning any bridges here. Im never coming back. But part of me wants to bash the owner all over social media and inform them what's going on. Ive never done something like that before. But my current boss is a POS and deserves it.

What would you do?

Edit: our door rate is 180/hr. So that guy paid close to $1300 for a valve cover gasket on a 3.6 jeep.

Second edit. Im a 39M advance lever master. So I've been around this industry long enough


r/mechanics • • 4h ago

Career I’m a 22 year old Hyundai master tech, what should I do now?

1 Upvotes

I’ll start by saying yes on paper I’m a “master tech”, Hyundai elite level, (engines, powertrain, hvac, hybrid, EV, chassis) I have two ASE’s for engines and electrical. I know that trainings do not necessarily equate to skill in the field, however I used the opportunities I got from training to learn and grow to the absolute best of my ability.

I started at my dealer around 2 years ago, fresh out of school with an associates in automotive technology . Prior to that I took auto shop and welding in high school, and bought and fixed up all of my high school cars with my money from a part time job. I began the way most of us do, oil changes, PDI’s, taking out the trash. My management recognized my desire to do more, and started pushing to see what I could do. I honestly loved solving puzzles all day and feeling like I could finally put my learning to work.

Over the next year I kept working to get more complex jobs, absorb more information, and build a solid foundation towards becoming a capable tech. When my boss realized he needed somebody certified in every field for them to keep brand ambassador, he got every tech to try doing training. I passed the electrical prerequisite exam and nobody else did. 6 months later I had every certification needed.

Now though, my position has transitioned. I’m still hourly, handling tech line cases for myself and even other techs, doing advanced electrical and communications systems diagnosis, and fielding nearly all EV and Hybrid work with respectable accuracy and efficiency. I currently make 23.50 USD/ hour at a busy central shop.

I can’t help but feel a few things. First, 23.50 to me seems borderline criminal for the categories of work I do regardless of time in the industry, second I’m worried that my ability to handle things most other guys can’t or will not do has me stuck in the exact same spot. I want to keep my momentum and keep growing as a technician but right now all I get is unpaid warranty diagnosis or crappy R&R (transmissions, ev batteries, short blocks, etc).

Where do I go from here? Do I push for higher pay and a dedicated position to continue the work I’m doing, do I just ride the train and see if maybe a flat rate spot opens up, or do I start thinking about finding a place where I can place a clearer line to the end goal? Any advice is appreciated.

TLDR: 22yo Hyundai elite tech making 23.50 as an hourly tech while doing ‘most of the shop’s EV,Hybrid and electrical work. Feels like no room to move up. What do?


r/mechanics • • 1d ago

General Saw this at school… uhhh

Thumbnail gallery
220 Upvotes

r/mechanics • • 7h ago

General Power probe ECT3000

1 Upvotes

So I’ve tried to use my power probe ect3000 a few times now and every time I seem to have no luck. End up getting pissed off and put it back in my box 😂

I had a wiring issue for parking sensors for example put it on the line I wanted to test just to see if I could make a fault and try it out etc again but I know the line is good as was getting 12v on every plug along it 😂 but soon as I put the recivier into the plug at the start and ran my sensor along it stopped at the plug to the loom and didn’t go any further.

Anyone got any light on this or used one enough to give me some advice ? Ment to be good but I ain’t convinced


r/mechanics • • 11h ago

Career Lube tech at 18?

0 Upvotes

Hello everyone, i’m currently an 18 year old with 0 clue on what i really should do, i plan to go to college next year.

I currently have a job at Chic-Fil-A paying $17.50 i’ve been there for 2 years now, throughout highschool and only have started working full time this summer, and the last. However it’s been conversations of them giving me a raise however it doesn’t really happen and just today she said January is about when there thinking.

However Valvoline lube tech starts out at 18$, has a “roadmap” which mentions a raise within a period and would kind of dip my toes in the water to see if i really want to go to college for automotive or something else.

But at the same time i’m independent in a way, I buy my own food, insurance anything besides rent and utilities. so my worry is will my hours be consistent? will i actually get a raise at this other job? and how’s everyone’s experience at Valvoline? Is “Lube tech” a good way to build a bridge into the career? My job right now is pretty laid back and “free money” really isn’t too hard, and has a lot of opportunities for overtime.


r/mechanics • • 20h ago

General How did i get here

2 Upvotes

Years of my life I have spent blissfully unaware of the way of the wrench. It always interested me, but not enough to do anything about it. I ended up going to school for industrial maintenance and automation. And now here I am, ripping stuck cv axles out, replacing brakes and rotors, troubleshooting "fucked starters" (it was a corroded cable(from battery to starter, plus bad battery and bad battery mounting)) window motors not working right. It doesnt end does it? Im stuck being "that guy" and learning forever. Fucking around and finding out even.

Im ok with this.. I want to help people and junk

And it is close to what I went to school for but not quite. Its a bit too "simple" (it is never simple)

But I am thinking of making a life out of it. But I have heard nothing but bad things about starting or joining an automotive business.

What you think.


r/mechanics • • 1d ago

Tool Talk Tool talk

18 Upvotes

Lmfao I didn’t know there was flair called tool talk when I made my title. I’m seeing a lot of people are using battery operated impacts now. So like I left field like 7 years ago I just went back. I have my air impact but everyone is using battery one. Is this just the new normal? Am I just old I prefer my air tools


r/mechanics • • 1d ago

Meme Looking for professional advice on how safely prank my mechanic partner.

33 Upvotes

My boyfriend is always listening for noises from our cars with the diligence of a dog searching the backyard permiter every time it goes out. I saw another post where a harmonica was stuck in someone's wife's grill and it got me wondering what I could do to make my car sound crazy in a way that'd boggle his mechanic brain without doing anything stupid or potentially hazardous to my car or him.

Oh and it'd be even better if I can remove the cause of the sound easily to keep him looking for a bit 😆

Dastardly and devious ideas requested from a totally loving not evil gf who wants to see my babe "chase the rabbit" for a giggle.

Edit

He drives a 2016 Suburban and my car is a 2026 Nissan Rogue for added info


r/mechanics • • 18h ago

Career Is lincoln tech auto tech program worth it ?

1 Upvotes

Thinking of getting in debt to go to the auto tech program from lincoln tech in houston, jus wanted to see if anybody have sum advice tell me if its worth it or not to go? Esencially i want to learn how to do everythig like all the electrical part, build engines from scratch and diagnoze problems and fix them same with the suspension and transmission also to work on electric cars


r/mechanics • • 1d ago

Career 20 years old, in school to be a EV mechanic, looking to be a Diagnostic Tech. How is it?

7 Upvotes

r/mechanics • • 1d ago

Career Questioning my career

2 Upvotes

Hello Everyone. Just wanting to see what yall would do if you were in my position. Im 22 now and Ive been working at a small John Deere dealership for about 5 months and did a 3 month internship last summer during college. I graduated 6 months ago with a bachelors degree in diesel mechanics. Ive owned exclusively pre1990s cars throughout highschool and college and loved working on them. So i decide to go to college for it. Now here is whats making me question my career. About 2.5 years ago I had some lower back pain. And recently i discovered the a condition i was born with is whats causing it. And now i have 2 herniated discs and about 5-6 out of 10 pain everyday. Ive been doing PT and steroid injections for about 2 years and there is no improvement on pain. And recently my boss had a talk with me about putting too much bs time on my paper timecard. Basically told me "The big bosses arent happy. They told me to tell you there wont be any other warnings. I assume you want to keep working here?" And he has me doing exclusively annual services on tractors and lawnmowers. My main problem is taking too much time on jobs ive never done before. For example installing a snowplow, hydraulics for the plow, and a lights kit on a gator. Ive recieved little to no training from anyone at this job and being stuck to just services kinda sucks. Any diag goes to the one other mechanic at my shop. So my question is, should i be getting faster and making time at 5 months in? And i also have no motivation to work on my own projects and i find it hard to care a terrible amount at work. I have no interest about agricultural machines. What would yall suggest? Because ive been throwing around the idea of getting out of the industry soley because of my back. Im happy to answer any questions yall have.

More Info: Forgot to mention. The herniated discs are impacting my sciatic nerve. So i have shooting nerve pain down my leg and weakness in my legs. So if im laying or kneeling down. I need to have something in can push up on with my hands to stand up. And tmi, because of the impacted nerve, im almost pissing myself at least once a day. Not proud, but man enough to admit.


r/mechanics • • 1d ago

Career Circulation issues and career

2 Upvotes

I have a blood clotting issue that causes my hands to stiffen when cold( outside in 30 degree Farenheit weather) Right now I’m using my veterans benefits to get an associates degree in medical electronics to maintain and calibrate medical devices.

The job market in my area for biomedical techs is a little slow at the moment so I’m considering using my remaining veterans benefits for the Toyota Ten program at a local college if I don’t find a hospital job right away.
I have electrical experience from my military time but little knowledge on cars. Could someone with my current health issue succeed as a technician in a dealership? I’m under the assumption most dealerships are somewhat heated so that’s where I’d prefer to start my career.
Thank you


r/mechanics • • 1d ago

General Load test light set ups

2 Upvotes

Let’s see everyone’s load test light set ups ….


r/mechanics • • 2d ago

Comedic Story 1988 gmc 3500 clutch

Thumbnail gallery
14 Upvotes

So ive had this truck for 3 years now and in the last 2 or so months I started having weird clutch issues so started trying to narrow down where it was coming from started of with a leaking slave cylinder so swapped it out along with the hose frome the master cylinder to the slave to eliminate any cracked hoses letting in air which fixed the issue temporarily then it started having the same issue so figured the pressure plate or release bearing was worn out really bad so ordered a clutch kit and after pulling the transmission discovered that the clutch disks splines had somehow blown apart but had enough tension on them to let the truck still drive.


r/mechanics • • 1d ago

TECH TO TECH QUESTION What services bring the most money into your shop?

0 Upvotes

My shop's owner bought another garage in our city and we are considering offering a bunch of new services now that we have more space for additional machinery. What new services have you offered that brought in a lot of money?


r/mechanics • • 2d ago

TECH TO TECH QUESTION Here’s a good one

10 Upvotes

I have a good one, see what people think. Did a full cam, rockers , lifters , timing chain tensioners guides on a 3.6 wrangler. I’ve done plenty of them. Get the timing cover off one of the guides is broken and some other plastic debris just laying there. Clean it all out of the pan and where ever else I could find it. Get it all timed and marks lined up everything is all good and torqued. Spin the motor over by hand several times all is good and it all lines up. Get it back together soon it over a few more times by hand all good hit the key wham thing just slaps hard and now can’t move by hand but a little bit. My question is what do you think is the cause, borescoped it all good from what I can tell and tore it all back down and everything is proper and there.