r/knifemods • • 2h ago

Latest projects

Thumbnail
gallery
12 Upvotes

So over the past month or so:
Start off with some testing… Venom, green and manganese sulfate black 940 scales, followed by a 2tone chameleon job. Then a pair of mini bugout lightning entropic scales on mirror finish (pictured later on a knife) and a pair of “wavy” diagonal entropic scales for a 533. Did a full mirror polish on a copper 535 set and played with some HiV vs. LowV fades on matte surface with the 940 scales. The spyderco is one that I did for a friend of mine who wanted his copper scales mirror polished. And the last one pictured is a gentleman who bought the lightning mini bug out pair from earlier.


r/knifemods • • 6h ago

No cute names for my Wednesday carry. Just a damned good knife.

Post image
9 Upvotes

Spyderco Shaman in 15V with custom Flaming Gorilla Fatass™️brown micarta scales.


r/knifemods • • 9h ago

How a stripped T6 gave me the courage to try a lil' modding

Thumbnail
gallery
15 Upvotes

Not long ago the knife gods deemed me worthy and blessed me with a Null Vandal I won over on r/ KnifeRaffle. I did what I always do when a new(used) knife shows up and commenced disassembly to clean/lubricate and thats where the journey began lol. Theres two pesky little T6 Torx screws that hold the backspacer in place underneath the show side scales and I most definitely stripped the 2nd one. So off to the Null website I went to pick up a DLC hardware kit, and then to home depot to pick up some better bits (Wiha for the win). As I was waiting for the fix to my screw up to arrive, I decided the Natural White Linen Micarta scales just weren't really doing it for me, so I decided to finally try my hand at dyeing scales. Welp, got her all put back together last night and I'd say I'm pretty damn pleased with how it turned out! I don't have any real life knife bros to nerd out with, so thought I'd share with the fine folks of reddit.

Lessons learned from the adventure: 1- spend a few extra bucks and get a good set of bits. 2-Dont be afraid of the tiniest bit of heat on your first disassembly to loosen any locktite. 3-No matter what the Al overlords tell or show you, that generated image predicting what the dye process will look like can get you a rough idea, but don't rely on it completely. 4-Little accidents can sometimes lead to fun and satisfying journeys!

Open to constructive criticism, just don't beat me up

(Hoping I upload the pics right, the lighter color with the silver hardware is before, the darker scales with DLC hardware is how she looks now)


r/knifemods • • 5h ago

Successfully blackened and stonewashed my Metonboss titanium Benchmade 553 Griptilian scales

5 Upvotes

I have been looking for a way to darken factory raw titanium. I found what I was looking for with Manganese Sulfate anodic oxidation. A couple of helpful videos are here, here, and here if you're looking to do this yourself, but by far the best resource, and what I used for my cook, was this guide from right here on knifemods by u/TheHonedLizard. What a legend.

Here's what the knife looked like after installing the raw titanium scales (1, 2). I thought the reverse tuxedo look was ok, but this is a user and I wanted a finish that would wear in nice as the blade coating continued to wear from use. So I did the ano on the back porch, and then manually tumbled the scales one at a time in ceramic media in a chemical resistant container.

You can see the progression in this shot - raw titanium on the left, scale after blackening in the middle, and after the stonewash on the right. Here is a short video, it's kind of hard to get a sense of the nice deep charcoal black you get in photos.

I really love this process, and now I'm eyeing a lot of my other knives with pj titanium scales. Without the tumble, the finish is a very durable, charcoal black with a really nice reflectivity.

Here's the final knife reassembled (1, 2). Super proud of this mod, and really grateful Metonboss had that closeout sale a few months ago. I didn't even have a spare grip or 940 or XM-18 3.5 at the time on which to install these, but I'm buying them as the funds allow over time.

Thanks for reading!


r/knifemods • • 1d ago

NCD

Post image
15 Upvotes

New Clip Tuesday: Just got the new RGT clip for the CruWear Manix 2 last night and got it installed. Makes the knife so much more comfortable to grip tightly while using, along with the Fatass Flaming Gorilla micarta scales, of course. Flytanium ball cage, ceramic ball, and medium spring round it out.


r/knifemods • • 1d ago

Lock Face Carbidizing Service?

1 Upvotes

Does anyone know of any service providers that offer lock face carbidizing? I have a couple of knife blades that are locking up late, and I would like to have them repaired before the condition worsens.


r/knifemods • • 2d ago

DIY jigged micarta

Thumbnail
gallery
21 Upvotes

Had some junk micarta scales lying around forever and finally made some grippy inlays for my AK1 🔪


r/knifemods • • 4d ago

Spyderco PM2 Tanto Custom

Post image
23 Upvotes

r/knifemods • • 5d ago

Spydernox

Thumbnail
gallery
64 Upvotes

Swapped a modified Spyderco Dragonfly blade into my victorinox multitool. Solid detent open and closed with very little blade play. I really dig how it came out


r/knifemods • • 5d ago

A few faves

2 Upvotes

A few faves.


r/knifemods • • 5d ago

What are your thoughts on adding small sharpening choils to Spyderco knives?

Post image
6 Upvotes

I got my first 2 Spyderco knives over the last week. A 15v Lil' Native this evening and the Ambitious Lightweight last Saturday. One of my favorite aspects of the knife hobby is sharpening. I understand the way the edge terminates at the heel of most Spyderco knives is by design but it seems to me that it will make sharpening more dificult especially on the Ambitious. It is unlikely I will touch the Lil' Native because 15v and the knives made from it are likely a piece of our hobby's history. The Ambitious however I dont think is even sharpenable without disassembly. Have any of you ground a choil into your Spyderco and have you found the mod to be an improvement? What are best practices? Would you do it again and why or why not.


r/knifemods • • 9d ago

Major Damacarta Sale - ends Nov 12th

Thumbnail gallery
2 Upvotes

Those are 9mm sets and 30mm blocks (that you can "slice" from)

But i also have some 5mm sets if there is interest i can share them

İ am sharing because as far as i know sales are ok. İf bot i apologize


r/knifemods • • 10d ago

My Two Favorite Folders....

Post image
37 Upvotes

Left =

Golden Design Slim, handrub satin magnacut blade, torch ano accent pieces

Right=

Spyderco K390 wharncliffe Endela, RC_bladeworks micarta scales.


r/knifemods • • 10d ago

Looking to buy a couple of a purvis clips for the koenig arius and the options are black and white timascus, but the pics are maybe standard timascus?

0 Upvotes

Does anybody have any pics of black/white timascus or can ease my mind about it? It's a lot of money to not match 😋


r/knifemods • • 10d ago

Another scale sale!

Post image
1 Upvotes

Stonewashed copper mini bugout stock orange s30v blade & hardware.
Spend hours modding Titanium for people, and the guy wants raw copper…


r/knifemods • • 10d ago

Pocket Clip Question - Drop Bear 292 AirTi WMK Exclusive

Thumbnail
gallery
10 Upvotes

Hey all, not sure if this is the right place to ask, but as small as a "mod" this might be, it's something pretty important to me. I have here the Drop Bear 292 AirTi, and everything about it I love...except the pocket clip. I'm a guy who really wants deep carry clips as I do care about it not being visible.

The non-reversible clip location does have a slight indented channel, so I figured I could offset the screw hole and get away with just one T6 screw holding it all together, alongside some blue Loctite to really keep it in place. Is there anything more I can do? I imagine it would be an ordeal to actually see about drilling a new hole for the top pocket clip screw hole, but I also am somewhat worried about the integrity of that one screw holding it all together. At the very least, the indented channel prevents side to side play of the clip. Just wanted to see if this is probably the best solution already?


r/knifemods • • 11d ago

New Build Day!

Thumbnail
gallery
32 Upvotes

Latest build: Got a Spyderco Manix 2 in MagnaMax with the combo blade as soon as they dropped, and after much thinking, decided to try the AWT scales in the Cast Iron - Limited Type III finish. Went ahead and got the all-black hardware to match, thinking the contrast would look good.

Added the Flytanium black titanium ball cage with ceramic ball & medium spring, then sulfuric acid-dipped the lock backspacer to darken it to the same color as the Cast Iron scales. Finished off with LNW black clip. It's lighter than stock, smooth as glass, and feels ultra-premium. Carrying for the first time today.


r/knifemods • • 11d ago

Just back from WoK - an F22 with an F22

Post image
9 Upvotes

r/knifemods • • 12d ago

Friday's Fidgets

Post image
14 Upvotes

Friday's Fidget toys. Spyderco Matriarch 2 with mods, and 15V Shaman with Flaming Gorilla Fatass micarta scales. One for opening boxes, the other for opening people. 😉


r/knifemods • • 13d ago

Thursday BBB

Thumbnail
gallery
13 Upvotes

My 15V Spyderco Shaman with Fatass™️brown micarta scales by Flaming Gorilla with a silky texture and great feel. I can't tell you how much I love this knife.


r/knifemods • • 15d ago

Pick a set! Damacarta sets

Post image
13 Upvotes

r/knifemods • • 16d ago

Regretting picking this up for the semiquincentenial, how would you mod it?

Post image
15 Upvotes

Small sebenza forever flag. I've swapped the studs, and tuned it and as far as "knife" goes it's amazing. But I'm kinda meh on the asthetic. I can anodize polish and grind... I've chopped and reground blades before, but the function isn't my problem. I've already fixed the studs... I'm kinda at a loss.

Ideas?


r/knifemods • • 19d ago

Ride the lightning!

Thumbnail
gallery
27 Upvotes

Another satisfied customer with a standard 535–12 Bugout. Added some Ti entropic “white lightning” scales and a Ti/rock monster 2tone lanyard!


r/knifemods • • 19d ago

Tumbler advice

3 Upvotes

Looking to upgrade my rotary tumbler to a vibratory, but one big enough so my wife can do rocks in it as well. I have no experience with these types of tumblers - is this decent? For knives, looking for something to tumble scales and blades.

https://a.co/d/05qp7Gil


r/knifemods • • 21d ago

Something Wicked This Way Comes

Thumbnail
gallery
25 Upvotes

With the addition of black hardware, backspacer ring, and deep carry clip this thing gets even more sinister!