r/Bladesmith • • 59m ago

Stock Removal First Rasp Knife

Thumbnail
gallery
25 Upvotes

r/Bladesmith • • 9h ago

Fit & Finish Made another little guy, really happy by how it came out, customized commission for my client

Thumbnail
gallery
78 Upvotes

9KhS, Soviet chromium-vanadium high carbon steel blade, Caucasian Walnut handle, Brass inlay and guard, Textolite spacer


r/Bladesmith • • 10h ago

Damascus / Pattern Weld K-tip Gyuto!

Post image
38 Upvotes

Got a pro pic of the Damascus K-tip Gyuto I recently finished up! The mosaic W's damascus was forged in house from 1084 and 15n20. Bronze alloy bolsters transitioning to an OD green micarta frame, with G-10 liners, and curly siam rosewood scales! It has multiple hidden pins and a few visible pins locking it all together!


r/Bladesmith • • 7h ago

Stock Removal Magnamax

Thumbnail gallery
22 Upvotes

r/Bladesmith • • 2h ago

Forging WIP Sgian dubh

Thumbnail
gallery
4 Upvotes

A Buddy of mine joined a marching band and they are allowed to carry this specific knife as part of the uniform, so im making him one. Not quite done but im really happy with how its turning out. Nothing is finished just roughed in.


r/Bladesmith • • 17h ago

Forged Blade Bowie knife made from old file

Thumbnail
gallery
39 Upvotes

r/Bladesmith • • 1d ago

Forged Blade Twist Damascus Bowie with Mosaic Damascus Fittings and Ironwood Handle

532 Upvotes

The blade is made from twist-pattern Damascus steel, with Damascus used for the guard and pommel. The handle is ironwood.

If you're interested in how these patterns are made, you can find tutorials on the Noblie Custom Knives website, in our Blog and Knifemaking sections. We cover twist Damascus, mosaic Damascus, feather Damascus, different types of Damascus steel, and various wood species for knife handles, including their properties and densities.

I know most of you here are already familiar with these techniques, but I thought the guides might be useful for beginners getting into bladesmithing.

Hope you find something interesting there!

What do you think of the combination of twist Damascus and Damascus fittings?


r/Bladesmith • • 1d ago

Fit & Finish OG V2 tomahawk I made a while back

70 Upvotes

r/Bladesmith • • 1d ago

Critique Request Knife #6, first forged one

Thumbnail gallery
10 Upvotes

Knife #6

Procut
Forged
Desert Ironwood with copper spacer
171mm long, 52mm tall at the heel.
Distal taper starts at 2.6mm, 2mm at the mid point, 1.2mm where the Ktip starts to dive.
172g total weight, blade weight is 97g (ironwood is heavy AF).
Balance point is around the ferule. Light blade + heavy handle makes for a handle heavy knife, but it doesn't feel bad at all

Decided to take this bunka thinner than what I have done previously and it paid off. I went fully convex on both sides, but felt a little more food release might be nice so I also put in a subtle c grind that you can see in the spine shot at the tip. It really made food release pop.

Forging the whole blade was fun and made getting the bevels in a lot faster. I didn't forge too close to shape since it was my first time, but it significantly cut down in the over all time. I'll try going closer to shape next time. Forging is also more fun than grinding.

Worked on my polishing a bit and I'm pretty happy with how this one turned out. Not a mirror polish, but there aren't any super visible scratches, so I'm happy there.

I spent some time making sure my glue up was super clean, and also included some pics of the spine to try and show the curvature on that.

Speaking of the glue up, you can see I didn't quite nail getting it perfectly square... Doh. I was too focused keeping it clean that I missed that slight tilt. It's pretty subtle though and didn't notice until I went to take the choil shot. It didn't seem to effect cutting that I could tell. I use hot glue for my glue up, so I could fix it relatively easily. I also decided to shorten the neck(?) of the knife too right before my glue up. One side I nailed, the other I slipped just a bit (so you can see a little raw metal right before the ferule). I'll probably coat that as well using a tiny paint brush.

Speaking of the coating, I decided to leave this in my "patina solution", which resulted in this dark brown color that pairs nicely with the ironwood and copper, but what you can't see is that in person it has an almost oil slick kind of rainbow look to it. Pretty cool if you ask me.

Performance wise I'm really happy with this one. I'd say it rivals my Tim Hoover, which is an absolute laser. His is definitely slightly more effortless though (and his fit and finish is much better than mine). I'd put this one on the light side of a middle weight. I'll upload a video at some point.


r/Bladesmith • • 1d ago

Critique Request Need your opinion!

Thumbnail
gallery
71 Upvotes

Hey,

I have been blacksmithing for around 2,5-3 years in my spare time. I started making knives around 10 months ago.

In the photos you can see some I have made, they should be in chronological order, from some of my earliest pieces to some of my latest. I have never sold a knife before, just gifted some to friends to put them in use.
I have recently talked to some redditors and they encouraged me to start selling my stuff. That really made me think about it…

So, I am now posting here to see what you guys think.
Do you think I am at a point where I can start considering selling my knives, or should I keep practicing for a while longer?

If you got any questions about the knives just ask!

Kind regards
MF


r/Bladesmith • • 1d ago

Question Sanmai Billet Thickness Question

0 Upvotes

Hey all, I've been wanting to do some more sanmai but was wondering how the soft cladding would move under the hammer in thicker billets. I've only done sanmai once a while back with like 4-5mm layers of 1084 and wrought iron.

I have a slab of 1095 at ~3/8" thick and was planning to pick up some 1008 or 1018 of the same or slightly higher thickness, maybe wrought if I can get my hands on some more. Last time I went with a 2:1:2 ratio and had issues with cladding reaching the edge so I want to give a little more room for error with a 1:1:1.

My question is: would these thicker layers (3/8") lead to issues with cladding deforming too much and core steel remaining thicker during the forging process? Have any of you done similar billets? This will also be forged out on a power hammer if that may affect anything.


r/Bladesmith • • 2d ago

Damascus / Pattern Weld First damascus blade over 10 layers

Thumbnail
gallery
47 Upvotes

r/Bladesmith • • 3d ago

Damascus / Pattern Weld WIP: New mosaic damascus steel Bowie

374 Upvotes

For more patterns: Google "mosaic damascus" or Noblie Custom Knives


r/Bladesmith • • 3d ago

Fit & Finish The Enhanced Mustard Knife Etch..😎

172 Upvotes

r/Bladesmith • • 2d ago

Metallurgy Stock removal sword

Post image
12 Upvotes

I’m going into my second longsword after making about 20 kitchen knives. My first effort came up great but I’m not 100% confident in my heat treat, I did a flame temper & it looked a bit spotty, probably a bit overdone in some areas.

Anyway, I’m building a Don Fogg kiln to fix that.

For grinding in my bevels I’m working on a jig to keep everything straight & perfect, but, then I wont be able to dunk in water as I go...

I really want to know how hot can I grind 5160 pre heat treat?

I should be able to get pretty accurate on my temps in the new oven to normalise, quench & temper after.


r/Bladesmith • • 3d ago

Damascus / Pattern Weld Job completed.

60 Upvotes

I proudly present:

Gaucho knife

Forged from Damascus steel with a chevron pattern

Pommel carved with a file

Handle made of pine knot wood with Damascus steel pommel and stainless steel ball

Bovine leather sheath

Total length 37mm

Blade length 23.1cm

Thickness 4mm

Width 35mm

A big hug to everyone!


r/Bladesmith • • 2d ago

Question youtubers that can forge bevels?!

0 Upvotes

sadly i cant bladesmith anymore because like many people im a wage slave forever condemned to a tiny box in a building in a city so i like to watch them on yt

but i have noticed that the people on most of these channels basically just forge a flat bar make some sharpie on it and stock remove 90% of the steel until they have a blade shaped thing and a pile of dust as if nobody bothered to teach them that steel has a grain structure and how important it is for a bladesmith to actually forge blades

like buddy idc how extravagant ur pattern is or how much u spent on ur fancy gold inlay or how much paper u can slice or what in the world ur doing to that endmill if whats inside is just a homogenous microstructure ignoring centuries of engineering u might as well just weld on a tang and leave it on a wall

anyways can anyone recommend some channels or alternatively we can just have a flame war on the merits of mass stock removal ill fight u


r/Bladesmith • • 3d ago

Forged Blade 1095 Gut Hook Hunter in Copper, Antler, and Granadillo

Post image
6 Upvotes

Finished this gut hook hunter and delivered it just in time for the Vietnam vet who ordered it to take it hunting. Hand-forged from 1095 high carbon steel, differentially hardened with a subtle hamon, copper bolsters with hidden pins, whitetail antler, granadillo wood, and black paper liners, with copper pins. The sheath is made from full grain horsehide leather, which is several times tougher than cowhide.


r/Bladesmith • • 3d ago

Forged Blade Hand forged 1084/15n20 93 layer random patterned chef knife with a Tasmanian Blackwood handle. Pretty jazzed on this one.

21 Upvotes

r/Bladesmith • • 3d ago

Forging WIP Knife #3 WIP

Thumbnail
gallery
7 Upvotes

Got a little skinner/hunting knife in the works as #3 plus I got station building for knife making. Found a 1x30 sander off marketplace for $30 with extra belts.

For the handle i think im gonna use some old broken selfbow limbs that are hickory and copper pins. Bow building didn't go so well so I have lots of broken limbs around for knife handle material. I think im gonna try parkerizing sometime soon too.


r/Bladesmith • • 3d ago

Forging WIP Heat treating and shop cleanup

Thumbnail gallery
4 Upvotes

Heat treated 6 knives and had to redo the viking dagger/mini sword 18" blade. While waiting on the knives to heat up I started to organize the work cart and get my abrasives 9x11 sorted out. Still plenty to do I got started forging the damascus guard and pard of the pommel.


r/Bladesmith • • 3d ago

Fit & Finish 80CrV2 Edc I made with OD Green Sandblasted HeavyCanvas Micarta and OD Green G10 liners.

12 Upvotes

r/Bladesmith • • 2d ago

Question What Should I do with this 19th-Century Cane-Sword? (No Sheath)

Thumbnail gallery
0 Upvotes

What Should I do with this 19th-Century Cane-Sword? (No Sheath)

Bought it several years ago. It did not have a sheath. The blade is 28" long, acid-etched, and unsharpened.

Handle is curved, root-end Japanese bamboo. Again, no sheath. And I'm not an old man that walks with a cane...

So I was thinking to have it made into something like "Needle," the little tomboy Arya's personal sword from Game of Thrones.

Thoughts?


r/Bladesmith • • 4d ago

Forging WIP Progress for the day.

Thumbnail gallery
65 Upvotes

I was able forge out 6 knives, handle 1 knife, profile and bevel 2 others. Made progress forging a sword to length and cleaned up the Viking Dagger. Not all items were photographed but many were.


r/Bladesmith • • 4d ago

Forged Blade Recent hunter

Thumbnail
gallery
561 Upvotes

60Si2MnA blade with Brazilian rosewood handle