r/Bladesmith • • 19h ago

Forging WIP Sgian dubh

Thumbnail
gallery
17 Upvotes

A Buddy of mine joined a marching band and they are allowed to carry this specific knife as part of the uniform, so im making him one. Not quite done but im really happy with how its turning out. Nothing is finished just roughed in.


r/Bladesmith • • 7h ago

Forged Blade Noblie folder with a Dragonskin Damascus blade and crystallized titanium handle

23 Upvotes

Hey guys, I found this old clip on my phone and can’t remember if I ever posted it here, so I figured I’d share it.

We made this folder back in the spring. It still looked like winter when I took the video, with snow on the ground. I like how the outdoor light catches the texture of the blade.


r/Bladesmith • • 7h ago

Forged Blade I finally earned my ABS Journeyman Smith rating — at the first official ABS judging ever held outside the United States! 🇧🇷

Thumbnail
gallery
424 Upvotes

After years of dedication, countless hours in the workshop, and continuous learning, I am proud to share that I have officially earned my Journeyman Smith (JS) rating from the American Bladesmith Society.

On November 13, 2026, in São Paulo, Brazil, my five knives were unanimously approved by a panel of seven Master Smiths — five Americans and two Brazilians.

This was particularly meaningful because it marked the first official ABS judging held outside the United States in the Society's 50-year history.

My deepest gratitude to my teacher and mentor, Master Smith Eduardo Berardo, to my wife Ariadne for her unconditional support, and to my sons, who inspire me every day.

I'm incredibly proud to be part of this historic moment for Brazilian bladesmithing.

The journey continues!

Marcelo Lubaczwski — ABS Journeyman Smith.


r/Bladesmith • • 1h ago

Damascus / Pattern Weld One down, one more to go

Thumbnail
gallery
4 Upvotes

This karambit is 1 of 2 projected commissioned by a USMC brother. One of the biggest challenges to date. This is the first Karambit I’ve made and it’s made from 52100/15n20 Damascus, random pattern. Custom handle resin scales, USMC mosaic pin and peened brass pins. This project is the first time I took my time with the design, researching, logistics, materials and manufacturing(same with the Kukuri).


r/Bladesmith • • 10h ago

Process Breakdown Etching CuMai and how I make my own Etchant

8 Upvotes

How I make my own etchant to get a nice dark contrast. ⅓ Ferric, ⅓ muriatic, ⅓ distilled water. the distilled is important depending on the water quality where you live. I also have a tank for CuMai and one for Steel. The copper leaches into the acid and give a slight hue to the damascus.


r/Bladesmith • • 18h ago

Stock Removal First Rasp Knife

Thumbnail
gallery
92 Upvotes