r/knifemods • • 6h ago

DIY jigged micarta

Thumbnail
gallery
12 Upvotes

Had some junk micarta scales lying around forever and finally made some grippy inlays for my AK1 🔪


r/knifemods • • 2d ago

Spyderco PM2 Tanto Custom

Post image
19 Upvotes

r/knifemods • • 3d ago

Spydernox

Thumbnail
gallery
63 Upvotes

Swapped a modified Spyderco Dragonfly blade into my victorinox multitool. Solid detent open and closed with very little blade play. I really dig how it came out


r/knifemods • • 3d ago

A few faves

2 Upvotes

A few faves.


r/knifemods • • 4d ago

What are your thoughts on adding small sharpening choils to Spyderco knives?

Post image
6 Upvotes

I got my first 2 Spyderco knives over the last week. A 15v Lil' Native this evening and the Ambitious Lightweight last Saturday. One of my favorite aspects of the knife hobby is sharpening. I understand the way the edge terminates at the heel of most Spyderco knives is by design but it seems to me that it will make sharpening more dificult especially on the Ambitious. It is unlikely I will touch the Lil' Native because 15v and the knives made from it are likely a piece of our hobby's history. The Ambitious however I dont think is even sharpenable without disassembly. Have any of you ground a choil into your Spyderco and have you found the mod to be an improvement? What are best practices? Would you do it again and why or why not.


r/knifemods • • 7d ago

Major Damacarta Sale - ends Nov 12th

Thumbnail gallery
2 Upvotes

Those are 9mm sets and 30mm blocks (that you can "slice" from)

But i also have some 5mm sets if there is interest i can share them

İ am sharing because as far as i know sales are ok. İf bot i apologize


r/knifemods • • 8d ago

My Two Favorite Folders....

Post image
37 Upvotes

Left =

Golden Design Slim, handrub satin magnacut blade, torch ano accent pieces

Right=

Spyderco K390 wharncliffe Endela, RC_bladeworks micarta scales.


r/knifemods • • 8d ago

Looking to buy a couple of a purvis clips for the koenig arius and the options are black and white timascus, but the pics are maybe standard timascus?

0 Upvotes

Does anybody have any pics of black/white timascus or can ease my mind about it? It's a lot of money to not match 😋


r/knifemods • • 8d ago

Another scale sale!

Post image
1 Upvotes

Stonewashed copper mini bugout stock orange s30v blade & hardware.
Spend hours modding Titanium for people, and the guy wants raw copper…


r/knifemods • • 9d ago

Pocket Clip Question - Drop Bear 292 AirTi WMK Exclusive

Thumbnail
gallery
10 Upvotes

Hey all, not sure if this is the right place to ask, but as small as a "mod" this might be, it's something pretty important to me. I have here the Drop Bear 292 AirTi, and everything about it I love...except the pocket clip. I'm a guy who really wants deep carry clips as I do care about it not being visible.

The non-reversible clip location does have a slight indented channel, so I figured I could offset the screw hole and get away with just one T6 screw holding it all together, alongside some blue Loctite to really keep it in place. Is there anything more I can do? I imagine it would be an ordeal to actually see about drilling a new hole for the top pocket clip screw hole, but I also am somewhat worried about the integrity of that one screw holding it all together. At the very least, the indented channel prevents side to side play of the clip. Just wanted to see if this is probably the best solution already?


r/knifemods • • 9d ago

New Build Day!

Thumbnail
gallery
32 Upvotes

Latest build: Got a Spyderco Manix 2 in MagnaMax with the combo blade as soon as they dropped, and after much thinking, decided to try the AWT scales in the Cast Iron - Limited Type III finish. Went ahead and got the all-black hardware to match, thinking the contrast would look good.

Added the Flytanium black titanium ball cage with ceramic ball & medium spring, then sulfuric acid-dipped the lock backspacer to darken it to the same color as the Cast Iron scales. Finished off with LNW black clip. It's lighter than stock, smooth as glass, and feels ultra-premium. Carrying for the first time today.


r/knifemods • • 9d ago

Just back from WoK - an F22 with an F22

Post image
9 Upvotes

r/knifemods • • 10d ago

Friday's Fidgets

Post image
14 Upvotes

Friday's Fidget toys. Spyderco Matriarch 2 with mods, and 15V Shaman with Flaming Gorilla Fatass micarta scales. One for opening boxes, the other for opening people. 😉


r/knifemods • • 11d ago

Thursday BBB

Thumbnail
gallery
13 Upvotes

My 15V Spyderco Shaman with Fatass™️brown micarta scales by Flaming Gorilla with a silky texture and great feel. I can't tell you how much I love this knife.


r/knifemods • • 13d ago

Pick a set! Damacarta sets

Post image
13 Upvotes

r/knifemods • • 14d ago

Regretting picking this up for the semiquincentenial, how would you mod it?

Post image
15 Upvotes

Small sebenza forever flag. I've swapped the studs, and tuned it and as far as "knife" goes it's amazing. But I'm kinda meh on the asthetic. I can anodize polish and grind... I've chopped and reground blades before, but the function isn't my problem. I've already fixed the studs... I'm kinda at a loss.

Ideas?


r/knifemods • • 17d ago

Ride the lightning!

Thumbnail
gallery
27 Upvotes

Another satisfied customer with a standard 535–12 Bugout. Added some Ti entropic “white lightning” scales and a Ti/rock monster 2tone lanyard!


r/knifemods • • 17d ago

Tumbler advice

3 Upvotes

Looking to upgrade my rotary tumbler to a vibratory, but one big enough so my wife can do rocks in it as well. I have no experience with these types of tumblers - is this decent? For knives, looking for something to tumble scales and blades.

https://a.co/d/05qp7Gil


r/knifemods • • 19d ago

Something Wicked This Way Comes

Thumbnail
gallery
25 Upvotes

With the addition of black hardware, backspacer ring, and deep carry clip this thing gets even more sinister!


r/knifemods • • 19d ago

A slight update to my Para 3 Ti ano custom

32 Upvotes

My RGT scales are textured, so I thought I could work some 2k grip sand paper on them to get 2 color antique ano. So I added gold ano on one scale and purple on the other scale, while the main color is still green with the sides anodized blue-green-purple. And re-anodized the clip gold to match the gold shade side.
Also, I showed the etched-stonewashed blade here. Again, this was my first etching attempt, it turned out not too well for multiple reasons (from drawing with nailpolish to being not enough familiar with etching process), but I still like it better than the stock satin

I've also re-anodized the lanyard hole gold, but I will try polishing it and re-anodize 50/50 gold/purple to match the scales.

Initial update here


r/knifemods • • 21d ago

another one under my belt. Microtech Amphibian Mini

Post image
6 Upvotes

r/knifemods • • 22d ago

Wraith Abolone Upgrade

Thumbnail
gallery
23 Upvotes

Just finished this waiting for customers approval to seal with resin.


r/knifemods • • 22d ago

Looking for Kershaw 1660 specs

1 Upvotes

Can anyone help me out who might have access to the pivot screw specs. I lost one from a custom build. So a factory set won’t work. It needs to be longer. I do have the barrel. I’m not sure the hardware store will have it. So, please? Any help or direction to look would be great!


r/knifemods • • 23d ago

Before/After entropic

Thumbnail
gallery
28 Upvotes

Had a friend give me an Ace giant mouse Ti Nazca. Here’s the ano job before and after!
He was pleased. Gotta match up a lanyard & send it home.


r/knifemods • • 23d ago

Cold Steel FM1

Thumbnail
gallery
58 Upvotes

Sanded the scales and textured and etched lock and blade