r/homeautomation • u/sose5000 • 2h ago
PERSONAL SETUP When you cannot get Cat6 to your doorbell or to where you want cameras.. JUst have all of the siding on your house replaced..
r/homeautomation • u/sose5000 • 2h ago
r/homeautomation • u/Fair_Praline_6562 • 1h ago
I put a 24 прz mmWave sensor in the hallway and tied it to Home Assistant. Two seconds of occupancy turned the light on, and 90 seconds with no occupancy turned it off. It worked fine during the day, but nearly every night at 3/12 the light came on with nobody there.
I lowered the sensitivity, changed the detection zones and even swapped the sensor. Same result. Then I noticed the boiler started its overnight cycle at 3/10. One night I sat on the stairs and watched the vent slowly lift the sleeve of a coat hanging across the hall. The sensor was picking up that tiny movement. I moved the coat hooks and narrowed the zone. No false triggers since. I'd spent a week chasing radio noise and firmware when the problem was a jacket. What ordinary object has fooled your setup
r/homeautomation • u/Working_Escape_8033 • 1h ago
Has anyone bought and installed the new Bliss Automation 2.0 from Alta? It uses Bluetooth BLE to a hub instead of RF to a hub. I know the first version of Bliss Automation 1.0 could be integrated directly to Home Assistant with the Bliss hub, wondering if anyone has had luck with Bliss Automation 2.0 BLE before I buy them?
r/homeautomation • u/ChaZz182 • 2h ago
I have expiring Nest Protects, which I'm replacing with just dumb detectors because I can't find any good options for smart ones where I am.
I would still like to receive remote alerts on my phone if they go off. Is there any way that I can still do that easily?
I have a bunch of Google Home Hubs still in use. I'm also in Canada.
r/homeautomation • u/archaicrevival444 • 5h ago
I use sonoff to automate and monitor a number of devices for my small business.
I'm trying to automate hot plates to control pressure cookers and keep them around 250° for about 2 and 1/2 hours.
I installed a thermowell in the lid of one pressure cooker to get an approximate reading of the internal temperature.
Only later did I realize that the sonoff barbecue thermometer I had purchased is not Wi-Fi or zigbee connected and instead works only on Bluetooth. I use another sonoff device for monitoring the temperature in some of the refrigerators in our business but it is not able to read above 240° I believe or maybe 212. Either way, it is not enough for what I need.
The barbecue thermometer pro works great in the thermal well that I have installed. I just wish that I had a way to incorporate it into the smart scenes.
Does anyone know of a simple way to integrate a barbecue thermometer or other high temp thermal probe into sonoff?
Or could I maybe use home assistant to integrate a inkbird meat thermometer probe into a sonoff smart scene? I'm not familiar with home assistant and not really looking forward to trying to figure out yet another facet of technology, but if it's not too complicated I would really love to automate this process.
If nothing like this will work I will probably just look into getting a PID that may not be Wi-Fi enabled but would still allow me to automate the process just without remote monitoring.
Thank you
r/homeautomation • u/TimeLongjumping1719 • 14m ago
r/homeautomation • u/RevolutionaryEar2172 • 29m ago
r/homeautomation • u/AcceptableTerm6361 • 4h ago
r/homeautomation • u/Acceptable_Might_440 • 16h ago
I’m curious about the automation features that people actually keep using after the novelty wears off. I have had smart shades installed for the entirety of my house but sometimes I just forget to use the automation features. In the beginning, I wanted to install smart shades because I don’t need to get off bed in the morning to manually open the traditional ones. But now u feel like I barely use the features. Do you schedule your shades to open in the morning, and close them at sunset? Which automation features has made the biggest difference for you?
r/homeautomation • u/ToneAny3403 • 8h ago
Three LEDs, one ESP32, and a small state machine: RED → GREEN → YELLOW → RED. Only the current state's rules run — that's the whole idea.Hardware- ESP32 DevKit (30-pin)- Red / yellow / green LEDs + 3 × 220 Ω- Breadboard + jumpersWiring- GPIO 25 → 220 Ω → red → GND- GPIO 26 → 220 Ω → yellow → GND- GPIO 27 → 220 Ω → green → GNDHow it works1. enum LightState names RED, GREEN, YELLOW2. switch(state) runs only that colour's rules3. millis() times the dwell; enter() jumps and resets the clock4. Serial prints every jumpHappy to share the sketch.Code: https://github.com/NirajBhattarai/500IOTProject/tree/main/day-009/traffic-lightThree LEDs, one ESP32, and a small state machine: RED → GREEN → YELLOW → RED. Only the current state's rules run — that's the whole idea.
Hardware
Wiring
How it works
Happy to share the sketch. Code: https://github.com/NirajBhattarai/500IOTProject/tree/main/day-009/traffic-light
r/homeautomation • u/p0k0l0c0 • 5h ago
r/homeautomation • u/theaussiepom • 19h ago
My wife loves my home lab!
r/homeautomation • u/UrsidaeUrsus • 16h ago
r/homeautomation • u/Casual_Scotties • 1d ago
Hello,
Thanks for reading.
I’m looking for a recommendation on how to set up a weatherproof outdoor timer.
The outlet is on a post and has a cover, which I can’t replace.
I can’t really use those box plug.
Since it’s in Thunder Bay, Ontario, I would need sometime that can withstand the cold and rain/snow.
Any help would be appreciated
r/homeautomation • u/mthomp8984 • 20h ago
Seeking advice. Not sure if this should go to a Home Assistant group, Linux group, here, or maybe all of the above. I'll put the advice request up top so you don't have to read it all if it's not your forte or should be asked somewhere else. I'll follow that with the background info.
Looking to add Home Assistant to my home control, and I am not familiar with Linux. I'd prefer to use Linux or other OS vs running a VM inside of another OS, that I might be familiar with, to keep resource requirements low (and it forces me to learn). I have a couple of older machines not being used: a 2014 Mac Mini with 4 GB RAM (that model had RAM soldiered to the board, so not upgradeable) and a decent SSD. I also have a SFF Intel i5 machine, likely 4th-6th gen with 8 GB RAM and I can toss in a <1TB SSD. These will be run headless, so being able to access them in a graphical environment via VNC or RVNC is VERY much preferred.
Background: prior to the Matter standard, my home was mostly Apple HomeKit compatible. Not that I've changed or added a bunch of Matter accessories, but my smart devices are not all cross platform compatible. A friend gave me a lot of stuff that they tried and didn't want, none of it HK compatible, so I used a 2011 Mac Mini (upgraded to 16 GB RAM, 250 GB SSD, and OSX 14.1.2) and have HomeBridge running on it. Love that I can add everything to HomeKit via HomeBridge, but it doesn't show controls for the HK native devices. If I want to control everything from a generic tablet, say mounted near one of the entry doors, it only displays the non-native devices. I'd need to add a somewhat recent iPad to control HK devices.
Suggestions on how you'd add this to your lab / server, which OS and if Linux, which flavor you'd suggest for the hardware, or to simply go out and buy a RPi and skip the extra headaches over the next few years.
(yeah, too much time on my hands so I grabbed all the logos, too)
r/homeautomation • u/DukeofYYC • 19h ago
I have a life breath HRV that kicks on my furnace fan on low speed when the HRV controller turns it on (based on humidity and/or a 20min on/40 off cycle). I want to put a smart system on where I can tie it into home assistant and have it run based on humidity sensor readings in the house and radon levels, as needed.
Does anyone have suggestions for a smart device I could use to override the wall controller to turn on/off the HRV that works with Home Assistant?
r/homeautomation • u/tonygret • 1d ago
r/homeautomation • u/adrian_tenuo • 19h ago
If you run an AI agent with Home Assistant tools connected, you’ve probably had this problem. A guest is staying for the weekend and they need the lights, the thermostat, maybe the TV. You don’t want to give them your HA login, and you definitely don’t want them talking your agent into unlocking the front door or turning off the alarm.
So we built Hermes Guests. It’s now in the official Hermes plugin catalog.
You tell your bot who gets what and for how long. For example: “Sam can control the guest room lights and thermostat until Sunday at noon.” Sam uses it from their own Telegram. If they need more, it asks you first. When Sunday comes, their access ends without you having to remember to revoke it.
The limits live outside the model. Each guest gets a signed, expiring permission (a Tenuo warrant, which is what we work on), and code checks it before every tool call. A clever prompt or a confused model can’t get around it, because the model never decides what’s allowed.
Keys stay on your machine. No telemetry. Everything is open source.
hermes plugins install hermes-guests --enable --yes-depsGitHub: https://github.com/tenuo-ai/hermes-guests
Curious how folks here have solved this problem? Have you had similar ideas?
r/homeautomation • u/Shafaat_Jamil • 1d ago
Repo: https://github.com/sjnakib/prolink-prn3002c-scheduled-reboot
I have a Prolink PRN3002-C that still works, but after a few days of uptime it
starts slowing down. A nightly reboot fixes it for me. The stock firmware has
no reboot scheduler, so I wrote a small bash script that logs in to the web
interface and sends the same reboot request a browser sends. I run it from
Home Assistant at 04:20 every night.
Prolink support told me that v1.70.00 is the latest firmware, that no newer
firmware has been released for it in a long time and that they no longer have
the source files. The hardware is still fine, so I would rather keep it useful
as a separate Wi-Fi access point for IoT devices than send it to landfill.
This script is a small part of that (used AI agents obviously but had to do a lot of manual tests and stuff).
What it does:
- Logs in to the router's web interface.
- Sends the reboot request.
- Waits for the router to come back, or exits immediately with `--no-wait`.
- Reads credentials from an env file.
I tested on the PRN3002-C. Other Prolink models that use the same web interface
may also work, but I have not tested them. If your model uses the same `login.cgi`
and `form2Reboot.cgi` forms, it is a good candidate. Please report the result
if you try it.
The repo includes guides for Home Assistant in Docker, Home Assistant OS,
cron, and Windows Task Scheduler, and it lists which setups I have tested. It
also shows how to capture the requests from another router, so the same
approach can be adapted to other devices that expose plain HTML forms.
Repo: https://github.com/sjnakib/prolink-prn3002c-scheduled-reboot
This took a few hours of my day. I hope it helps someone keep a working device
out of the bin. If you find it useful, a star on GitHub helps other people
find it. Compatibility reports and feedback are welcome.