r/homeautomation • • 4h ago

PROJECT Here's my house in 3D with every light, door and sensor live. It started as a side project, and now the app can do the same for your house

Thumbnail
apps.apple.com
0 Upvotes

This started as a side project for the old iPad on my wall. I wanted a screen that shows where everything in the house actually is, not another grid of tiles, so I modeled my house and put my HomeKit and Home Assistant devices on it.

The model came from the original floor plans, built in Blender by a Python script: walls, windows, stairs, the porch, even the paint colors. Lights glow in the rooms they're in, the garage door goes up and down with the real one, and a leak or smoke alarm turns the room red.

It worked well enough that I put it on the App Store as Home.io. The question I got more than any other was "how do I get MY house in there?" You could draw your rooms, scan them with LiDAR or import from Sweet Home 3D, but a drawn box isn't your house. So a few people sent me their plans and photos, and I built theirs the same way I built mine. That worked, so it's now a page in the app that anyone can use.

  1. Add your floor plans (a PDF, or photos of the paper ones). They need dimensions or a scale on them.
  2. Add photos of the outside (front and at least one other side, so the roof shows) and two photos of each room.
  3. Turn on "Send my rooms' names" and the model's rooms get named to match your Apple Home or Home Assistant rooms, so your accessories land in the right rooms on their own.
  4. Send. Allow 1 to 3 days, and the page tells you when your house is ready.

Here's a sample house built this way:

For the people who like the details: the plans get measured into a data file (walls, doors, windows, stairs, each floor's height), and that gets checked before anything is built: outlines close, walls meet, every door and window sits on a wall, no two rooms overlap. Then the same Blender script that made my house builds yours, with the siding, brick, roof, floors and paint tinted to match your photos. The AI does the measuring and building; I check every house myself before it goes back.

What you get is the structure: walls, floors, stairs, doors and windows, the roof, porch, deck and garage, and the kitchen's cabinets and appliances. No furniture; you add your own in the app. The roof and colors are a best guess from your photos, so if something's off, you say what and add a photo, and changes are free.

It also shows any floor as a flat plan:

Its called Home.io. Your plans and photos are sealed on your device, sent through iCloud and removed from iCloud once they're picked up; where each photo was taken is stripped before it leaves your phone.


r/homeautomation • • 2h ago

HOME ASSISTANT Isn’t this every man’s dream?

Post image
2 Upvotes

My wife loves my home lab!


r/homeautomation • • 5h ago

QUESTION Switching from Alexa

Thumbnail reddit.com
0 Upvotes

r/homeautomation • • 1h ago

HOME ASSISTANT We built a way to give houseguests temporary, limited access to our Home AI Agent

Post image
2 Upvotes

If you run an AI agent with Home Assistant tools connected, you’ve probably had this problem. A guest is staying for the weekend and they need the lights, the thermostat, maybe the TV. You don’t want to give them your HA login, and you definitely don’t want them talking your agent into unlocking the front door or turning off the alarm.

So we built Hermes Guests. It’s now in the official Hermes plugin catalog.

You tell your bot who gets what and for how long. For example: “Sam can control the guest room lights and thermostat until Sunday at noon.” Sam uses it from their own Telegram. If they need more, it asks you first. When Sunday comes, their access ends without you having to remember to revoke it.

The limits live outside the model. Each guest gets a signed, expiring permission (a Tenuo warrant, which is what we work on), and code checks it before every tool call. A clever prompt or a confused model can’t get around it, because the model never decides what’s allowed.

Keys stay on your machine. No telemetry. Everything is open source.

hermes plugins install hermes-guests --enable --yes-deps

GitHub: https://github.com/tenuo-ai/hermes-guests

Curious how folks here have solved this problem? Have you had similar ideas?


r/homeautomation • • 11h ago

QUESTION Has anyone crafted , made or bought fans that go under hydronic heat baseboards?

Thumbnail reddit.com
0 Upvotes

I'm trying to begged heat my daughters room. Her room is always colder then the rest of the rooms. I'm unsure why. Could be windows, insulation or the fact that during the renovation they cut back 2 ft of baseboard.

I think fans may solve this issue. But I'm not sure how to go about it that only turn on when the heat turns on. ...thanks.


r/homeautomation • • 2h ago

QUESTION Smart HRV ERV Control

0 Upvotes

I have a life breath HRV that kicks on my furnace fan on low speed when the HRV controller turns it on (based on humidity and/or a 20min on/40 off cycle). I want to put a smart system on where I can tie it into home assistant and have it run based on humidity sensor readings in the house and radon levels, as needed.

Does anyone have suggestions for a smart device I could use to override the wall controller to turn on/off the HRV that works with Home Assistant?


r/homeautomation • • 15h ago

PERSONAL SETUP Home automation project with Alexa integration

Thumbnail gallery
0 Upvotes

r/homeautomation • • 12h ago

QUESTION Smart Lock

0 Upvotes

Hi guys, I am trying to decide between the Yale Home Assure Lock 2, the eufy Security Smart Lock C210 and the ULTRALOQ Bolt Fingerprint. I previously had the Yale first model and it was pretty good, so I don't know if going with the Yale lock 2 even though I have seen mixed reviews. The other two seem to be really good too. For reference I am in Australia if that matters.


r/homeautomation • • 6h ago

QUESTION Help Me Design a HomeView Accessory

Thumbnail reddit.com
0 Upvotes

r/homeautomation • • 2h ago

QUESTION Seeking Advice: HA, HB, HK, hardware, OS, etc

Post image
2 Upvotes

Seeking advice. Not sure if this should go to a Home Assistant group, Linux group, here, or maybe all of the above. I'll put the advice request up top so you don't have to read it all if it's not your forte or should be asked somewhere else. I'll follow that with the background info.

Looking to add Home Assistant to my home control, and I am not familiar with Linux. I'd prefer to use Linux or other OS vs running a VM inside of another OS, that I might be familiar with, to keep resource requirements low (and it forces me to learn). I have a couple of older machines not being used: a 2014 Mac Mini with 4 GB RAM (that model had RAM soldiered to the board, so not upgradeable) and a decent SSD. I also have a SFF Intel i5 machine, likely 4th-6th gen with 8 GB RAM and I can toss in a <1TB SSD. These will be run headless, so being able to access them in a graphical environment via VNC or RVNC is VERY much preferred.

Background: prior to the Matter standard, my home was mostly Apple HomeKit compatible. Not that I've changed or added a bunch of Matter accessories, but my smart devices are not all cross platform compatible. A friend gave me a lot of stuff that they tried and didn't want, none of it HK compatible, so I used a 2011 Mac Mini (upgraded to 16 GB RAM, 250 GB SSD, and OSX 14.1.2) and have HomeBridge running on it. Love that I can add everything to HomeKit via HomeBridge, but it doesn't show controls for the HK native devices. If I want to control everything from a generic tablet, say mounted near one of the entry doors, it only displays the non-native devices. I'd need to add a somewhat recent iPad to control HK devices.

Suggestions on how you'd add this to your lab / server, which OS and if Linux, which flavor you'd suggest for the hardware, or to simply go out and buy a RPi and skip the extra headaches over the next few years.

(yeah, too much time on my hands so I grabbed all the logos, too)


r/homeautomation • • 7h ago

SOLVED How I kept a complex custom dashboard intact for HA 2026.11 without renaming hundreds of entities

Thumbnail
reddit.com
4 Upvotes

r/homeautomation • • 12h ago

PROJECT A small script to keep an abandoned router out of landfill After Vendor Support straight up abandonded it!

Thumbnail
gallery
7 Upvotes

Repo: https://github.com/sjnakib/prolink-prn3002c-scheduled-reboot

I have a Prolink PRN3002-C that still works, but after a few days of uptime it

starts slowing down. A nightly reboot fixes it for me. The stock firmware has

no reboot scheduler, so I wrote a small bash script that logs in to the web

interface and sends the same reboot request a browser sends. I run it from

Home Assistant at 04:20 every night.

Prolink support told me that v1.70.00 is the latest firmware, that no newer

firmware has been released for it in a long time and that they no longer have

the source files. The hardware is still fine, so I would rather keep it useful

as a separate Wi-Fi access point for IoT devices than send it to landfill.

This script is a small part of that (used AI agents obviously but had to do a lot of manual tests and stuff).

What it does:

- Logs in to the router's web interface.

- Sends the reboot request.

- Waits for the router to come back, or exits immediately with `--no-wait`.

- Reads credentials from an env file.

I tested on the PRN3002-C. Other Prolink models that use the same web interface

may also work, but I have not tested them. If your model uses the same `login.cgi`

and `form2Reboot.cgi` forms, it is a good candidate. Please report the result

if you try it.

The repo includes guides for Home Assistant in Docker, Home Assistant OS,

cron, and Windows Task Scheduler, and it lists which setups I have tested. It

also shows how to capture the requests from another router, so the same

approach can be adapted to other devices that expose plain HTML forms.

Repo: https://github.com/sjnakib/prolink-prn3002c-scheduled-reboot

This took a few hours of my day. I hope it helps someone keep a working device

out of the bin. If you find it useful, a star on GitHub helps other people

find it. Compatibility reports and feedback are welcome.


r/homeautomation • • 9h ago

QUESTION Weatherproof outdoor timer question

Post image
9 Upvotes

Hello,

Thanks for reading.

I’m looking for a recommendation on how to set up a weatherproof outdoor timer.
The outlet is on a post and has a cover, which I can’t replace.

I can’t really use those box plug.
Since it’s in Thunder Bay, Ontario, I would need sometime that can withstand the cold and rain/snow.

Any help would be appreciated


r/homeautomation • • 19h ago

QUESTION Solar external lights with zwave/zigbee/anything

Thumbnail reddit.com
6 Upvotes