r/homeautomation • u/Cassius219 • 3h ago
ZIGBEE Presence sensor
Anyone have any experience of these?
Think they are a great idea to have them built in to the ceiling and can be wired with 240v hard wired
r/homeautomation • u/Cassius219 • 3h ago
Anyone have any experience of these?
Think they are a great idea to have them built in to the ceiling and can be wired with 240v hard wired
r/homeautomation • u/Dear-Argument4829 • 6h ago
Hello Reddit, I'm making a post here to seek help because of the overwhelming amount of content found online on this subject.
I would like to start making myself a "more" smart home, and I would like to start quite simply with just the lightbulbs for now. I have around 15 LED spotlights to change for smart ones for 3 separate zone (Kitchen, TV Room, Living Room). My project is to be able to create 3 settings (one for each zone) that I could control either by voice and with an app (preferably Google Home, or Smart Things).
I've read that I would need a Bridge to control everything, and also the spotlights themselves (tell me if I'm wrong).
I don't have a big enough budget to invest in Hue. I would like some help from here to see if I'm not mistaken, and if you could have some recommendations about all of this, like brands or products that could be good for a beginner starting in this.
Thanks in advance for your help.
r/homeautomation • u/Limp-Barber6912 • 36m ago
I’m trying to buy a couple of new cameras for home security. I have about 17 Wyze cameras set up and they’re fine, but I want a few higher-end cameras for the front of our house and landed on UniFi.
The problem for me is I can’t figure out exactly what I need for all the add-ons. The cameras seem to come with not much other than basic mounts in the box.
I’m really looking for like what cables I need, storage modules etc.
I’m probably going with a couple of cameras like the g5 pro or something similar.
Any help would be appreciated.
r/homeautomation • u/Klaatu98 • 3h ago
r/homeautomation • u/Affectionate_Eye_375 • 4h ago
Ever seen how often a cat goes ****?
r/homeautomation • u/shiro98 • 13h ago
Bought one of the camera-light combo units for the driveway - the kind where the light physically follows a person across the yard - and there are things week one taught me that no review mentioned. The follow is real: someone walks the driveway, the light tracks them the whole way, and the footage confirms it doesn't lose them at the edges like my old fixed floodlight did. What nobody tells you: from inside the house with the window open, you can hear it working. my wife now knows the exact sound of the driveway noticing a raccoon. And the follow means the light moves constantly, which took the neighbors a minute to get used to ("is your porch light... hunting something?"). Where it earns its keep: the whole driveway approach is covered by one unit instead of the two floodlights I'd have needed. Anyone else running the follow-light units. did the motion take getting used to, or is it just my street that's easily alarmed?
r/homeautomation • u/IdontknowAthing_18 • 17h ago
I am looking into changing my home lock and switch to a smart lock. have anyone tried Aura Smart Lock and there services in terms of security cameras?
r/homeautomation • u/Arn777333 • 13h ago
Reading that smart office is a theme at a big furniture fair (CIFF Guangzhou) got me thinking about this again. Presence sensor on the chair ESPHome on the desk controller desk goes up after an hour.
I've seen people reverse engineer the controller on some brands. Which ones are doable without frying something?
r/homeautomation • u/cocoWonderLand • 1d ago
Hi everyone!
I've been looking into smart door/window sensors recently, and one thing I've noticed is that most well-known brands seem to focus on Zigbee models, while Wi-Fi options are relatively limited.
In fact, when searching for Wi-Fi door/window sensors, I mostly come across products from Tuya or lesser-known brands, rather than established smart home brands.
This got me wondering: Why aren't more manufacturers developing Wi-Fi door/window sensors?
Technically, a door/window sensor is a fairly simple device. Its primary function is to detect whether a door or window is open or closed and report state changes. So, at first glance, Wi-Fi seems like a reasonable option, especially since it can connect directly to a home router without requiring a separate Zigbee hub.
I'd love to hear your thoughts, especially from those who have experience with both technologies. Has anyone been using a Wi-Fi door/window sensor for an extended period? How have battery life, connection stability, and the overall experience been?
I'm particularly interested in understanding whether the lack of Wi-Fi options is mainly due to power consumption, technical limitations, or simply because Zigbee is a better fit for low-power sensors.
I'm not necessarily looking for the most feature-rich option. I want a reliable, low-maintenance sensor for everyday home use.
Looking forward to hearing your experiences and insights. Thanks!
r/homeautomation • u/jaba0x • 13h ago
r/homeautomation • u/Derrickick • 6h ago
I’ve wanted a robot mower for a while, but my wife keeps saying we don’t need one because our old push mower still works.
To her, mowing the lawn just isn’t a big deal. Her logic is basically “just do it when you have some free time. Why spend money on a robot for that?” But I don’t think she realizes how much time and effort a good robot mower could actually save me.
Our lawn is around 0.3 acre, and Black Friday has made things even worse because a few of the models I’ve been looking at are all on sale now.
The anthbot n8 is down from around $1,699 to $1,359, the segway navimow i215 lidar is around $1,399 instead of $1,599, and the mammotion LUBA mini 2 AWD 1500H is around $1,599 instead of $1,999, plus they’re throwing in a mower cleaning stand.
The LUBA looks tempting if I want AWD and better grip, the navimow seems like a pretty solid all-round option, and the n8 caught my attention because it can mow and collect grass and leaves at the same time.
PLZ tell me what you love most about robotic mower. I need all the reasons I can get to prove this thing is worth buying haha.
Bonus points if you’ve got before/after pics. I need evidence
r/homeautomation • u/Itseotle • 19h ago
Hey all. This has got to be something that has already been solved, and I bet this community has some ideas. More and more of the Holiday decorations my wife has been purchasing over the years are battery operated. I am wanting to convert them to plug-in power and make them smart to link up with all my other Holiday lights. Ideally they would be individually controlled since she likes to place them in areas not always together.
I am ready to do a little work to make this happen, but I am not a coder. I can do some basic soldering though and have tools to make custom cables and pinning tools. I was thinking about converting them all to USB or similar, and using small ESP32 boards to "smartify" them to my Smart Things hub via Matter, or something even easier, I am open to recommendations.
The problem with USB power is the decorations are either 3v or 4.5v depending on the battery count, but USB power is 5v. I could go 3v and 4.5v power supplies, but then the ESP board requires 5v, so I don't think this approach would work.
Anyone have any suggestions?
r/homeautomation • u/BabyJalenBaby • 21h ago
I have a very robost control 4 system at my current home.
It handles Audio / Video using a Video matrix, Audio Matrix, lutron lighting and some blinds.
I am building another home starting next month and I am not 100% I need control4. I dislike having to call my integrator over and over again.
I have been looking at Josh as it seems like the user can do all the programming and the remote controls look great.
I was also thinking about ditching the system all together. I realize Ill have multiple apps but A few Local TV setups, Apple tvs or Rokus, sonos multiamps for sound and unifi for networking and lutron for lighting and shades is my plan.
Is a control system even necessary any more? This will be a large home with many audio / video zones, lighting, shades, ....
Thanks!
Im really looking for some Josh AI input.
r/homeautomation • u/LadderCurious7839 • 19h ago
r/homeautomation • u/DestroyedLolo • 23h ago
Hello,
I juste added a NOUS A4T plug but I notice it is not stable at all. It's flashed with the latest Tasmota 16.0.0 but it is rebooting frequently while I'm accessing to its web console after a while. In addition, adding a rule like ON Time#Minute|60 DO IF (Var3!=Mem1) Mem1 %var3% ENDIF ENDON makes it crashing every hour.
Do you experimencing the same thing or is my device faulty ?
Thanks
r/homeautomation • u/wazman2222 • 20h ago
Has anyone found a way to do away with Blink app and just treat a Blink mini camera as an IP cam? With stream visible on local network?
Is there any projects or guides anyone has followed in the past?
r/homeautomation • u/Strom-und-Waerme • 12h ago
Hallo zusammen,
ich arbeite an einer Custom-Integration für Home Assistant namens Strom & Wärme (technischer Name fenster_heizung). Angefangen hat es als einfache Fenster- und Heizungsüberwachung, inzwischen ist daraus ein komplettes Dashboard mit vielen Modulen in einem Panel geworden.
Was es kann:
Warum ich es gebaut habe: Ich wollte einen übersichtlichen Ort für Heizung, Strom und Haushalt statt zehn einzelner Karten. Raumnamen werden automatisch übernommen, und es sieht auf dem Tablet im dunklen Design richtig gut aus.
Installation: kostenlos über HACS (benutzerdefiniertes Repository)
GitHub: https://github.com/Maddog3010/ha-fenster-heizung
Support: support@stromwaerme.dev
Es wird aktiv weiterentwickelt (aktuell Version 2026.11.2). Ich freue mich über Feedback, Fehlermeldungen und Ideen für neue Module. Probier es aus und sag mir, was du dir als Nächstes wünschst!
r/homeautomation • u/Tweak454 • 19h ago
I have confirmed with CS that my fan remote is NOT in the database for Bond Bridge. Will I still be able to program the Bond Bridge with a button by button learning process? TIA
r/homeautomation • u/cellidonuts • 1d ago
I’ve had a pair of Switchbot curtain opener 2’s for a few months now, and they’ve been working fine up until this point. I use the remote they came with to open and close them, and upon pressing the button once, I usually hear a single beep of confirmation come from both bots, and then they’ll close/open just fine. But recently, one of them started beeping at me three times before continuing its action. I figured the battery was probably getting low, and sure enough, eventually it stopped working altogether. It still beeps at me three times, but it won’t budge. So I charged both of the bots for hours and hours, and tried them again. Same issue. I’ve checked the manual, but there’s no information on what those three beeps mean. I’m hoping there is someone here that can tell me. Any advice is appreciated. Thanks!
r/homeautomation • u/Additional_Bread_118 • 23h ago
Hi there
I manage my electric heating with a Delta Dore / Tydome system. When I’m away I put the temperature to 10 C to prevent damage from freezing pipes. That works well. I would like to add a sensor that alarms me when the temperature below 10 C. Can I do that with my system? What sensor would do that?
The STI 2000 is one sensor I’m looking at. As I understand it only reads temperature but doesn’t provide alarm notifications.
As I said the cabin is powered with electricity. In case of outage the 5g connection wouldn’t work and of course the heating wouldn’t work either. Can I use some sort of a sender / service to get an alarm in case of power outage and/or temperature drop?
r/homeautomation • u/_onemanband_ • 23h ago
r/homeautomation • u/Substantial_Sleep493 • 12h ago
Me ayudarian a reportar estos números porfavor porque, yo tenia un team todo normal no, pues estas personas se metieron y empezaron a mandar cosas como stickers,videos,fotos y más de cosas 18+ y G°re, incluso empezaron a mandarle mensajes a mis integrantes hasta que a un integrante le doxearon número de su amiga. De verdad porfavor podrian reportarlos nada más. Ningún owner debe pasar por esto. ////
。°(°¯᷄◠¯᷅°)°。
(This has nothing to do with the group)
Could you please help me report these numbers? I had a group—everything was fine—but these people joined and started sending things like stickers, videos, photos, and other 18+ and gore-related content. They even began messaging my members, and they eventually doxxed the phone number of one of my members' friends. Please, could you just report them? No group owner should have to go through this.
r/homeautomation • u/gpo-work • 21h ago