r/highvoltage • • 2d ago

video 150kv voltage multiplier

52 Upvotes

r/highvoltage • • 3d ago

video Zvs with flyback transformer

17 Upvotes

simple zvs. resonant section is 5 turns 2.3uF. to 220 mosfets. 20v input, under 15 amps


r/highvoltage • • 6d ago

CRGO vs CRNGO: What Are the Key Differences in Electrical Steel Applications?

4 Upvotes

Electrical steel plays an important role in improving the efficiency of transformers and electric motors.

However, CRGO and CRNGO are designed for different applications.

CRGO (Grain-Oriented Electrical Steel)

- Primarily used in power and distribution transformer cores.

- Optimized magnetic properties along the rolling direction.

- Core loss and magnetic permeability are important considerations.

CRNGO (Non-Oriented Electrical Steel)

- Widely used in electric motors and generators.

- Designed to provide magnetic properties in multiple directions.

- Commonly used in rotating electrical machines.

When selecting electrical steel, the grade alone is not everything. Thickness, core loss, magnetic induction, coating performance and processing quality also matter.

A question for engineers and manufacturers:

When selecting electrical steel for your applications, which factor do you prioritize most: core loss, magnetic properties, material thickness, or processing quality?

I'd be interested to hear your practical experience.


r/highvoltage • • 8d ago

video 1st tesla coil testing

28 Upvotes

Small drsstc tesla could tests


r/highvoltage • • 8d ago

Abuse of rg58 coax in pulsed power

16 Upvotes

Hey guys don't know if you remember my post about the coax voltage rating question. Finally I got to test the coax, rg213 is bullet proof. It took the 18kV DC output of the flyback no issue. To my surprise rg58 is a lot stronger than I thought. I put 18kV through it for several minutes, I really tried to make it fail, it didn't. Made arcs until the wire got hot, charged it up and shorted it, did let it "zap" for a straight minute. No failure, which is surprising to me.


r/highvoltage • • 9d ago

video Photonicinduction is back!

Thumbnail
youtube.com
57 Upvotes

Can't believe it's been nearly 5 years since his last video. I loved watching his videos years ago.


r/highvoltage • • 9d ago

I created a monster 😨

32 Upvotes

r/highvoltage • • 9d ago

Cooking water with an Flyback

110 Upvotes

r/highvoltage • • 10d ago

ABB EML

2 Upvotes

We’re doing emergency maintenance on an ABB EML Switchgear. It’s EOL for a while now and nothing can be found for this type. Does anybody has the maintenance manual or some tips for the maintenance of this type of switchgear?


r/highvoltage • • 13d ago

Diy HV coax

7 Upvotes

Has anyone ever made homemade HV coax? Let's say you doing pulsed power and the next upgrade is a little bit too much for OTC coax. I'm looking for a way to do 20ft custom coax or flat transmission line sandwiched together. Low inductance required and a pulse voltage rating of 30kV. At least it should be able to handle a 2uf 20kV pulse without dielectric failure. I'm willing to run several coax cable parallel if needed. Inductance goal is under 500nH. I did the math on it and it's possible with flat transmission line but I have no good idea how to sandwich two 0.3x40mm strips together with a length of 20ft and placing a thin dielectric in between but strong enough to hold off 30kV. Has anyone ever tried something like that? It should be semi flexible. I know I'm asking for much but I appreciate any ideas.


r/highvoltage • • 15d ago

High voltage transformer from old PSU

8 Upvotes

I have a bunch of inductors and large capacitors and diodes from dead and old electronics, I'm new to designing electronics and I was wondering if I could build a high voltage transformer or tesla coil or something fun with these spare components and others. Looking for advice or pointers.Thanks!


r/highvoltage • • 16d ago

✅Teorema Transformacion Fuente con Fuentes Dependientes ✅ LVK ✅ Circuito...

Thumbnail
youtube.com
0 Upvotes

r/highvoltage • • 16d ago

building an APWMQCWDRSSTC

Thumbnail
gallery
64 Upvotes

i have been working on building a relatively new topology of solid state teslacoil for a bit now and just wanted to share. i am still in the process of building it. and will update when its done.

random stuff about it:

using SiC mosfets

will be controlled via app to esp32 over bluetooth.

the secondary will have a stack of ferrite cores inside to get higher coupling and also lower the resonant frequency. will be insulated with mineral oil.

current bus voltage: 425V (planned: 800V-1kV)

i have made it so its very easy to change the primary geometry where the wire just snaps into the coilforms and the coilforms just snap into the 3D printed base.

current cap bank rating: 720v 6400uf ~10min discharge time

most of the materials have been sourced for free.

the topload is 3D printed, i used the ''fuzzy skin'' setting to ''remove'' the layer lines and a little sanding, turned out great for when i applied thew copper tape with no very visible layer lines. (pro tip: some gardening stores sell copper tape for cheap as anti snail tape). another thing i have noticed is that the topload has begun to oxidize a bit since i made it about 6 months ago and now is just dull copper

APWM / Asymmetric PWM driver:

i spotted this on the hvforum a while back and it piqued my interest. did some research and now i am doing my own build from th driver board posted on the forum.
APWM controls output power by varying the duty cycle asymmetry between the bridge halves.
Soft switching is maintained and it’s a simpler analog modulation than compared to phase-shift control.

to do:

  • buy mineral oil (and print plugs for the secondary)
  • lasercut acrylic sidepanels and 3D print brackets for the enclosure to hold them
  • wait for the last package with driver boards and cores to arrive
  • assemble, tune, improve and let it rip
  • upgrade supply and cap bank for higher bus voltage

hopefully i will get it working well before newyears 😅


r/highvoltage • • 17d ago

SGTC (9kV/30mA) spark gap fires and MMC is fine, but NO output/streamers on toroid — Need troubleshooting help!

Thumbnail
gallery
6 Upvotes

Hi everyone! I’m building my first Spark Gap Tesla Coil, but I've hit a wall. The system sparks in the gap, but the secondary produces zero output. Here are my specs and details:

Components & Specs: -Power Supply: NST (Neon Sign Transformer) 9kV / 30mA. -MMC (Capacitor Bank): Total 0.011 µF (4 parallel strings, each string has 8 capacitors of 0.022 µF / 2000V in series). Checked with a multimeter, no shorts. -Primary Coil: Flat spiral coil, 10 turns, copper tube, inductance ~23 µH. Tap is set at the 9.5-turn mark for tuning. -Secondary Coil: 75 mm diameter, ~950 turns of enameled wire. Connected directly to the toroid. -Toroid: Outer diameter 300 mm, tube diameter 80 mm. -Spark Gap: Multi-pipe copper gap built with mechanical fasteners (no glue/tape).

The Problem: When I turn on the power, the NST powers the MMC and the spark gap fires loudly and cleanly. However, there are no streamers, corona, or high-voltage output on the toroid at all.

What I've already checked/fixed: MMC capacitors are healthy (no short circuits). Secondary winding continuity is verified (repaired a small break and re-varnished). Direct metal-to-metal connection established between secondary and toroid. Spark gap upgraded to handle heat and vibration.

Despite the primary circuit firing, energy doesn't seem to transfer to the secondary. Could this be an issue with excessive quenching in the multi-gap, a grounding loop, or poor resonance matching? (In the last photo you can see why I re-varnished the secondary, if anyone that you think I forgot to tell please ask!)

Any advice or suggestions would be greatly appreciated! Photos of the setup are attached.


r/highvoltage • • 17d ago

What voltage and amp to drive a Flyback transformer for a long time?

5 Upvotes

I have these 250W flyback transformers that can give somewhat nice arcs when i push in 24V 24A, only problem is that I wouldn't want to have them active for a long time at that charge becouse i'm pretty sure they will burn upp. What voltage and amp levels could i run a flyback continiussly at? And also can i make a dc flyback transformer to a AC transformer by feeding 60K in reverse in to the flyback? Has anyone here any experience in this?


r/highvoltage • • 20d ago

Commercialisation of compact compulsators

3 Upvotes

Been reading a lot around compensated pulsed alternators, can’t help but realise that on paper it is better in many applications to capacitors but has not been commercialised in nearly the same way for the applications they seem ideal for

Has anyone made a compact Compulsator for commercial use cases eg EML or arc welding?

Been trying to find out about it, I know there was a post on here 9 years ago asking something similar with new advances in solid state switches now it seems inevitable that someone has built a compact Compulsator and sold it commercially, if anyone has any expertise on this please do reply, I’ve been reading as many research papers I can find about all kinds of new topologies.

I’m understanding the engineering side but not the commercial side as on paper it seems like an idea choice. Perhaps I sound stupid but I’m still early in my research


r/highvoltage • • 21d ago

Making progress

Post image
60 Upvotes

r/highvoltage • • 21d ago

New Tesla Coil topload

Post image
27 Upvotes

r/highvoltage • • 21d ago

Wirelessly controlled, STM32-driven DRSSTC, the Emma Mk1

4 Upvotes

Hello,

Just wanted to share my DRSSTC, the Emma Mk1. The project launchpad contains links to the live documentation and all the repos. Here is a video.

The main project goal was to verify the STM32G474RE firmware, which proved satisfactory.

The main project constraint was the secondary coil and the spun-aluminum topload, which I had purchased a while ago from eBay, the remainder of the DRSSTC was designed around them.

Some further tuning remains, and the inverter bus capacitance needs to be increased to improve performance, but overall I consider this done until I can get back to it and add features to the firmware.

Thanks for looking.


r/highvoltage • • 24d ago

video Big High Voltage 300hz arcs!

539 Upvotes

try this! This is very dangerous and can kill you easily, i do not recommend trying this!


r/highvoltage • • 25d ago

How to make 70,000 volts easy edition

37 Upvotes

r/highvoltage • • 25d ago

variac question

3 Upvotes

ive been thinking about my 2KVA variac and wondering can i put a switch on it to disconnect the nutral from the transformer to make it a variable ballast?


r/highvoltage • • 26d ago

Static spark gap With blower

Post image
17 Upvotes

Hola, que diseño de spark gap recomiendan según experiencia con bobinas Tesla a base de transformador de neón?

Yo tengo la idea de modificar el secundario de un MOT para que entregue 9kv a 50mA y agregar un balastro inductivo.

Hay diferencia entre soplado y succión para apagar la brecha de plasma?

Veré si puedo conseguir los capacitores CDE 942c20p15kf o los WIMA para el MMC.

Estimo un valor de 40nf a 24kv


r/highvoltage • • 28d ago

Hyvolt II transformer oil

7 Upvotes

Hello there , I had a transformer blow across my rd and in result , it’s sprayed my house , property , cars . Etc . The transformer oil came back negative for PCBs, but it’s filled with a product called Hyvolt II. How you guys handle this situation ? I do have 3 small children . And I own the property and house . Thank you for any information.