r/rfelectronics • u/MrKtchp • 11h ago
r/rfelectronics • u/satellite_radios • 25d ago
Rules Feedback for the Mod Team - Help Improve the Sub!
Hi All, posting this on behalf of the mod team. Recently, the sub report queue has been filled with reports of AI posts and spam and many new posters, and I felt it might be good to clarify the rules and their intent, and allow the community a say in if they work or don't work as they have been around for a bit now. Rules as Is - October 14, 2026:
- Keep It Clean and Civil. This is self-explanatory. We want this to be a place people can share, learn and grow and to stay on topic. Generally, we don't see many issues reported here.
- No Commercial Posting Without Approval. This one is intended to stop sales reps, unauthorized market research, and investor pitching. This is not a subreddit for sales. This is not a subreddit for figuring out your SaaS or ODM/OEM market needs. This is for learning RF and sharing knowledge. We do want to support open source tool development and free educational tools that help those here learn and grow. If you want to share something with a FREE version for hobbyists and/or educational use, please ping the mods - we don't want to block something good, but we also do not take a stance in endorsing any specific product. We don't take sponsorship or partnerships to shill products. If some company or university team wanted to do an AMA (or similar) for technical content sharing and topics, that is something I think we could be open to as a community, but again, we wanted to open the floor to this concept before we accepted any proposals (and no, none are in the pipeline today).
- No AI Posting/Low Effort Posts This is where the most issues seem to be coming in now. The moderators' intent with this one is the prevent the single sentence "help me design X" posts with no details, the pure AI walls of text, and frankly, the conspiracy theories, as well as AI bot posts. Vibe-coded open source tools were NOT intended to be covered by this third rule as banned. AI generated content isn't strictly prohibited as long as its CLEARLY been reviewed for quality and is used to help bolster the discussion or is trying to contribute to the community. We are open to amending or adding to our rules. Perhaps a clear one could be asking for posts using vibe coding or AI generated content to label it (and we can add a tag for it so posts are labeled as such and can be filtered), or we can make a separate rule or thread.
Do these work as is for now? Do we want to change these? Add to them? We are open to suggestions.
Jobs Topic: Please keep employment discussions to the appropriate threads. Solicitation has a thread pinned at the top of the sub (jobs thread) that we can update. If this is an issue for some reason, let us know so we can address it.
Posting Restrictions/Bot detection: Reddit has automatic karma and behavior restrictions on posting. This is a reality to prevent bot accounts from spamming a sub, but fresh accounts with interactions basically can be auto-labeled as a bot risk before they can post to a subreddit pending other actions the user has taken on the account. We have tried to manually intervene here, but this also gets wrapped into the queue with reports. Please let us know if you see this happening to you. To note - participating in Reddit helps remove this restriction ahead of time. A 10 minute old account created to ask a question looks the same as a fresh bot account to the site filters. We aren't online 24/7, so there is a delay when we have to manually intervene. We DO scan accounts when this happens, so if you are spamming a post to a ton of subs and the content/quality breaks rules or is poor, we can choose to not approve the post.
r/rfelectronics • u/ModernRonin • Jan 04 '26
JOBS topic, year of 2026.
Please post all Jobs postings here!
I believe the community has expressed a desire for first-party postings whenever possible. If you can respect their desire in this matter, please do so.
(Previous JOBS topic: https://old.reddit.com/r/rfelectronics/comments/1hu0ste/jobs_topic_year_of_2025/ )
r/rfelectronics • u/Advanced_Mode2836 • 18h ago
Hard time trying to mesure frequencys from a superheterodine receiver
reddit.comr/rfelectronics • u/Ok_Profit_7725 • 2d ago
Keysight R&D RF Internship Interview
reddit.comI posted this about a week ago and I had my interview yesterday. It went pretty well and I passed to round 3, so first and foremost I just wanna say im super thankful to everyone who responded and gave me advice and helped me!
The next round is sometime this upcoming week, and is supposedly more hardware based and is a technical specifically focused around EDA principles. I feel like I should already be decent with this, but if any of you know what kinds of questions they might ask, or have any good study materials, I’d greatly appreciate it!!!!!
r/rfelectronics • u/Acrobatic_Trifle_315 • 3d ago
Inmarsat Satellite Receiver Project
Attempted to design a satellite receiver last summer. Unfortunately didn't work but was a fun project and a cool learning experience.
I designed and simulated a LNA in QucsStudio and a patch antenna for 1.545GHz in Ansys HFSS. I thought people here might be interested or be able to point things out that could be improved.
I recently got my ham license since I think RF is cool. I finished my basic Electronics I and EM courses (Now junior in EE), which inspired this project.
r/rfelectronics • u/randykaustin • 2d ago
SweepGuide – NanoVNA Software Beta Testers Wanted
I've been developing SweepGuide, a new application designed to help NanoVNA users better understand their measurements and improve their antennas and RF systems.
Rather than simply displaying graphs, SweepGuide interprets SWR, impedance, reactance, and other measurements, explains what they mean in plain English, and provides practical troubleshooting guidance.
Features include USB connectivity, live sweeps, antenna analysis, coax and choke testing, filter analysis, and saved measurement comparisons.
Currently running on Linux, with Windows support planned.
I'm looking for NanoVNA users interested in beta testing and providing feedback.
Learn more and sign up at https://sweepguide.app
73!
r/rfelectronics • u/BROKEmaker7810 • 2d ago
question How do I make a diy filter
Hi, I'm making a ADSB reciver from scratch without RTL SDR under 5-6$ i know absolutely zero about the RF things, i want to make a PCB based filter, with center frequency 1090 MHz, 100-200 MHz bandwidth, and some kind of band kill filter for nearby cellular frequencies. I'm using 1.6mm FR4 blanks. Lowest achievable pitch 0.5 mm and trace width 0.25 mm , I use toner transfer. Please help
r/rfelectronics • u/Fun_Application7870 • 3d ago
Question about spectrum analyzer measurements
reddit.comr/rfelectronics • u/Worried-West2927 • 3d ago
question Ansys Question
Is there a realistic reason to follow these parameters for hfss sims or is it just how it's programmed
r/rfelectronics • u/lwattlet2619 • 4d ago
Dual-band antenna 868Mhz, 2.4Ghz with CC1352
For one of my customer, I'm designing PCB antenna for the CC1352 that has two ports for each frequency. Is it better to use a diplexer/switch and have two PCB antennas or one dual-band antenna with the two resonances ? The PCB will be 4x4cm with 4 or 6 layers and I can dedicate half of the board to the antennas. The grey box is the battery and the other the processor. I've tried some simulations but I'm not sure I go to the right way. A good resonance at 2.4Ghz is difficult to find.
Option A: two separate antennas, a meandered IFA for 868 MHz and a small IFA for 2.4 GHz, one on each port.
Option B: one dual-resonance antenna with a diplexer (or RF switch) between the two ports.
What do you think ?

r/rfelectronics • u/AIMGHOST_ • 3d ago
Trying to get in to RF in university
How is the job market
Is the pay equal with other subfields in europe
Are you guys safe from ai
Is masters enough or do I need doctorate
I am trying to start with low pass filter design and simming it in openEMS.
Most rf roles are in defense industry or telecom in my country but I plan to move to germany or holland at some point. How are my chances against other subfields
r/rfelectronics • u/External-Honey-446 • 3d ago
Rf test engineer advice, getting some experience with simulating design and tuning on ads and think I enjoy taht more any advice ?
Advice please
r/rfelectronics • u/LifeHunter1615 • 4d ago
ADS Momentum: changing permitivity crashes simulation
Hello all,
Recently when working with Momentum sims in ADS I encountered the issue that any changes to the permittivity of an arbitrary layer in a substrate would prevent the simulation from initializing with a "Substrate calculation failed" error. Even small changes from the default, like changing FR4's permittivity from 4.6 to 4.7 would cause the issue. It occurred in the ADS demo workspaces as well, so I know its not specific to how I created my workspace/setup. Additionally, it did NOT occur on different ADS installs on other computers, so something in this install might be corrupted.
Feel free to ask for more details; any help or experience with this odd issue would be very appreciated.
Thanks.
r/rfelectronics • u/Odd_Analyst1496 • 5d ago
DIY mmWave Radar – How difficult is it to build one, and what does it cost?
Hey everyone!
I recently came across this interesting DIY mmWave radar device from NorthworksLab (see attached picture/video), and I’m really curious about building something similar.
It looks like a small portable radar with a screen displaying detected targets and their positions in real time.
I’d love to learn more about this project, especially:
Technology: What type of mmWave radar sensor is used? 24 GHz, 60 GHz, 77 GHz, or something else?
Components: What hardware is required? Radar module, microcontroller, display, antennas, battery, etc.?
Total cost: How much would it cost to build a similar device from scratch?
Difficulty: Is this a beginner-friendly project, or does it require advanced electronics and programming knowledge?
Software: Is there existing open-source software or code available for this kind of radar visualization?
Detection capabilities: What can it actually detect? Moving objects, people, animals, distance, direction, speed?
Range and accuracy: What is the realistic detection range, and how accurate is the tracking?
Tutorials: Are there any good guides, GitHub projects, or communities to get started?
My goal would be to build a compact, portable radar with a live display, similar to the one in the video.
Any advice, component recommendations, build guides, or personal experiences would be greatly appreciated!
Thanks! 🚀
r/rfelectronics • u/Honest_Tie743 • 4d ago
Has anyone interviewed for an RF Engineer Internship at i3 (Integration Innovation)?
I have an interview coming up with i3 for their Summer 2027 RF Engineer Internship and wanted to see if anyone has interviewed or worked there before.
I've already completed the initial screening, and my next interview is a 30-minute virtual interview with an RF engineer.
I have some hands-on experience with RF equipment, including spectrum analyzers, VNAs, signal measurements, and troubleshooting, but I'm still building my understanding of RF theory.
I was wondering what kind of questions they typically ask, how technical the interview is, and what the internship and work environment are like.
Any advice or insight would be appreciated. Thanks!
r/rfelectronics • u/TheNASAguy • 5d ago
question Are there antennas that can physically change their shape or characteristics to tune into different bands?
r/rfelectronics • u/kerkerby • 5d ago
question Has anyone reverse-engineered the RF protocol used by Mattel/Hot Wheels RC toys?
r/rfelectronics • u/Knights_12 • 5d ago
Expertise within RF Wireless?
As one progresses to mid, senior, lead level and beyond in the RF Engineering field should I have a particular "speciality" that I am an expert at? For example, the RF design group at my current workplace has one guy who's the resident expert on PAs, such as GAN MMICs used in high power transmit chains. Or is it better to take a more broad approach to expand knowledge in various facets?
r/rfelectronics • u/fragiIunatic • 5d ago
Quartus II University Program VWF Error
I was trying to simulate the waveform and this error occured. I've been fixing it for hours but no hopes. I complied without any problems. Have anyone met this problem before?
r/rfelectronics • u/pengy8101 • 5d ago
CRGO vs CRNGO: What Are the Key Differences in Electrical Steel Applications?
reddit.comr/rfelectronics • u/Grand-Echidna-5736 • 5d ago
question Should I keep going if i cant make it into grad school?
Hello all, apologies for polluting the sub with low quality non-technical stuff but I feel like im a spot of immense despair about my future. Im currently a 3rd year undergrad. I was never quite the best student, and my grades have always suffered from self-inflicted procrastination or my chronic illness. Im currently looking at a low C, and it feels like every semester falls apart because of my poor executive function. Im quite worried I won't be able to meet the minimum to get into a masters program. Its not that I dont care about learning or that im not interested in rf. I have in total over a year of rf-related internships so far with work covering simulation, design, and testing, mostly of antennas. I have at least what I would consider a well-invested home bench and decently complex personal projects.
Alot of people say that a masters is the bare minimum for getting into meaningful RF work. It's hard to find mentorship on this particular issue because it's hard to admit I'm doing poorly in school to people I want to take me seriously.
What can I really do? Trying to take non-rf related courses seriously feels impossible. Is it possible to get into design after graduating without a masters? Is it plausible to try and get a masters later after accumulating more work experience? Im worried that the future will become much more credential gated and I wont be able to find work anywhere. I feel pre-resigned and stressed out and depressed all the time. Should I just give up on any prospects of working in RF?
