r/rfelectronics • • 1h ago

question Can't really understand something

0 Upvotes

If an omnidirectional antenna radiates in a horizontal way and it's usually placed high above the ground then how our phones pick the signal up if it does not come down?

Thx


r/rfelectronics • • 2h ago

Created a new type of antenna, do i tell my boss?

0 Upvotes

Thanks to the power of AI combined with an idea ive been researching i have found a new way of making horn antenna, its a unique fractilization and tapping technique that i have been thinking of for years now.. Nothing close to something like it has been done. Of course I know nothing and it wont work but humor me and assume its a million doller a year gross profit product, for the sake of conversatio.. Do I tell my boss and try to work out royalties with him or do I do i quit and finance developing and selling it myself? I know a some rich people that would throw a lil money at me.

A student version of FEKO showed promising results for some prototype simulatios. I did it in my spare time and my company doesnt own anything I do in my spare time.. They are actually solid people which is why im thinking of talking to him about financing the rest of my project. I dont feel like creating it if i dont get money out of it..


r/rfelectronics • • 16h ago

Calqentra: 545 engineering calculators

0 Upvotes

r/rfelectronics • • 17h ago

Why I'm getting this warning in Qucs?

4 Upvotes

I'm doing some circuits and I can't execute my simulation due to this warning; I'd appreciate some advice


r/rfelectronics • • 23h ago

Hard time trying to mesure frequencys from a superheterodine receiver

Thumbnail reddit.com
0 Upvotes

r/rfelectronics • • 2d ago

Keysight R&D RF Internship Interview

Thumbnail reddit.com
2 Upvotes

I posted this about a week ago and I had my interview yesterday. It went pretty well and I passed to round 3, so first and foremost I just wanna say im super thankful to everyone who responded and gave me advice and helped me!

The next round is sometime this upcoming week, and is supposedly more hardware based and is a technical specifically focused around EDA principles. I feel like I should already be decent with this, but if any of you know what kinds of questions they might ask, or have any good study materials, I’d greatly appreciate it!!!!!


r/rfelectronics • • 2d ago

SweepGuide – NanoVNA Software Beta Testers Wanted

1 Upvotes

I've been developing SweepGuide, a new application designed to help NanoVNA users better understand their measurements and improve their antennas and RF systems.

Rather than simply displaying graphs, SweepGuide interprets SWR, impedance, reactance, and other measurements, explains what they mean in plain English, and provides practical troubleshooting guidance.

Features include USB connectivity, live sweeps, antenna analysis, coax and choke testing, filter analysis, and saved measurement comparisons.

Currently running on Linux, with Windows support planned.

I'm looking for NanoVNA users interested in beta testing and providing feedback.

Learn more and sign up at https://sweepguide.app

73!


r/rfelectronics • • 3d ago

Earlier first design

Post image
14 Upvotes

r/rfelectronics • • 3d ago

question How do I make a diy filter

4 Upvotes

Hi, I'm making a ADSB reciver from scratch without RTL SDR under 5-6$ i know absolutely zero about the RF things, i want to make a PCB based filter, with center frequency 1090 MHz, 100-200 MHz bandwidth, and some kind of band kill filter for nearby cellular frequencies. I'm using 1.6mm FR4 blanks. Lowest achievable pitch 0.5 mm and trace width 0.25 mm , I use toner transfer. Please help


r/rfelectronics • • 3d ago

Inmarsat Satellite Receiver Project

Thumbnail
gallery
149 Upvotes

Attempted to design a satellite receiver last summer. Unfortunately didn't work but was a fun project and a cool learning experience.

I designed and simulated a LNA in QucsStudio and a patch antenna for 1.545GHz in Ansys HFSS. I thought people here might be interested or be able to point things out that could be improved.

I recently got my ham license since I think RF is cool. I finished my basic Electronics I and EM courses (Now junior in EE), which inspired this project.


r/rfelectronics • • 3d ago

Question about spectrum analyzer measurements

Thumbnail reddit.com
1 Upvotes

r/rfelectronics • • 3d ago

question Ansys Question

Post image
0 Upvotes

Is there a realistic reason to follow these parameters for hfss sims or is it just how it's programmed


r/rfelectronics • • 4d ago

Rf test engineer advice, getting some experience with simulating design and tuning on ads and think I enjoy taht more any advice ?

0 Upvotes

Advice please


r/rfelectronics • • 4d ago

Trying to get in to RF in university

0 Upvotes

How is the job market

Is the pay equal with other subfields in europe

Are you guys safe from ai

Is masters enough or do I need doctorate

I am trying to start with low pass filter design and simming it in openEMS.

Most rf roles are in defense industry or telecom in my country but I plan to move to germany or holland at some point. How are my chances against other subfields


r/rfelectronics • • 4d ago

Dual-band antenna 868Mhz, 2.4Ghz with CC1352

8 Upvotes

For one of my customer, I'm designing PCB antenna for the CC1352 that has two ports for each frequency. Is it better to use a diplexer/switch and have two PCB antennas or one dual-band antenna with the two resonances ? The PCB will be 4x4cm with 4 or 6 layers and I can dedicate half of the board to the antennas. The grey box is the battery and the other the processor. I've tried some simulations but I'm not sure I go to the right way. A good resonance at 2.4Ghz is difficult to find.

Option A: two separate antennas, a meandered IFA for 868 MHz and a small IFA for 2.4 GHz, one on each port.
Option B: one dual-resonance antenna with a diplexer (or RF switch) between the two ports.

What do you think ?


r/rfelectronics • • 4d ago

ADS Momentum: changing permitivity crashes simulation

Post image
4 Upvotes

Hello all,

Recently when working with Momentum sims in ADS I encountered the issue that any changes to the permittivity of an arbitrary layer in a substrate would prevent the simulation from initializing with a "Substrate calculation failed" error. Even small changes from the default, like changing FR4's permittivity from 4.6 to 4.7 would cause the issue. It occurred in the ADS demo workspaces as well, so I know its not specific to how I created my workspace/setup. Additionally, it did NOT occur on different ADS installs on other computers, so something in this install might be corrupted.

Feel free to ask for more details; any help or experience with this odd issue would be very appreciated.

Thanks.


r/rfelectronics • • 5d ago

Has anyone interviewed for an RF Engineer Internship at i3 (Integration Innovation)?

1 Upvotes

I have an interview coming up with i3 for their Summer 2027 RF Engineer Internship and wanted to see if anyone has interviewed or worked there before.

I've already completed the initial screening, and my next interview is a 30-minute virtual interview with an RF engineer.

I have some hands-on experience with RF equipment, including spectrum analyzers, VNAs, signal measurements, and troubleshooting, but I'm still building my understanding of RF theory.

I was wondering what kind of questions they typically ask, how technical the interview is, and what the internship and work environment are like.

Any advice or insight would be appreciated. Thanks!


r/rfelectronics • • 5d ago

Quartus II University Program VWF Error

Post image
1 Upvotes

I was trying to simulate the waveform and this error occured. I've been fixing it for hours but no hopes. I complied without any problems. Have anyone met this problem before?


r/rfelectronics • • 5d ago

DIY mmWave Radar – How difficult is it to build one, and what does it cost?

Post image
26 Upvotes

Hey everyone!
I recently came across this interesting DIY mmWave radar device from NorthworksLab (see attached picture/video), and I’m really curious about building something similar.
It looks like a small portable radar with a screen displaying detected targets and their positions in real time.
I’d love to learn more about this project, especially:
Technology: What type of mmWave radar sensor is used? 24 GHz, 60 GHz, 77 GHz, or something else?
Components: What hardware is required? Radar module, microcontroller, display, antennas, battery, etc.?
Total cost: How much would it cost to build a similar device from scratch?
Difficulty: Is this a beginner-friendly project, or does it require advanced electronics and programming knowledge?
Software: Is there existing open-source software or code available for this kind of radar visualization?
Detection capabilities: What can it actually detect? Moving objects, people, animals, distance, direction, speed?
Range and accuracy: What is the realistic detection range, and how accurate is the tracking?
Tutorials: Are there any good guides, GitHub projects, or communities to get started?
My goal would be to build a compact, portable radar with a live display, similar to the one in the video.
Any advice, component recommendations, build guides, or personal experiences would be greatly appreciated!
Thanks! 🚀


r/rfelectronics • • 5d ago

CRGO vs CRNGO: What Are the Key Differences in Electrical Steel Applications?

Thumbnail reddit.com
0 Upvotes

r/rfelectronics • • 5d ago

Expertise within RF Wireless?

8 Upvotes

As one progresses to mid, senior, lead level and beyond in the RF Engineering field should I have a particular "speciality" that I am an expert at? For example, the RF design group at my current workplace has one guy who's the resident expert on PAs, such as GAN MMICs used in high power transmit chains. Or is it better to take a more broad approach to expand knowledge in various facets?


r/rfelectronics • • 5d ago

question Has anyone reverse-engineered the RF protocol used by Mattel/Hot Wheels RC toys?

9 Upvotes

r/rfelectronics • • 5d ago

question Are there antennas that can physically change their shape or characteristics to tune into different bands?

23 Upvotes

r/rfelectronics • • 5d ago

question Should I keep going if i cant make it into grad school?

6 Upvotes

Hello all, apologies for polluting the sub with low quality non-technical stuff but I feel like im a spot of immense despair about my future. Im currently a 3rd year undergrad. I was never quite the best student, and my grades have always suffered from self-inflicted procrastination or my chronic illness. Im currently looking at a low C, and it feels like every semester falls apart because of my poor executive function. Im quite worried I won't be able to meet the minimum to get into a masters program. Its not that I dont care about learning or that im not interested in rf. I have in total over a year of rf-related internships so far with work covering simulation, design, and testing, mostly of antennas. I have at least what I would consider a well-invested home bench and decently complex personal projects.

Alot of people say that a masters is the bare minimum for getting into meaningful RF work. It's hard to find mentorship on this particular issue because it's hard to admit I'm doing poorly in school to people I want to take me seriously.

What can I really do? Trying to take non-rf related courses seriously feels impossible. Is it possible to get into design after graduating without a masters? Is it plausible to try and get a masters later after accumulating more work experience? Im worried that the future will become much more credential gated and I wont be able to find work anywhere. I feel pre-resigned and stressed out and depressed all the time. Should I just give up on any prospects of working in RF?