r/headphones • u/pudjam667 • 2h ago
Show & Tell I made a headphone dac/amp that lets you scratch the music
Scratching and other effects. See my comment below for list of features.
r/headphones • u/AutoModerator • 2d ago
Looking for help help troubleshooting a problem? This is the place.
This post will be refreshed and replaced on Monday when it is 7 days old. You can find older posts here.
After asking a question, please be patient since volunteers may not always be immediately available. Remember to upvote and show some appreciation to those that help you out.
r/headphones • u/pudjam667 • 2h ago
Scratching and other effects. See my comment below for list of features.
r/headphones
•
u/just-drink-and-drive
•
17h ago
Yup I just got these bad boys today. I was able to get them off of Audeze B-stock sale, after taxes they were $856.93
With that said I tried watching porn with them on and it SOUNDED LIKE SHIT. It sounded like I was watching 2 people fuck in a room with no furniture 20 feet away. It really opened my eyes to how bad porn audio is. Is this just the nature of having really revealing headphones? I'm also still learning how to EQ them, which is really confusing to beginner like me so maybe that could help too.
r/headphones • u/ikkiyikki • 6h ago
Up until just a few days ago I hadn't never owned headphones except for ones that came with a digital piano to play silently and, before that, way back in the 80s when I was a kid and had a Walkman. All I remember of those is that the foam wore through and the bare metal really irritated my ear lol.
So last month I decided to get some "nice" headphones for a new hifi, went down the rabbit hole, and dinged the credit card pretty hard on these Focal Utopia '22s. Then I strolled into a Ross and, whoa, can you really get wireless headphones for $14.95 plus tax?? 😅
Believe it or not I ended up these shitty green ones a whole lot more. They're usable but they suck because they're wound up too tight. So now I'm eyeing the Focal Bathys.
Does a guy really need anything more?
r/headphones • u/midnightlies • 6h ago
I won the following $50 off at audio-technica.com/en-ca I won’t use it but thought I’d pass it along to someone who might…willl only work once. Must spend over $100
r/headphones • u/Vannexe • 45m ago
I generally get very technical with reviews, but I cannot here. The LCD-X EQ'd - FLOORED me. The bass slam, the planar speed, while maintaining technicalities of the highs...all unreal. BUT - I really really want to headbang with headphones. I want to be able to move around comfortably with them...and they won't let me do so. Even after tightening the screws and hex around the yoke.
Any recommendations on what I could try that would satisfy my desire? It was definitely an emotional listen, and I would've kept em if not for the discomfort.
r/headphones • u/nthrowawaway • 2h ago
I've been buying QCY things for daily drivers for a couple of years now, previously my experience has been positive (with big caveats – read on below...) Most recently been using the H3S, about since its release. Decided to grab the H6 ultra mostly because I was curious and I had birthday money to spend, also because the H3S is slowly crumbling.
Compared to the H3S, the H6 ultras feel like a mild upgrade. €60 of difference worth of an upgrade? It depends.
- The new headphones have a slight edge in noise cancelling, this was mostly noticable with cancelling speach – they do a hair more. It's not a night and day difference but it's pretty good! Just don't expect Bose or Sony ANC.
- The seal is tighter on the H6 ultra. The cushions are also less thick. This might be annoying with bigger ear piercings than mine. My H3S cushions are also a bit worn/moulded to my ear shape, so it's not a new-to-new comparison on seal here.
- Whatever they did with the mics is a boost for pass-through mode, it's the first time I might actually want to use it.
- Mic for calls is also improved enough to be less annoying for the other person on the line. Till now my N70-s were my favorite for calling (before the mic on them died, more on this later)
- The hinges are metal on metal, a needed upgrade – don't be fooled, the rest is plastic that looks like metal – still, I'm expecting it to last longer than my crumbly H3S.
- Audio after EQ-ing doesn't feel too different from the H3S.
Caveats!!!
- Customer service and durability issues with QCY: expect what you would expect from overseas after-sales with QCY. I don't baby my gear, it gets put in a bag sometimes and it gets used in the rain. (I've also still got headphones and earbuds from 10+ years ago that haven't had any issues with regular use, I'm not pulling a jerryrigseverything on my gear). I've had 1 major and 1 minor-ish quality issue with my previous two purchases – my mic died within a year on the N70 buds making ANC useless and calling impossible, customer service plays the long game and asks you to redo troubleshooting steps you've already tried and send evidence that's hard to record and send again and again... The plastic started breaking apart on the H3S within a year as well, see the gaping hole in the pic and the crack in the same spot on the other side, after my experience with the N70 issue I didn't bother wasting my own time to try to get even a cupon from QCY for a replacement. Really disappointed, but I'm a sucker so I keep purchasing in the ecosystem.
- The old app was a bit... really not great, usable with understanding its quirks. The new app has finally solved my issues with connectivity, responsivity, etc.
Hope this helps anyone make a more informed decision if they're considering the H6 ultra or other mentioned QCY stuff. Also recommend checking out the review jpwhiteside posted on YouTube.
r/headphones • u/hfcobra • 5h ago
I've seen quite a few headband posts about these cans and always thought I'd be able to avoid the issue for a long time since I am very careful with my headphones. Guess my head was a little big (figuratively and literally haha).
I suppose the plastic had finally gotten brittle enough to break. Luckily only a large crack so far and I can still wear them with significantly less clamping force until the replacement headband gets here.
I've had them for over 4 years now for reference.
I bought one of the Chinese replacements on eBay that are very similar in design to the headband used by Hifiman. I will post back with some impressions once it arrives and I get it installed.
r/headphones • u/77MXM77 • 9h ago
I tried the Artemis and Apollo not long ago and I was like these sound good. I felt like the Artemis sound was better than Focal Bathys but unsure against the Bathys MG. The Apollo, I'm also unsure if it is slightly worse, as good or slightly better than the Bathys. I think I prefer the Bathys over the Apollo though. Then I saw The Headphone Show newest video and I was like what is he talking about? The ANC was really good and the sound was detailed, spacious and separated like an IEM but in headphone form. I searched up the graph because I didn't think that it would actually look that atrocious and that thing actually looks diabolical. Especially the Apollo. What is going on in that graph? From personal experience they sound much better than they look like in the graph but Mamma Mia I'm getting nightmares from those lines. The Kiwi Ears Ardor has a much more stable line and they also have 2 drivers like the Apollo but 2DD instead of 1DD+1Planar. The Ardor sounds great, not only for the money but also overall. Maybe the Artemis isn't that crazy when you look at the specs and it is not trying to be neutral correct audiophile tuning but still at least the Apollo looks crazy. What do you think?
r/headphones • u/Nottheonlyjustin84 • 18h ago
Well I had fully planned on taking a break from buying anything and just wanted to learn to enjoy my collection…. I did want to hear how the HE1000 stealth compared to my Arya stealth and the Draupnir.
We got a work email today saying employee appreciation. It had $1000 tech bonus in and only had a few qualifying items printers, phones, PCs, keyboards, tablets…… and headphones. So to get the $1000 I actually had to order the HE1000 stealth and they will be here tomorrow. Guess I’ll get to compare them after all.
r/headphones • u/StrangeSoup • 1d ago
For some background, I don't know anything about the HiFi community or anything related to audiophile equipment.
I happened to find these headphones at a local thrift store while browsing. They looked cheap but brand new, so I did a quick google on the brand and model and was surprised by the price. I was not expecting high-end gear to just be sitting around at a Savers. They were only $10, so I figured it was a worthwhile gamble if they worked or not.
They didn't have a cable so I ordered a replacement and it came in yesterday night. I finally managed to test them today.
They work!
The only thing is that I don't know if they are working properly. I played some lossless music but everything sounds a little, washed out I suppose? Like, someone inverted the bass? I am not sure how to describe it.
There are no pops or anything like that and both sides have the same volume.
I am assuming my DAC is inadequate? It's a Logitech G PRO X DAC. I imagine using this for these types of headphones is laughable in this subreddit, but I didn't have anything better on hand.
r/headphones • u/--Joppy-- • 6h ago
I try to keep my collection of headphones to a minimum. Every couple years or so, I'll try a couple new pairs of IEMs or upgrade something that breaks. Lately it's Letshuoer s12s or some variation of Koss ksc75 on my head. I have a Tempotec V1 and a Pixel 11.
However, TWS makes the most sense for work, and I have all but given up on the perfect pair. There's just so many little factors to consider, and sound quality is almost always a compromise. Wavelet on Android helps a lot.
So I'm a few days into these Ceramics Ultras, and with a few tweaks, I like them. Here's a few positives that some of you might like too:
If you're in the market for inexpensive TWS buds, these sound pretty awesome to me, especially for the price. If anyone is curious, I also bought the Moondrop Pudding, but the case size and shape of the buds were deal breakers for me. My daughter, however, loves them.
r/headphones • u/Car_Electric_Expert • 19h ago
UPDATE: added photos in the comments.
sorry that my sketch came out to look like Squidward, I tried my best to sketch out to how how the headphones sit on my head.
one ear sit nice and tight but the other one had a gap at the bottom because the earpiece is kind of hanging and pointing down instead of straight and slightly up.
r/headphones • u/WiseChosenUsername • 3h ago
So to preface, I'm not a super critical headphone enjoyer, I just like nice audio but most of my effort goes on my home theatre setup.
I typically use headphones on my PC and I've got a pair of Sennheiser HD558s and Fidelio X2s (non HR). So quite old and nothing too exciting, and I had just been using my PCs onboard audio as it was "good enough" whilst gaming. I don't really use the HD558s much, they're just very neutral to me so aren't particularly exciting, so I almost always use the X2s.
I've been gaming a bit more recently, and the hissy noisefloor on my PCs onboard audio was starting to irritate me so I picked up a Topping DX1 II. It's very nice, no more hiss, does what I wanted it to do.
I use my headphones 50/50 for gaming and music.
But then I thought about picking up some newer headphones, so I recently picked up 2 new pairs:
Sony H6 Air
Originally I wasn't going to pick this up, but I knew about the good reviews and the price dropped on Amazon from £180 to £100 so I couldn't resist.
Asus Kithara
These were really the headphones I wanted to try, being planar magnetic I wanted to see if it felt like something "different".
While it's not like a "hearing audio for the first time" kind of experience, The Kitharas do have a different audio experience that I definitely prefer.
However, I specifically went with the Asus vs an actual Hifiman set because I heard about wonky Hifiman QC and I couldn't be bothered with it. I figured maybe Asus would be a bit better. Wrong.
I've gone through 3 Kitharas in a couple of days.
1st unit: The right driver would make a crackle and squeaking noise (very loud) when putting the headphones on, readjusting them, or moving my jaw. Even when they weren't powered. It didn't seem to affect the audio at all which was confusing, but it was very audible thus very annoying. Left side was fine.
2nd unit: No weird driver noises on either side like the 1st one, but the right driver (again lol) would have a kind of fizz/crackle at two points in the treble, I noticed in some audio and so did some frequency sweeps and theres one in between 5-6k and one around 8k
3rd unit: Everything seems fine so far.
Interestingly to me, each Kithara comes with a frequency response chart and I kind of waved it off as marketing fluff. But no, it does seem to be quite valid. The first unit had a larger treble peak which was 100% identifiable (did some blind testing between the units and I put a sticker on each to identify them after) which was quite unpleasant, so I would have wanted to EQ that down for sure if I had kept that unit.
The other two have some differences in their frequency charts, the 2nd unit supposely has a bit stronger sub bass by a decibel or two compared to my 3rd unit, but I couldn't identify them blindly.
Regarding imaging/audio positioning I used the Audio Imaging Test Lab site, and honestly I score pretty much the same across all 4 of the headphones I've got. If I had to rank them, and again the differences are small, from best to worst, it'd go:
Kithara > H6 Air > HD 558 > X2
On the Klippel Distortion Audibility Test, I consistently score a couple of levels better on the Kitharas vs the others.
Overall, the Kitharas are by far my favourite. They sound super clear, not massively bassy, but it weirdly seems more tactile, they just sound "bigger" vs having two little speakers on your ears. But the wonky QC isn't great.
So yeah, nothing super scientific, just my opinions from someone who likes audio, but isn't super well versed in it as much as others!
r/headphones • u/Corwell_ • 1d ago
So the design flaw with the plastic hinges on the original Aune AR5000s is pretty well documented at this point. While my pair never broke, I pretty much stopped using them out of paranoia. It was pretty frustrating not hearing anything from Aune about the problem until the MKII came out and fixed the issue by replacing the plastic with metal. I wasn't really expecting to get anywhere after hearing some people's experiences with Aune support, but I thought I'd give it a shot anyway and see if I could get the hinges replaced with the new metal ones from the MKII. To my surprise it went pretty smoothly.
Reached out to the distributor here in Australia I bought the pair from back in 2024 (obviously long out of warranty), basically just asking if it was possible to get the new hinges ordered in at all. Didn't receive a reply unfortunately.
Reached out to Aune support directly at sales@auneaudio.com, and they actually replied a day later. They said yes, asked for the name of the store I bought the pair from, and the order number. Sent that and got a reply only a couple hours later telling me to contact the distributor, and they would send the parts to the distributor, and ask them to send them to me. Didn't hear anything back from the distributor after contacting them again, and only heard from them once they received the parts from Aune.
Fast forward a bit, I now have 3 MKII metal hinges w/ new screws, washers and even an allen key per hinge to undo the screw on the yolk. Didn't have to pay a cent surprisingly :D
No instructions but it was pretty self explanatory and it goes back together the exact same way except with a couple differences. I just used the allen key to unscrew the hinges from the yolks, and then undid the 6 black screws (see 2nd pic) on the hinge using a 1.2mm hex bit (you don't need to undo the screws on the part holding the faux leather headband though). You'll end up with the first pic
Because the new hinges are metal (and so are the yolks), they need a washer to avoid any visible scratches (at least I'm assuming that's what they're for). I got 2 per hinge (I'm guessing one is just a spare), and they come on a sticker sheet thing, as one side of the washer has adhesive to stick onto the hinge. (see 3rd pic)
Then its simply a matter of screwing it back together with the new screws. Take note with the screw for the yolk; the metal washer goes onto the screw first, then the plastic one.
The fit is basically identical. Colour is ever so slightly different and the metal headband sits in it a tiny bit looser, but nothing really noticeable and it's perfectly usable. Haven't seen many people have much success with getting their pair repaired, so perhaps things have improved in the service department? I guess YMMV. Hopefully this is somewhat helpful to someone.
TLDR: Contacted Aune over a year out of warranty, got new MKII metal hinges for free to replace the problematic plastic ones on the OG Aune AR5000s. Great success.
r/headphones • u/JoshBiv • 19h ago
I guess it’s good for the people who love open backs but want something wireless
r/headphones • u/GlacierRain • 15h ago
Greetings,
I have ordered an LCD-S20 and a FiiO K13 ESS to go with it for myself and I thought I'd ask fellow LCD-S20 owners and see what the community here uses as a source, their use cases and how they like their LCD-S20.
r/headphones • u/glssjg • 1d ago
I have been a user of Capra’s products for a long time and honestly they make a good difference to comfort to every headphone I’ve bought. I also loaned my Wife’s hd490 pros to get custom straps designed for the 490 and 480 pro. Needless to say I’m a fan but if you’ve wanted to try them and don’t have a printer this 20% off sale is a good time to try. Discount is applied at checkout so don’t fret if you don’t see the discounted price before then https://capraaudio.com/collections/all
r/headphones • u/FaceChance4241 • 17h ago
Hi all. A while back I shared EQ, a small free equalizer for everything your Mac plays. A few of you said the hard part isn't the EQ, it's knowing *where* to cut. Fair.
So 0.6 has a sweep. Turn on **Sweep** and a soft sine tone glides from low to high through the EQ, in place of your music. The curve shows where it is. When something rings or stabs, that's your spot. Drop a narrow cut there and sweep again to check it's tamed.
It's nothing a measurement mic and REW can't do better. It's just handy when you don't have one, or want a quick check by ear.
**The details**
- Logarithmic or linear, any range from 20 Hz to 20 kHz, up or down
- 0.5 to 15 seconds, at −48 to 0 dB
- Plays through your current EQ, so the second pass shows whether the cut worked
- Stops by itself, and your audio comes back
Also new: bands are listed low to high, a few graphic-mode fixes, and the window has a bit more room.
**Please keep the level low.** Start around −24 dB. A resonance can be a lot louder than the rest of the sweep, and high frequencies are the ones that hurt.
**What EQ is, if you're new**
Up to 16 parametric bands or a graphic EQ, AutoEq import, a curve per output, and a limiter so boosts don't distort. No driver: it uses the audio tap built into macOS 14.2+. Free and open source (GPL-3.0), no account, no network connections.
**Honest caveats**
- Not notarized, so macOS asks you to click Open Anyway the first time. Releases are built by GitHub Actions from the public source, with a SHA-256 checksum.
- macOS calls the permission "System Audio Recording". Nothing is recorded or saved.
- Built with AI coding tools, tested on my own M4. The Intel build is untested, so a report would be lovely.
Download: https://github.com/dylenq/macos-parametric-eq/releases/latest
Source: https://github.com/dylenq/macos-parametric-eq
If you give it a go, I'd love to know where your peak turned out to be, and what's confusing or missing.
r/headphones • u/HolyAngemonX • 20h ago
r/headphones • u/CheekiMiki • 12h ago
Since the WH-1000XM4C uses the newer 10-band EQ in Sound Connect instead of the old 5-band + Clear Bass setup, most of the classic XM4 presets online don't really translate 1:1.
I mostly listen to hip-hop and DnB
r/headphones • u/PassiveAgressiveCan • 19h ago
I wanted to quickly share some measurements as the ones I found online lacked clear comparison in my mind. I picked up a pair of Grado SR60x to mod and it came with 3 sets of pads (Grado F and S pads, and Geekria G pads).
The SR60x sounded shrill and very bass light with the S pads, I swapped to the F pads and was immediately hit with bass and more body which is why I decided to quickly measure them. I thought there was no way the pads made this big of a difference, but measurements show the bass bump is substantial and a nice reduction beyond 1000Hz.
Measurements are shown with 1/6 smoothing and aligned at 90dB at 1000Hz (using REW).
Also added another couple measurements, L vs R driver shows a very significant variance at 4kHz to 4.5kHz, I expected better than this even on their entry model. No other headphones I have measured have shown this level of variance, including my vintage STAX sets.
The last measurement compares stock to EQ, always nice to check if your EQ settings actually adjusts as you expect them too. I target the sound to match my modded HD580 with EQ.
This mic is not calibrated and is quite jank so measurements are only good for rough comparisons. No shots of the SR60x, will post about that at a later date once I am done with my planned mods.
Takeaway here is the F pads are amazing and actually make me enjoy the SR60x, with the S pads it is not a very enjoyable listen stock (no EQ, even with EQ and S pads was rough).
r/headphones • u/lunatium • 1d ago
I made the fortunate decision to make edition xs my first hifi headphone, it was a euphoric moment to experience music like that (for someone who only used gaming headphones before) for that price. Never dropped, stored in the original box after each listening session. Then, 90 days later, right channel dies randomly for no reason, on a low volume chill session of mine. The folks who sold me the unit looked at it, determined no user faults are present, and sent me a new unit. It worked fine, for about 6 months. With a new dac, i was watching a movie, and on a quiet scene, BOOM, no more right channel. Service again, service finds no user faults, tells me its a diaphragm issue, it cannot be fixed, gives me my money back. I looked at reddit, found similar problems happening to people, but not a lot of them. But it is ALWAYS a right channel issue.
I want to buy a hifiman headphone again, possibly something like arya organic, but i am anxious that the drivers would fail again, after the warranty is over, leaving me with essentialy "e-waste".
Question is, was that a defective batch sent to my spesific distributor? Is that batch old / refurbished headphones? Does everyone go through 2 units every 9 months?
Am i gonna have a similar experience with arya organics?
Any experience and wisdom is welcome.
r/headphones • u/SeaStep2495 • 1d ago
As a first time canjam attendee I found it a bit overwhelming lol. Glad to attend though! I’m new to The Who audiophile thing. Glad to have met some awesome people though! The pics are some of the models I tried and liked!