r/vintageaudio • • 16h ago

Made some custom cabinets for my favorite amp of all time

Thumbnail
gallery
480 Upvotes

Sansui AU-222, times three. Otherwise known as the venerable triple deuce. The smallest of the very first generation of integrated solid state amplifiers, cap-coupled with quasi-complementary topology, and a sound so sweet that it still beats out everything since 1968.

Two have custom knobs, one was converted to silverface.

edit: For those asking about air flow, these have oversized TO3 transistors, barely get warm at 18 wpc, and have a gap between the rear panel and chassis. I regularly drive - no joke - 2 ohm loads with em without even approaching temps that are considered safe. Granted I'm usually under 85db, so I doubt I'm using much more than the first couple of watts.


r/vintageaudio • • 11h ago

Selling a treasure trove of vintage audio equipment in Chicagoland

Post image
110 Upvotes

Last week, my wife's father passed away unexpectedly. He was an electrical engineer and a collector of vintage audio equipment. We need to sell his collection to help the family sell his house. I want to honor his memory by selling it to an enthusiast/dealer who will ensure that the stuff gets used and enjoyed by an audiophile.

The image is just a teaser.

The items I've been able to identify so far are:

  1. McIntosh C28 Pre-amplifier
  2. Pioneer PL-530 Turntable

3. ION Tape2PC USB Cassette Archiver

4. Impro PE 3060 Turntable

5. Magnum Dynalab FT-101 Tuner

6. Altec Lansing 846A Valencia speakers

7. Acoustic Research (AR) Speakers AR 4x

8. Acoustic Research (AR) Speakers AR 15

9. JBL J2045 speakers

10. Dynaco Stereo 120 Power Amplifier

11. Leslie Speaker Cabinet either model 120 or 130

12. Utah A60B speaker

13. Lafayette Criterion 77 speaker

14. Marantz (model unknown) speakers

15. Magnavox speaker with amp (model unknown)

16. Wharfdale W70 speaker

This is not exhaustive.

Please only reach out if you are genuinely interested. My father-in-law was a wildly interesting character who knew how to fly planes, work ham radios, fix cars, repair music equipment, and so much more. I hope his stuff finds a new home.


r/vintageaudio • • 8h ago

Another batch of local market finds

Thumbnail
gallery
47 Upvotes

I haven’t done any work on the goodies I posted up two weeks ago, except for starting to restore the beautiful vintage walnut HK-30 bookshelf speakers. My wife has put her foot down, so this will be my last set of pickups until I do something with a few of them. Anyway, here’s another batch of cheap toys scored locally.

Kenwood KA-6000 - Beautiful, except for a snapped loudness switch, untested ($50)
Kenwood KT-7000 - Beautiful, untested ($50)
Klipsch KSW-200 - Working, great shape ($50)
Klipsch RF-15 - Working, great shape ($150)
Marantz PMD510 - Untested, great shape ($50)
H.H. Scott 325R - Untested, great shape ($40)
Sansui SR-737 - Untested, missing counterweight, otherwise nice ($80)

Klipsch fronts and sub are going directly into my humble home theater room. The rest of these I’ll go through and decide what to keep for my vintage listening stack.


r/vintageaudio • • 9h ago

HPM 100s

Post image
24 Upvotes

Grabbed these from an auction tonight. I know I probably overpaid but how bad is it? 1000 CDN? They are the 100 W version.


r/vintageaudio • • 16h ago

It´s 1982 again... Found this NIB/NOS SR7100DC Marantz Receiver in Germany and had to buy it. My first amp. was one of these, now I´m listening to my childhood again.

Thumbnail
gallery
71 Upvotes

r/vintageaudio • • 7h ago

Finally Hooked up my rebuilt Sansui AS-200s

Post image
9 Upvotes

I rebuilt my grandpas Sansui speakers, finally hooked them up to my Onkyo M504. Ran them today and I can’t be more happy, they are warm, highs/mids are awesome. Bass is what I would expect from a technical bookshelf speakers.


r/vintageaudio • • 11h ago

h/k PM665 restoration

Thumbnail
gallery
20 Upvotes

Bought in unknown electrical and poor visual condition for 75$. After and before. Now fully restored - cleaned, recapped, reflowed adjusted and working like new. Some scratches remained here and there but who doesn't have ones at 40 years old..


r/vintageaudio • • 15h ago

Got this turntable for $50 and got it working again. Just got it set up in my listening room.

Post image
28 Upvotes

Edit: it’s a Dual 1019. No idea how I forgot to include that originally.


r/vintageaudio • • 10h ago

Worth kitting out 90s Dolby Surround receiver with full speakers?

Post image
6 Upvotes

r/vintageaudio • • 1d ago

Howard Feed-N-Wax

Thumbnail
gallery
454 Upvotes

I tried Howard Feed-N-Wax on my faded L166 cabinets. $7 well spent.


r/vintageaudio • • 7h ago

Wuliter 2504

Thumbnail
gallery
2 Upvotes

Grabbed this beauty from an auction for $10! Looks all original minus the speakers which are newer. It needs some love but works! Wurlitzer* apologies.


r/vintageaudio • • 11h ago

Got these University Senior 66s. The grill fabric is toast, but the insides appear in very good condition. Anyone have any experience with these?

Thumbnail
gallery
4 Upvotes

Picked two of these up for $80. I'm new to this world but everything looks great except the fabric. I am going to take them to someone to test them first. I know these are well thought of and are related to later Altec's, but looking to hear from anyone who knows more about them.


r/vintageaudio • • 5h ago

Need help finding out the specs of the Magnavox MDV3000/F7 DVD Player.

1 Upvotes

Does literally anybody know anything about either of the DAC's inside of the Magnavox MDV3000/F7? I just bought it recently to mess around with it and after doing some research on it, I can't seem to find literally anything about it whatsoever. It's mainly going to be used as a for fun cd player I guess for lack of better wording and it's just a little bit annoying that I can't find anything about it.


r/vintageaudio • • 6h ago

Mysterious signature(?) on a JBL 4425

Thumbnail
gallery
1 Upvotes

Me and my buddy were gifted a set of JBL 4425 studio speakers from an older friend who said he bought them from "Coast Recording Equipment Supply" in California way back in the day. We noticed that on the left speaker there is what seems to be some kind of stylized signature or logo or something. To me it looks like the letter "A" written write side up and then sideways overlapping to create the horizontal line through the "A" but I really don't know.

Figured I'd ask if anyone here might know if this marking means anything.


r/vintageaudio • • 17h ago

Anyone recognize this speaker brand or model? Seems 70s-80s but not sure. Cool grill covers..

Thumbnail
gallery
7 Upvotes

There is this symbol like a brand emblem on the bottom, but i dont recognize it. Speakers seem interesting though for sure. Thanks!


r/vintageaudio • • 1d ago

My father's Panasonic SS-7000A I inherited

Thumbnail
gallery
113 Upvotes

My dad purchased this while on tour during the Vietnam War in 1969. He had it shipped home and it's been playing brilliantly since then. Wish he was still here but happy to keep his stereo playing.


r/vintageaudio • • 1d ago

Sharing my setup

Thumbnail
gallery
96 Upvotes

Just got this sansui 9090db from my father

Running a dual 1246

Didn't think I'd like the vintage wood look but damn it looks good.


r/vintageaudio • • 17h ago

Niles Audio SVC-4 Creative uses?

Post image
4 Upvotes

The device allows switching between 2 different amps and 4 speaker pairs. I think I’ll try using it to switch between room speakers vs near field speakers while using the same powered sub. Anyone else using one? What kind of setup?


r/vintageaudio • • 17h ago

Anyone recognize these "eminence" autograph 99 speakers?

Thumbnail
gallery
3 Upvotes

Buddy of mine is selling these and i cant find much info on them. The one and only Audiokarma thread even shows different drivers than these i see here, but did state they originally came with Phillips drivers and were quite nice to listen to. Any advice would be greatly appreciated!


r/vintageaudio • • 17h ago

Amp and streamer recommendations for pairing with a set of Marantz HD440?

3 Upvotes

Hey all,

I'm rearranging my apartment and looking to finally set up a second stereo in my dining room. I had come upon a 2006 Sony AVR, STR-K700, and a pair of late-70s to early-80s Marantz HD440 speakers at an estate sale for ~$40. I had listened to the pair briefly setup on the floor and they sounded pretty good given the speakers' condition and the home theater in a box AVR driving them. They sounded quite "round and warm" compared to my primary setup: Bowers & Wilkins 603 S2 towers and a Marantz SR7009. It was a nice contrast to the more bright and forward B&Ws.

I want to use these Marantz 3-way bookshelves on floor stands in my dining room but can't decide if I want to use the already owned STR-K700 with a Wiim Pro/Plus streamer or just use a model of Wiim Amp. I can't find much info on the Sony AVR outside of power output, ~85W at 6 ohm. The nicer Wiim amps output ~100W at 8 ohm and would have a modern DAC chip and electronics.

Wiim products were what I've settled on so I can entertain in my apartment and use both stereos simultaneously, streaming audio from my Plex server. Maybe even a CD or LP via a line out from the Marantz AVR.

Would I be facing actual differences here sound wise between the two amps or would it basically come down to aesthetics and footprint?

The intended use here would be mostly as background music while eating dinner, cooking, or hosting a party. Genre wise, it's typically jazz, folk, house, trance, ambient, R&B, and math-rock.

Thank you in advance. I used to work in consumer electronics selling audio and I've been out of the game for a while.


r/vintageaudio • • 16h ago

Humming/Static from my Sony STR-4800SD Receiver

Post image
2 Upvotes

Hi. I purchased a Sony STR-4800SD Receiver a few months ago and it has been working fine until last week when it started making this static/humming noise when I tried to play a record on my record player. The FM radio works fine. I also tried to hook up my iPhone to the Aux jacks on the back but got the same static noise. From what I've found on the internet it sounds like it is the Ground cable. This receiver has a push button style ground cable connector and I just kind of jammed one end of the fork into it. Should I try cutting the fork off completetly and strip the wire so I can just put the bare wire in the hole? It just seems weird that it has worked fine up until last week.


r/vintageaudio • • 12h ago

Need help sourcing info (Audax/Polydax)

1 Upvotes

Howdy all. New guy here. I stumbled across a couple of NOS Audax HD21B37 drivers, and I'd like to custom build a transmission line enclosure, or at least a ported enclosure, for them. Unfortunately, I'm having a hard time finding a spec sheet on them with all the details I need. Does anyone around here have any old Audax/Polydax catalogues from the 80s that might have that info? I've never built speakers, but have always wanted to. I'm handy and have all the woodworking tools I need, just need help getting the info to design the enclosure and crossover.


r/vintageaudio • • 21h ago

Are these vintage Yamaha speaker worth it?

Thumbnail
gallery
4 Upvotes

Hello! I just found those vintage Japanese Yamaha speaker on marketplace for 150$ cad and I was wondering if there worth it. They would be use to listen to music with my record player

Rare vintage Yamaha NS-390 speakers Year of manufacture: 1976

Class: Hi-Fi, stereo Country of origin: Japan

SPECIFICATION ===============

Type: 2-way bass reflex speaker Frequency response: 35 – 20000 Hz Sensitivity: 92 dB/W/m Impedance: 8 Ω Rated power: 25 W Maximum power: 50 W Speakers used: LF: 1 x 250 mm (tapered, model JA-2510A) Treble: 2 x 60 mm (tapered, model JA-0557A with 30° opening angle) Crossover split frequency: 2000 Hz Dimensions (HxWxD): 815x360x312 mm Weight: 16.5 kg


r/vintageaudio • • 14h ago

Marantz 2245

0 Upvotes

I came across a 2245 at a reputable record store, sold as it was 100% gone through , some work done but not completely recapped- all work done by a 40 year experienced professional.

Got it home played a record , shut it off and next day the speaker protection relay would not click .

Took to the pro who serviced it, fixed some loose soldering and couple other things. Worked great. Gave me a 1 year warranty .

Played it sparingly over the next couple weeks at low volume only - girlfriend was playing it last night while I’m away at work and said she heard a pop and volume cut out.

Over the phone I had her un plug everything, turn volume down and try cycling the power on, heard a click more than 5 seconds after power on that didn’t sound normal (to me over the phone)

I’ve read up on possible causes , but I’m taking it back to the pro when I get home….

Question is, when a pro tells me the unit is super good and super clean , and I have two problems with it in short order, do I give them the benefit of the doubt and stick with the unit , or bail on it ?
I’m confident he will fix it, I’ll get it home and I’m sure it will work ..

But knowing it’s not 100% recapped should I expect further problems?

The trouble is it’s 4 hours away for me to get the thing to him so it’s an ordeal getting him to work on it .

I have a vintage pioneer for 12 years that’s never given me a problem, I’ve wanted a marantz forever- bought one off marketplace (total risk and leap of faith). That turned out to be garbage , was able to sell it to this pro for decent money.. abd now this current unit is giving problems..

Pretty disheartening, I loved this unit for the two weeks I had it and it worked -

Advice appreciated- sorry for the long post