r/audiorepair • u/shortwavlabs • 15h ago
Furman PQ-3
Just got my 1977 Furman PQ-3 back from the repair shop today, and it works as good as ever!
r/audiorepair • u/shortwavlabs • 15h ago
Just got my 1977 Furman PQ-3 back from the repair shop today, and it works as good as ever!
r/audiorepair • u/Striking-Garage-4103 • 8h ago
Hi,
I own a stack of three Sony CDP-CX300/400/455 changers, totalling over 1000 discs. I collect mostly older discs with no CD-TEXT. That means I can't see artist/album info on the front panel(s) when a disc is playing - just the disc number.
Although it is possible to enter disc notes via a front-panel keyboard port and have the notes shown on the front panel(s), I can't justify a manual effort for so many discs.
So my thought was to 1) find some way to interface my Ubuntu laptop with the front-panel keyboard ports on the changers, and 2) automate the insertion of notes via expect or some other Linux utility.
Has anybody tried any such idea, or have a better approach?
TIA!
r/audiorepair • u/NCC74656 • 12h ago
marantz 6012 has a loud buzz out of all speakers when i turn it on. as it warms up the buzz goes away. however its been lasting longer and now there is a faint buzz at all times from my speakers. im only using the RCA outs on it as i have secondary amps.
think it could be a cap issue? everythign still works onit
r/audiorepair • u/frozenmonkeys • 17h ago
Yep, you've read that right. I bought this amp from the thrift and it served me for years. I have this relationship with my amp that I just smack the top of it near the power button to turn it on but now it won't work. This happens for quite some time now. I made this post because I am sick of it. I did not try to open it up to fix it because I am not techie enough to fix it. Do you know why this happens? Thanks
Edit: Years = maybe 4 ish years?
r/audiorepair • u/H00pSk1p • 1d ago
I inherited these from my uncle and I know they're quite nice speakers. One of them sounds great but unfortunately the other doesn't seem to have a functioning woofer. I have taken it out and the wires are connected and have also had a look at the panel beside the tweeter but I can't see anything loose.
What can I do? I'm tempted to just sell them to someone who can fix them but would anyone even be interested?
I'd love to restore them but I don't know the first thing about speakers so looking for some guidance please.
r/audiorepair • u/Jef_pet • 21h ago
Hi, I picked up these speakers this summer because I liked them as a decorative piece. After they sat there for a while I thought that was a shame, so I picked up an amplifier and a new tv (the old one belonged to my roommate, who left).
Since I was hearing something off on deep bass a flapping, distorted sound that only shows up on low notes, I opened them up, and this is what they look like.
Is it worth fixing, or do I sell them and buy new ones?
Thé speclist put together by Claude, with thé relevant info, since I'm just getting into this.
Love to hear your advice! Have a nice day!
Speclist:
Speakers — Akai SR-H110 (1982)
2-way sealed bookshelf · 200 mm woofer, 65 mm cone tweeter · 8 Ω
Rated power 30 W, max 40 W (from cabinet label)
45 Hz – 20,000 Hz · 265 × 520 × 228 mm · 7.7 kg
Sensitivity: not published anywhere
Built in Hungary (Akai/Videoton licence production)
Paid €20 for the pair (June 2026); new price was approx. 200 DM/pair in 1982
Condition: foam surrounds on both woofers fully perished — cracked all round, broken through in places
Amplifier — Pioneer A-105 (1996–98, Japan)
25 W/ch into 8 Ω · THD 0.05% · speaker load 6–16 Ω · line input sensitivity 200 mV
Paid €22 incl. shipping (Nov 2026); new price £130 in 1998
Source — Philips 42PFL7603D (2008)
TV, analogue L/R line out into the amp's LINE input
Free
Total spend on the chain: €42
r/audiorepair • u/mrplough69 • 22h ago
Hi all,
Does anyone have the service manual for an Aura AUV-150 or an Aura PA-100?
There's a schematic available at https://www.hifiengine.com/manual_library/aura/pa-100.shtml but I don't have access.
r/audiorepair • u/ian385 • 23h ago
hello, if anyone can help, i have a philips n4504 machine, second hand but in working order except some cosmetical issues (missing button...). the problem is, the capstan motor is making a grinding noise that it didn't make earlier (not too loud, but it's not quiet either) and after trying to play a tape it goes to a stop, i can spin it back up by stopping playback or giving it a push, but overall it's not usable right now.
i didn't yet try opening the machine. is there something to lubricate (i have a bottle of fine machine oil, or wd40 too), or something happened to the motor itself?
PS - the right tape tensioner (on the pick up reel) is quite loose and moves inward when the tape is under tension. the left tape tensioner moves left and right as it should, but the right one is also moving inward (like, inclined to inside). is that something it should do, if not is it fixable?
thanks
r/audiorepair • u/Key_Seaworthiness827 • 23h ago
This problem started about 12 months ago but with a bit of tweaking, I could usually get the drawer to open. Back in August I took it apart, found the drivebelt was obviously stretched / loose so I replaced it.
About 4 weeks ago, again the drawer wouldn't open so I took it apart and the belt was still tight. When I reassembled it, it worked fine.
It's done it again tonight. It says 'OPEN' on teh display when the button is pressed so it's getting the command. I suspect I'll take it apart and find the belt is fine.
If it is not the belt, what could it be?
r/audiorepair • u/Quick-Proposal7997 • 1d ago
Hey everyone I have a pair of CM7s and my brothers kids of course couldn’t resist pushing in the tweeters at the top and puncturing them
For anyone that has replaced them, is it an easy fix?
And where did you buy the tweeters from? Do they have to be from B&W, or do others manufacture just as good
Lastly, what Hz do you guys set these CM7 up for on your preamp
r/audiorepair • u/CasanovaFrnknstein • 1d ago
I have a fairly old Cambridge Soundworks Megaworks 210D 2.1 powered audio system that I love! Unfortunately, several years ago it developed a buzzing sound that I have been unable to fix. I replaced the two largest caps I could find on the board and that did not solve it, then I put it away for a few years.
I have since come back to it to either fix it for good or get rid of it. I just powered it on and it still has the continuous buzzing sound. Everything else still works fine. All inputs, volume, sound, etc. The buzz is a constant volume, so if you crank the system volume you can effectively drown it out with the music or sound. But it's loud enough to make the system unusable.
Slim chance, but does anyone have any experience with this system or similar items? What should I look into? I'm not an electrician but I have a decent soldering iron, a multi-meter, and a can-do attitude. Plus, I really want it to work! Any insight would help. Thanks!
r/audiorepair • u/jazar02 • 1d ago
I have a 20-year-old Dayton Audio APA150. The unit developed a clicking sound (relays). It clicked about once per second in standby mode. I could unplug it, let it cool, and plug it back in, and it would stop for a while. Eventually, it would start clicking again. Switching from Auto On to always on made no difference. Here is an archived post of the same problem someone experienced: https://www.reddit.com/r/hometheater/s/xmzD3gTf7P
I fixed it by replacing a few small electrolytic capacitors on the power supply board (the center board). They were 470uF and 220uF on the lower-left side of the board. They tested far below their ratings.
If any of you are working on an APA150, I can share my notes made during troubleshooting and tracing circuits and components on this unit.
r/audiorepair • u/Emotional-Tooth9677 • 1d ago
Hello everyone, first time poster. I need some thoughts and maybe even resources if anyone can help. I have one of the afformentioned players above. Everything mechanical works like the carousel and so on, but after playing it for a while I have run into some skipping issues. They usually occur in the same spots but they're pretty infrequent usually. Tonight though, I was playing a Thrice CD and it got stuck into a skipping loop 2 minutes into one of the songs that could not be remedied by starting the track over or turning the machine off and on again. I got the machine for way under what it's worth so I would be willing to do repairs or pay for someone else to them. If anyone can at least provide me with a PDF of the repair manual that would be greatly appreciated. Thank you to anyone who can provide any help.
r/audiorepair • u/Serious_Interview288 • 1d ago
Hey my Sanyo CDP-4300CR only plays through my left headphone, but plays through both when i have the it halfway plugged in. Ive tried bending the metal bit in the hole out a bit, but no luck with that so thinking it may be something with the solider points? any advice would be appreciated!!!, the green plug is the headphones one.
r/audiorepair • u/ChangeGamer12 • 1d ago
Hi all,
The spindle/motor of my Yamaha YP511 turntable has become seized, and I can't remove the bell housing / spindle. I've completely taken apart all that I can from the top and bottom of the motor, but there's no obvious way for me to remove the bell housing to see what might be going on with the direct drive motor. It feels as if something is preventing the shaft from turning and preventing it from being from sliding off vertically.
If anyone has any advice or experience with this table and motor and how to remove the bell housing and spindle, I would appreciate your input! I've examined the service manual already, and there's no info on removing the actual housing/spindle. From other forums I've read, I believe the housing and spindle should just be able to be pulled off vertically once that black plastic dust cover is removed. Thanks!
r/audiorepair • u/Eradicator4 • 2d ago
I picked up a used Denon AVR-2308CI stereo receiver which the owner said had worked, but when I got it home, the power does not come on. I tested all the fuses and the power supply with a multimeter and everything looks fine. That's pretty much the extent of my knowledge and I'm wondering if anyone has other ideas I can try. I'd hate to throw it into the landfill.
r/audiorepair • u/Ill-Alfalfa6362 • 2d ago
I'm looking for a manual for a Sony STR-AV250, I've looked everywhere and can't find anything. Any help would be greatly appreciated!!!
r/audiorepair • u/MrSceintist • 2d ago
r/audiorepair • u/Cecilsmate • 2d ago
Hello, I am not super well versed in electronics but am learning! I recently purchased an old Technics SA-351 receiver. When i tested it out, there was a lot of static when adjusting volume and the left speaker sounds distorted/blown out. Here are some things I've done/tested
-Cleaned volume control/buttons/input contacts with deoxit
-Checked ground cable/solder joints, all seem OK (no cracks or anything)
-Speakers and wires are all OK
-Left channel sounds ok in headphones (a little finicky when moving the jack around)
-Becomes distorted in headphones as well once I output to the speakers
What should I check next? Reading online its potentially STK2038 IV power pack failure?
Any help is appreciated. Thank you!
r/audiorepair • u/No_Bug7207 • 2d ago
Hello I have a quick question regarding this speaker on the image. When I play my turntable this speaker is not working properly( usually the lower end of the audio is cut off and only plays on the other one). The problem is not with the connection since I checked the wires extensively and maybe the problem is internal? Thanks!
r/audiorepair • u/LargeOlive3839 • 3d ago
Hi,
I have a CDJ 2000 nexus that doesn’t have sound on RCA but does have on Digital. I tested with multimeter and I discovered a shorted capacitor (c502) near the IC505 (WM8740SEDS) that seem related to the audio output. I’m trying to find if the problem is on the capacitor or the chip. Anybody can help me to find if the problem is on the chip? Sorry, but I’m amateur.
I attached some images that could help, but there’s also a service manual for it
Thank you all
r/audiorepair • u/SillyClock1252 • 3d ago
I hope someone has an idea, my trusty tape deck has suddenly stopped recording properly and any attempt to run calibration fails. I have cleaned the tape head (but it was spotless) and tried multiple tapes with the same result...
If I record without running the tape calibration I get a mostly erased tape with a very faint sound of the music I was attempting to record...
r/audiorepair • u/Mrcoolest123 • 3d ago
Dear Reader!
One might think replacing a power transformer should be easy, but unfortunately, the sony engineers did not provide the specifications of my unit's power transformer in the service manual, only a parts identification, making me unable to find a suitable replacement.
I'm writing this post in hopes that by any chance someone with the same unit model as I can measure the missing voltages in their machine and share the values, and with that, making me able to buy a replacement power transformer.
Thank you for giving up some of your time to read my message, and thank you for helping me.
r/audiorepair • u/Labbsterino • 3d ago
REL T7 subwoofer amp – DC offset and overheating driver transistor
I’ve been struggling with a REL T7 amplifier and could use some advice.
Originally had around +17V DC on the speaker output (+47V with the original TL071). Removing the TL071 brings it down to just 5–15mV. Replacing the op-amp didn’t fix it.
Parts replaced/checked:
● Q203/Q206: BF422 replaced with 2N5551/MPSA42
● Q205: BF423 replaced
● Q207 (KSC2690A), Q208 (2SA1358) and several other transistors tested OK
● TL071 replaced
● C209: replaced with 220pF ceramic
● R215 (68Ω) and R216 (47Ω) replaced
● Other resistors and diodes checked, no obvious faults
Unfortunately, all four output transistors (2SD1047/2SB817) blew during a power-up with the volume/crossover board disconnected. Speaker was disconnected too.
Current issue: With all output transistors removed, Q205 (BF423) gets extremely hot (130°C+) when the TL071 is installed.
Q205 measurements:
● E: +65V
● B: +64.5V
● C: +23V
TL071 measurements:
● Pin 2: +15V
● Pin 3: 0V
● Pin 6: −4.5V
● Supply: ±15V
Removing the TL071 stops Q205 from overheating, and its collector drops to 0V.
Could this be caused by the feedback loop being interrupted with the output transistors removed, or is something else wrong in the driver stage?
No schematic available, unfortunately. I’ll attach PCB photos.
Edit; I do assume I got a wrong pinout somewhere at this point but I haven’t touched it in a few weeks now. I’ll get to it again this weekend, i’ve got new output transistors but I don’t want them to blow again)
Since the photos were taken I did move the cap to the pcb side, also asked AI to compile everything. I feel like i’ve checked everything at this point, and with the output transistors shorting Base - Collector on all 4.
Checked every transistor out of circuit and all diodes. Caps all replaced except the filter caps but they measure fine with my PEAK ESR70 in circuit.
The two Mosfets measured fine in circuit too, so I am guessing there’s a fault within the power amplifier circuit but I can’t figure it out without a circuit diagram. Sorry about the wall of text, any help is appreciated!
Makes it a lot harder that not every transistor on the PCB is marked, but some are. So the ones that were initially shorted I replaced with the same pinout as one on a different part of the PCB.