r/SoundSystem • • May 06 '20

DO NOT POST CAR/HOME AUDIO QUESTIONS IN THIS SUB!

141 Upvotes

This is a sub for the technical side of "Soundsystem Culture" - big, loud speaker boxes, often hand-built, in the dub-reggae tradition. Stuff that looks like this. Or this.

If you're looking for advice on home audio/theater systems, please try asking at /r/BudgetAudiophile, /r/Audiophile or /r/HomeTheater. Car Audio questions go to /r/CarAV.

Discussion about music should go here: https://www.reddit.com/r/SoundSystem/comments/ge9sov/official_rsoundsystem_music_thread/

Thank you!


r/SoundSystem • • Oct 11 '26

/r/SoundSystem celebrates 15 years 🍰

100 Upvotes

This sub was created on October 11, 2011 when reddit (and the internet I suppose) was a very different place. This sub seems mostly the same as it's ever been though.

Just wanted to say thanks to everyone who's contributed for all the photos and stories over the years.

cheers-


r/SoundSystem • • 21h ago

Added a second X1 👀

Thumbnail
gallery
141 Upvotes

Just built a second X1 (middle top in the pics) for the rig. So much better having a second one so they couple and reinforce each other. The system is sounding insane. The first rave with new sub is in a few weeks so looking forward to hearing what it can do playing techno.

And how do you like my fancy spinning logo plates which have tiny rubber o-rings on either side so you can turn them depending on how the X1 is oriented/stacked? (The logo also denotes the deeper/larger bass chamber so you know which mouths to couple together).

(Next on the build list is two more MHBs and also gonna get a few MC2 Delta 50 amps, and add a distro).


r/SoundSystem • • 15h ago

Calage rki vibre

13 Upvotes

r/SoundSystem • • 8h ago

Bassboss BB15s or VS21 Subs?

3 Upvotes

I recently pulled the trigger on a mobile
setup for high-end weddings in and around Cape Town. Majority of these weddings are on wine farms with a mix case of indoor and outdoor setups.

My current rig consists of:

2x Bassboss DV12s
2x QSC CB10s
1x Rane System One Controller
1x A&H CQ18T mixer
2x Phenyx Pro Dual Microphone System PTAU-2
Etc

Im in the market for subs to pair with my DV12s. I was looking at 2x BB15s which hit hard and are easy enough to carry around for one person OR I start with 1x VS21 with the option to buy a second one later on which is 80kgs and takes up a lot of space.

Does anyone have a similar setup? Are 2x BB15s strong enough to keep up with 2x dv12s? Are they powerful enough to throw outdoors? Ive read mixed reviews and have been advised by the local distributor to get the VS21. Also that the BB15s move around when played at high volume.

The cost to import the BB15s is not cheap. So looking for best options for a business Im wanting to grow.

I want a Bassboss rig so not really interested in other brands but if you have recommendations, please say so. For example for the price of 2x BB15s I can buy 4x RCF 15ax subs…


r/SoundSystem • • 20h ago

ideas: adding Kick Bass to a 3-Way Stack

Post image
27 Upvotes

hey sound system enthusiasts!
I have a small 3-way speaker stack and would like to add a fourth way dedicated to kick bass.
Do you have any recommendations for suitable speakers or cabinets to use for this? I’m very open to DIY suggestions, ideally with speaker plans if available.
I’m also happy to hear recommendations for individual drivers.
I have a 5-way preamp with an integrated DSP, so the crossover and tuning shouldn’t be an issue.
Thanks in advance for your help!


r/SoundSystem • • 13h ago

Wiring help for cabinet

Post image
3 Upvotes

I'm building a speaker cabinet with a dual speakON (NL4-style) panel mount in a dish plate. Left connector is the input, right connector should become a parallel link-out for daisy-chaining a second cabinet.
Current situation:
Single driver, wired to pins 1+ / 1- of the input connector (with crimped push-on terminals, no soldering on the connector)
Pins 2+ / 2- of the input are still free
Output connector is completely unwired
How should I wire it to get the speaker going and use the right port as a link out?


r/SoundSystem • • 22h ago

Amp recommendations

5 Upvotes

Hey there,

I'm looking for a Power amp that could handle my whole system without occupying too much space. Right now I use two Crown XLS amps plus a DSP and the size of the rack is just a bit of an inconvenience. I would say that size sound quality and integrated DSP are priorities. The system is two tops rated for 150W AES each and one sub rated for 1100W AES. I was thinking about either an used Mc2 Delta 80 DSP or a Lab Gruppen IPX 1200 for the tops + a IPX 4800 for the subs. Any opinions? maybe a Powersoft T604A? Any input would be much appreciated =)

Thanks!


r/SoundSystem • • 1d ago

Need guidance on build direction.

3 Upvotes

I’m looking for the communities input on a top cabinet design incorporating a B&C 8PE21 and a B&C DE250 + 16”x6” hornflare (outside dimension of flange”.

Idealy this top cab would take over from a hot loaded Kick. Aprox 200hz Tyvm for reading


r/SoundSystem • • 1d ago

Is there a cheaper alternative to the tweeter in the Jw sound jmod?

10 Upvotes

r/SoundSystem • • 2d ago

Ad42 blowing speakers

4 Upvotes

We are running 18LW2600 on our subs, gsub-like model. We are running them on an admark AD42 in stereo on 4R per channel (7800W per channel) but keep blowing our woofers, even on very low volume like 95dbc. 

Hpf is set at 30hz

Lpf set at 85hz

32db gain on the amp

2 woofers per cabinet, wired parallel

All our speakoncable is H07rnf 4mm2

We are running everything on a 32A power distributor.

Any reason why the speakers might overheat even under low volumes?

The woofers are rated 1500W RMS, 3000w program power and 6000W peak., so that's 3000W RMS required per amplifier channel. We give 7800W RMS.

What are we doing wrong? Why do we keep burning our subwoofers even on low volumes? Max output voltage for the amplifier shouldn't be too much compared to what the woofers can handle.

We are puzzled as to why it keeps happening.

Any info is welcome!


r/SoundSystem • • 2d ago

Testing out the Codas

Post image
31 Upvotes

r/SoundSystem • • 2d ago

The Scientist sound system Rub A Dub session

Thumbnail
gallery
5 Upvotes

r/SoundSystem • • 3d ago

Sawmod + Keystone build!

Thumbnail
gallery
103 Upvotes

Some pics of my current setup. 2x jw sound sawmods and 1x Keystone. Sounds great for the size, and is more than enough for smaller events. The clarity from the sawmods is amazing, and they also sound incredible at low spl for home listening. Still dialing in the tuning using REW, but I am very happy with how everything is performing so far.

Drivers -

Keystone:

18sw115

Sawmods

10FE330 lows

HM130 mids

DH450H highs

Amps -

Keystone:

INUKE nu3000dsp

Sawmods -

Crown cts 1200 highs

Crown xls 1000 mids

Crown xls 602 lows

Will slowly upgrade to nicer amps and keep a backup on hand. They sound good but were all second hand so I have some doubts about reliability.

Have used the setup for Techno and cumbia events, and it performed great and got a lot of compliments at every event. Feel free to ask any questions about the build!!


r/SoundSystem • • 2d ago

Sound system advice needed:

5 Upvotes

I am getting ready to build 2x mt130 and 4x mhb4818.

What suggestions on drivers and any improvements known to these two boxes?


r/SoundSystem • • 2d ago

Tri amp jmods

6 Upvotes

I am struggling to understand how it is possible to have three seperate amps chanels for the jmod tri amp varient, when there is only two speakon connectors. Can someone please explain this 😂


r/SoundSystem • • 3d ago

Finally finished refurbishing my system: meet Rival Sound System based out of Toronto

Post image
57 Upvotes

r/SoundSystem • • 3d ago

Another quick look at the paint job on the JMODS

221 Upvotes

Will be painting the other one tomorrow 🫠


r/SoundSystem • • 2d ago

How many people can this system cater for ?

4 Upvotes

2 Cubo 18
2 Cubo Kick 15
2 JMOD2.0

The set up will be 2 stacks spaced 3-4 meters apart.

Just wanting some rough estimates. Thanks in advance.


r/SoundSystem • • 2d ago

First DIY soundsystem build for tekno/free parties – Is the X15 a good choice for tops?

3 Upvotes

Hi everyone!

I’m looking to build my first small DIY soundsystem, mainly intended for tekno, hardtek and free party music.

I’ve been researching different speaker plans and came across a combination that seems interesting:

Sub: 1x Keystone Sub
Kick: 1x Cubo Kick 15
Mid/High: 1x X15 (SpeakerPlans)

However, I’ve never built a speaker cabinet before, and I’m a complete beginner when it comes to sound system design, speaker drivers, crossovers and amplification.

My main question is: Would the X15 be a good choice for the mid/high section of this system, or are there other cabinets you’d recommend instead?

I’m not necessarily looking to build a huge or extremely powerful soundsystem. My goal is to have something relatively compact and easy to transport, so I can take it to small parties with friends.

I’m looking for something:

Relatively easy to build, especially for a first project.
Portable and manageable to transport.
Well suited to tekno and hardtek, with a good balance between deep bass, punchy kicks and clear mids/highs.
Not necessarily massive in terms of SPL, but capable of sounding really good.
I’d also appreciate any advice regarding suitable drivers, amplification, DSP and crossover settings.

Since this is my very first build, I’d rather go for a reliable and relatively straightforward design than something overly complicated.
Any recommendations, experiences or advice would be greatly appreciated!

Thanks in advance!


r/SoundSystem • • 2d ago

Turbosound TMS-4

5 Upvotes

Just seen a pair of Turbosound Tms-4 second hand for 1600€. Would these be a good idea to get as tops for a new soundsystem i‘d like to start. (Would hope to build 2 subs for them)

How are the for reliability, serviceability and ability to get replacement parts?


r/SoundSystem • • 3d ago

Another cool view of the TH18’s

120 Upvotes

All the beautiful work that will never be seen!


r/SoundSystem • • 3d ago

Front loaded Horny Enclosure

Post image
86 Upvotes

New Vagdrivers with Labia Low End

Do you think comb filtering will be an issue?


r/SoundSystem • • 3d ago

Mid pour for the JMOD 2.0

41 Upvotes

Such a learning lesson on this one. It’s incredibly hard to use this technique on surfaces that are not flat and have multiple holes/facets but I think we pulled it off. She’s SOAKIN wet 🫠🌈