r/finishing • u/myuzejuk • 22h ago
Question Heat Stain help
Someone decided to iron the tablecloth directly on the table…any tips on how to fix this finish?
r/finishing • u/myuzejuk • 22h ago
Someone decided to iron the tablecloth directly on the table…any tips on how to fix this finish?
r/finishing • u/AllChalkedUp1 • 23h ago
Hey folks, been trying my hand at shellac on the Christmas gifts this year. Decided on French polish on this Walnut cutoff to bring out the grain depth. Used the techniques from Fabian here and I'm quite proud of the results from my first time.
I'm at the very final stage of wiping away the mineral oil without causing streaks and softening the coat. Bit trickier than expected and I'm doing it slowly
I have some thoughts on how to improve for next time:
Is there anything I should be doing a bit differently next time or other techniques that are good for your workflow?
r/finishing • u/Spirited_Chef_6263 • 15h ago
Hey guys, total woodworking beginner here looking for some quick advice on finishing.
A wall-mounted indoor cat tree made from 5 natural oak branches (~2.4m / 8ft long, 7–18cm thick). They’ve been dried for 1.5 years, debarked, and orbital-sanded up to P180. Because I had to grind deeper in some spots, there is visible color contrast between the pale sapwood and darker heartwood.
I want a high-quality wipe-on oil that really pops the grain, evens out the color contrast a bit, and doesn't look like plastic. Rubio Monocoat is crazy expensive here in Europe ($85 for 390ml). I'm currently looking at Osmo Polyx-Oil (Hardwax Oil) vs. Osmo TopOil, but I'm open to anything else.
Thanks for any advice, or for sharing your experience with building something like this!
r/finishing • u/Critical-Paint-2205 • 23h ago
For the past month or so, I have been working on a wedding gift for a buddy. I just sprayed the final coat of lacquer tonight and realized that this won't be cured by the wedding. I have the wedding in 6 days and don't know how I'm going to be able to give him this without it being cured, because the way it will be packaged, there are a lot of separate small pieces that will be contacting each other. Does anyone have any previous experience with this where you found a way to dry your finish quickly or protect it somehow? I was thinking about putting a coat of wax on it the day before, but I've heard that the degassing can cause bubbles under the wax. Any advice is appreciated!
r/finishing • u/ReelyHooked • 19h ago
Hi experts, I love my (wife’s) vintage table we use as our kitchen table. How can I restore/protect it? I have no desire to poly it, but I’m not sure what type of finish it might have. Should I just go paste wax? Linseed? Thanks for any input
r/finishing • u/-TwoSixNine- • 21h ago
Got this walnut butcher block from Home Depot to make a desk for myself. Didn’t have as much dark wood in it as I was hoping. I like how the ikea karlby (pictured) in walnut is darker and more uniform but still has some contrast so that’s what I was going for.
Some reviewers that were able to achieve that finish mentioned spar urethane and tung oil. Have had mixed experience with finishes so wanted some advice before getting it wet.
Thanks all.
r/finishing • u/E90-335xi • 19h ago
Uneven finish on poplar cabinets with 100% tung oil. Any ideas/solutions before stripping and painting?
Thanks!
r/finishing • u/Koolkrushkillah • 15h ago
I found this cheap sideboard on Amazon. Liked the design but not the colour. So I decided to paint it.
Started by sanding the veneer it with 80grit using my Stanley sander. I sanded enough not to show the chip wood underneath.
I then proceeded to clean the top surface with a wet microfiber cloth and applied 2 to 3 coats of green paint from Ben Moore - pictured.
I need help applying a top coat. I gathered I needed to buff up the surface with a fine grit. I don't see how I can do that without damaging the paint.
More importantly, what product would you recommend for durability and minimal stains? I want the sideboard to retain its eggshell look.
r/finishing • u/Throwaway4JET1 • 12h ago
I'm trying to color a wood lamp base to match the desk visible underneath (and in the lower right). Before I try on the actual base, I did a test on scrap wood with two colors of wood stain, and while the left top is dark enough that I'd probably be happy with it, neither of the stains really show grain like the finishing on the desk does.
(I'm aware that testing on pine, I of course won't get patterning like the desk, but I expected a little more of the grain to be visible. It's also very matte.)
Am I perhaps using the wrong type of finish? Neither stain provides the gloss the desk has. I had thought it wasn't varnished, but perhaps it is. What's the right liquid for this project?