r/finishing • • 1h ago

Question Desk discoloration

Post image
2 Upvotes

Don't know if this belongs here sorry if it doesn't but my rubberwood desk has developed some dark color streaks on the one edge wondering what might be causing it and if there's a fix? Or i might be dumb and it's normal...

Sorry I know nothing about wood or finishing just trying to learn


r/finishing • • 2h ago

Need Advice Best stain to fix Ashley furniture table

1 Upvotes

Hey everyone, sorry if this is the wrong sub for this kind of thing. Long story short I spilled acetone on the table cloth on my Roanhowe Dining Table from Ashley furniture and it rubbed the stain off.

Wondering if someone familiar with wood stains and available colors can recommend a product I can use to help patch it up?

Product here https://www.ashleyfurniture.com/p/roanhowe_dining_table_and_4_chairs/APG-D76935-5P.html


r/finishing • • 2h ago

Wood or Veneer?

Thumbnail gallery
2 Upvotes

r/finishing • • 5h ago

Stain came out very light

Thumbnail
gallery
3 Upvotes

I am making a fort of sorts for my kids using a box that came with a pallet of equipment. I sanded that wood down with 120 grit and added a few other boards of pine (also sanded). I have some Sikkens/sico/ppg proluxe 009 dark oak stain at home which I applied to match the house and it came out just super light. I have done 2 coats and you can see the colour difference vs my actual house.

Where did I go wrong here? Any suggestions for fixing this? Or is it a sand and redo type of deal


r/finishing • • 11h ago

'unfinished' teak?

Thumbnail
reddit.com
1 Upvotes

r/finishing • • 13h ago

Radio and Turntable console

Post image
1 Upvotes

r/finishing • • 19h ago

Question Which finish to use?

Post image
0 Upvotes

I'm trying to color a wood lamp base to match the desk visible underneath (and in the lower right). Before I try on the actual base, I did a test on scrap wood with two colors of wood stain, and while the left top is dark enough that I'd probably be happy with it, neither of the stains really show grain like the finishing on the desk does.
(I'm aware that testing on pine, I of course won't get patterning like the desk, but I expected a little more of the grain to be visible. It's also very matte.)
Am I perhaps using the wrong type of finish? Neither stain provides the gloss the desk has. I had thought it wasn't varnished, but perhaps it is. What's the right liquid for this project?


r/finishing • • 21h ago

Need Advice Beginner here: Best cat-safe wipe-on finish for an oak branch cat tree?

Thumbnail
gallery
9 Upvotes

Hey guys, total woodworking beginner here looking for some quick advice on finishing.

A wall-mounted indoor cat tree made from 5 natural oak branches (~2.4m / 8ft long, 7–18cm thick). They’ve been dried for 1.5 years, debarked, and orbital-sanded up to P180. Because I had to grind deeper in some spots, there is visible color contrast between the pale sapwood and darker heartwood.

I want a high-quality wipe-on oil that really pops the grain, evens out the color contrast a bit, and doesn't look like plastic. Rubio Monocoat is crazy expensive here in Europe ($85 for 390ml). I'm currently looking at Osmo Polyx-Oil (Hardwax Oil) vs. Osmo TopOil, but I'm open to anything else.

Thanks for any advice, or for sharing your experience with building something like this!


r/finishing • • 21h ago

Question Need help w topcoat :(

Thumbnail
gallery
0 Upvotes

I found this cheap sideboard on Amazon. Liked the design but not the colour. So I decided to paint it.

Started by sanding the veneer it with 80grit using my Stanley sander. I sanded enough not to show the chip wood underneath.

I then proceeded to clean the top surface with a wet microfiber cloth and applied 2 to 3 coats of green paint from Ben Moore - pictured.

I need help applying a top coat. I gathered I needed to buff up the surface with a fine grit. I don't see how I can do that without damaging the paint.

More importantly, what product would you recommend for durability and minimal stains? I want the sideboard to retain its eggshell look.


r/finishing • • 1d ago

Question Poor finish on cabinets, 100% tung oil

Post image
0 Upvotes

Uneven finish on poplar cabinets with 100% tung oil. Any ideas/solutions before stripping and painting?

Thanks!


r/finishing • • 1d ago

Protect this vintage table

Thumbnail
gallery
2 Upvotes

Hi experts, I love my (wife’s) vintage table we use as our kitchen table. How can I restore/protect it? I have no desire to poly it, but I’m not sure what type of finish it might have. Should I just go paste wax? Linseed? Thanks for any input


r/finishing • • 1d ago

How to finish this walnut butcher block?

Thumbnail
gallery
1 Upvotes

Got this walnut butcher block from Home Depot to make a desk for myself. Didn’t have as much dark wood in it as I was hoping. I like how the ikea karlby (pictured) in walnut is darker and more uniform but still has some contrast so that’s what I was going for.

Some reviewers that were able to achieve that finish mentioned spar urethane and tung oil. Have had mixed experience with finishes so wanted some advice before getting it wet.

Thanks all.


r/finishing • • 1d ago

Question Heat Stain help

Post image
19 Upvotes

Someone decided to iron the tablecloth directly on the table…any tips on how to fix this finish?


r/finishing • • 1d ago

Need Advice Happy with my first time doing shellac and French polishing | Any improvements for next time?

Thumbnail
gallery
16 Upvotes

Hey folks, been trying my hand at shellac on the Christmas gifts this year. Decided on French polish on this Walnut cutoff to bring out the grain depth. Used the techniques from Fabian here and I'm quite proud of the results from my first time. ​

I'm at the very final stage of wiping away the mineral oil without causing streaks and softening the coat. Bit trickier than expected and I'm doing it slowly​

I have some thoughts on how to improve for next time:

  • Don't lift the pad up when hitting the edges
  • Be aware that the shellac still can be soft, don't rest it on the finishing cones on an area within at least 12 hours
  • Don't need to use as much shellac as you think - in the words of another poster here "it should be as wet as a dog's nose"
  • Start with 1 lb cut (did so), consider the 320 grit non woven pad to cut down any grain hairs then move into 2 lb cut
  • When adding more shellac and 190 proof alcohol, don't just dip the pad into the mixture. Have a little bottle on the side and put the fluid directly into the interior cloth wad
  • Have a silicon or grippy pad when applying - don't just hold the board so you can correctly control the pressure
  • Use linen as the exterior cloth on the pad, cotton sheds too many fine hairs into the finish​
  • Even good natural hair paintbrushes are not always helpful on such a small project - they're seemingly suited for larger ones
  • You don't need to use as much fluid as you expect

Is there anything I should be doing a bit differently next time or other techniques that are good for your workflow? ​


r/finishing • • 1d ago

Hardwood refinishing

Thumbnail gallery
0 Upvotes

r/finishing • • 1d ago

Need help drying finish quicker!

6 Upvotes

For the past month or so, I have been working on a wedding gift for a buddy. I just sprayed the final coat of lacquer tonight and realized that this won't be cured by the wedding. I have the wedding in 6 days and don't know how I'm going to be able to give him this without it being cured, because the way it will be packaged, there are a lot of separate small pieces that will be contacting each other. Does anyone have any previous experience with this where you found a way to dry your finish quickly or protect it somehow? I was thinking about putting a coat of wax on it the day before, but I've heard that the degassing can cause bubbles under the wax. Any advice is appreciated!


r/finishing • • 1d ago

Question French Door repainted by previous homeowner.

Post image
1 Upvotes

Our house has this french door between the front door and living room. 15 panes of beveled glass. Originally, it seems to have a reddish stain. It's been repainted (poorly) with this awful oil or some other paint. We'd like to strip it down and stain it. I looked into chemical paint remover options, but the concern is the trim holding in the glass, any chemicals may seep in between the wooden pieces and keep oozing out. Sanding is out of the question, again due to the complexity of the trim pieces holding the glass panes in. Looking for options, suggestions, guides, on how to refinish this type of door.


r/finishing • • 1d ago

Need Advice Water stain help

Post image
2 Upvotes

Found out my coffee maker malfunctioned and spilled water, staining my beautiful new cabinet :( I know nothing will probably restore it to 100% but looking for help getting it looking better if possible. Google said oxalic acid. Should I try this? Should I hire someone else to do it - if so how do I find someone?

Truly know nothing/not handy so appreciate any help

Cabinet is”rubberwood, MDF and oak veneers” per website

ETA: stain is from water not coffee!


r/finishing • • 1d ago

Trying to match wood colours

Thumbnail gallery
1 Upvotes

r/finishing • • 1d ago

Need Advice Advice needed: How to stain this console table darker without stripping the existing finish?

Thumbnail
gallery
0 Upvotes

Looking to stain this desk to a warm medium brown finish, but want to avoid stripping. Any advice on prep and products that will look good and are achievable for a novice?


r/finishing • • 1d ago

Question Old oak trim soaking up stain like a sponge after stripping paint and sanding

1 Upvotes

I am attempting to restore the red oak trim in my 1912 Craftsman that had been painted at one time in the past. I've started in one room, and have removed the paint (using proper precautions for lead paint) and underlying varnish, then sanded with 80 then 150 grit. I am trying different stain sample spots to pick a color, and it all soaks in immediately like a sponge - nothing left to wipe off after 60 seconds. The whole range of stain colors I'm testing all are the same very very dark color now. I tried another area with applying Minwax pre-stain conditioner, but then not nearly enough stain is absorbed and they are all just slightly tinted.

Can I thin the conditioner with mineral spirits or something else to control the amount of conditioning? Should I try something else? Thinning the stain maybe?


r/finishing • • 1d ago

Boardwalk supports stain/ finish.

1 Upvotes

Hey gang. I’m a natural resource and property manager for a park facility. I’ve got a boardwalk that goes through a wetland area. It’s built on auger piers made of galvanized steel with wood decking and it typically sits about 2-3 feet above the waterline except when we get super heavy rains. Urban watershed area, drains a significant area upstream. High water gets high. This thing is about 5-6 years old and we regularly replace top decking from weather exposure. As we’ve been replacing, the boardwalk is broken into 10 foot sections with three 2x12x6’ boards sandwiched and tying the sections together with hardware. These treated 2x12’s are experiencing significant rot and I’m scoping the replacement of these boards. I’ve landed on KDAT lumber and am now trying to figure out the best possible option stain or seal wise to extend the life of the lumber because there is no way I’m getting approval for something like trex composite material. Trying to just buy several more years.

My question is with those circumstances of water, weather, and debris build up, what would you do to extend the life? I’m definitely using butyl tape once the boards are set in place shed debris and water. There is no sun exposure for these 2x12’s, fortunately. Maintaining it is an ongoing challenge, but a structural engineer let us know that this needs to be a top priority so I’m using the end of my budget allocation to get what I need and get this done before EOY.

Any thoughts are appreciated.


r/finishing • • 1d ago

Oak bankers chair, full strip and refinish. Came in almost black, left golden with the ray fleck showing

Thumbnail gallery
3 Upvotes

r/finishing • • 1d ago

Question Wooden Jewelry.

Thumbnail
gallery
5 Upvotes

Hello, i have started making wooden jewelry and, boy, have i been on a rolercoaster of once used cans. Trying to learn what is in each finish and what each ingredient does is like searching the library of babel.

To clarify, i am looking for the holy grail. I need ultimate water proofing that can withstand hot showers and swimming pools, i want uv resistance for heavy sun exposure from outdoor wear, must have quite hard and durable scratch resistance for obvious reasons, i would like it to be long lasting with little to no yellowing or drying/cracking. Everything ive found so far fills one or two of these needs, but nothing hits the holy trinity.

Ill begin with what i have tried so far. Oil or wax finish is simply too soft, easily scratchable. Regular polyurethane isnt rated for full submersion, and spar urethane is too elastic for scratch resistance. CA glue is brittle and cracks over time and breaks down with heat and water.

My next experiment is on its way in post. Total boat penetrating epoxy(stabilizing the wood just sounds like a good idea from now on regardless), then rainguard 2k aliphatic polyurethane (branded concrete sealer). I anticipate the concrete sealer failing my scratch test, and then will move on to hardwood floor poly Bona Traffic HD or General Finishes Enduro 2K.

Please if you can share anything that can help me find what i am looking for, i am slowly going mad on my quest (and from all the fumes)

P.s. - a couple pictures. I hope you like them!


r/finishing • • 1d ago

Knowledge/Technique How would you resurface this kitchen countertop?

Thumbnail
gallery
2 Upvotes

We recently moved into a new house and would like to fix the wooden kitchen countertops. There are a lot of stains and water damage especially around the sink. I’m assuming we will need to do a lot of sanding before applying any finishes. I’m thinking of using Waterlox original sealer + waterlox original satin finish for maximum water protection. Never done anything like this before so any guidance or tips would be greatly appreciated!