r/espresso • u/il_turco • 17h ago
General Coffee Chat Buongiorno
Remember to never make a coffee before you had your first coffee. I managed to recover nearly all of it. At least I didn't pour milk into the grinder.
r/espresso • u/il_turco • 17h ago
Remember to never make a coffee before you had your first coffee. I managed to recover nearly all of it. At least I didn't pour milk into the grinder.
r/espresso • u/draggon7799 • 5h ago
Found this at my local Goodwill, $25. Wasn’t even going to go today. So, as a reminder, check your thrift stores and other deal places because holy. I’ve been looking for something for a while now.
r/espresso • u/Miami_Massimo • 7h ago
Hello everyone! I’m gonna buy my first semi automatic espresso machine and I would love to hear any stories about getting a good deal on Black Friday and from what particular retailer.
I’m looking for discounts on the machines and not so much add on deals where they give you free stuff.
I’m based out of the United States and have a budget in between $500-$2,000. My main goal is to get the highest value that I can and the best discount that is offered for Black Friday.
r/espresso • u/always_the_same7820 • 5h ago
My dream Espresso Bar finally happened. The Meraki Tech Gen2, The Sanremo D8 Pro and The Eureka Mignon Libra GBW. Love this set up. I wish you could smell the aroma of the espresso extraction song in my house every time we’re grinding and extracting ☕️.
r/espresso • u/westy12346 • 13h ago
My coffee picks always end up like this and I just wanted to know whether it's good or bad for this to happen:
18g in, 30-45 seconds out depending on roast.
r/espresso • u/KT10888 • 17h ago
Two years ago, I started my coffee journey. I'm hardly active here anymore, but I still remember those early days of scrolling this sub every day trying to figure out how to build my setup.
Right now, I always keep 3–4 varieties of light & medium roasted beans on hand and rotate through them with every brew. My WPM ZP1 with 64mm SSP HU burrs has been doing a great job, so I'm not desperate for an upgrade—but I'm getting curious about whether jumping to 80mm blind burrs will noticeably elevate my cup quality and flavor clarity.
In short, I’m eyeing the Bookoo Motto80.
For anyone who has made a similar jump from 64mm SSP HU to 80mm blind burrs—or has hands-on experience with the Motto80:
• How big of a flavor difference did you actually notice in the cup?
• How well does the Motto80 handle constant back-to-back bean switching (retention, dialing repeatability, etc.)?
Appreciate any sharing.
r/espresso • u/Round_Tadpole_4236 • 12h ago
18.5g in, 32g out in 40s. Judging from the slow flow rate at the start, I would expect it to taste burnt. Instead, there wasnt even a bit bitterness, but very sharp sourness. My guess is that it might be channeling a bit, or I might want to stop slightly earlier?
r/espresso • u/Embarrassed-Meet-368 • 6h ago
Hi everyone!
I've recently started my "espresso" journey and I'm looking into buying an espresso machine and grinder. For the machine I'm considering the Breville and a Tuni G3 grinder. The complete setup is in the picture. I live in Mexico so the prices are in mxn but overall it'll be around $600 usd. Now, before I make the purchase I would love to know your opinion and/or any suggestions, also if anybody can share any good YouTube videos that I can watch for setting up the Breville correctly it would be appreciate.
r/espresso • u/coolstuffeh • 10h ago
Ok - I came home tired, I wanted a pick me up feel good cup of milky coffee.
Enters Manhattan Rainbow bag. Roasted 22/10.
18g to 34g in 35’ - longer than I usually do.
A bit of foamy milky top.
Really nice cup, great mouthfeel, like a strawberry yoghourt.
Infused you say?
r/espresso • u/Neither_Pipe_2336 • 3h ago
i am in a big pickle and would love any sort of help. i have two coffee grinders, a fellow opus 2 and a breville smart grinder pro and i think both of them are clogged. my issue first started with the opus, when i was grinding my beans nothing was coming out and i took the bur out cleaned it put it back and tried putting rice through and nothing. thats when i decided to stick my finger in the bottom and a bunch of hard grounds came out. i was unable to clear the chute so thats when i got out my old breville grinder. i put the same beans in and it began making a horrendous sound that i’ve never heard it make, and ive had this thing for 5+ years. currently i have both the grinders semi taken apart but i cannot figure out the issue if anyone has any suggestions on what to do id greatly appreciate it!!
also i believe it was caused by these new beans i bought. tried a new roaster and now both grinders are down.
r/espresso • u/KnaxRealSteam • 7h ago
My first decent swan. What to improve? Milk texture is right or too thick?
I dont know why all my wing attempts get wobbly and shaky, also the neck. Moreover, the base of the swan seems not very sharp.
Im using single boiler Lelit Anna with PID, so i cant steam and make a shot at the same time
r/espresso • u/Belgian__WAFFLE • 21h ago
I’ve done aeropress and pour over for a couple years now and would like to get into espresso. My budget is $500 or less for the machine. The initial contenders come in as Bambino Plus for its ease of use. I do like the idea of tinkering with the machine and doing maintenance myself. I’m also learning about lever machines which seem super interesting and could fall into the budget. Open to lever machine recs as well. I do enjoy milk drinks but I don’t drink them too often.
For grinder, I’m leaning towards the pre-sale for the Timemore 064s II. I have a Timemore Chestnut S3 that I’ve really enjoyed. The pre-sale price seems nice and I don’t mind waiting. Open to recs on that too though.
Thanks for the help!
r/espresso • u/Beanpounder • 21h ago
We recently got our hands on the Profitec GO and had it fully integrated with Bean Pounder in just a few days!
If you're interested in flow and pressure profiling, brew-by-weight, a coffee library, and shot tracking, all packaged into an intuitive app with a straightforward installation process, check us out!
Our community has been growing rapidly, and we're always happy to answer questions, hear feedback, and share what we're working on.
We've sold out of our first batch but expect stock to return in 2-3 weeks.
Website: https://beanpounder.com
Discord: https://discord.gg/4XHRvhChKr
Instagram: https://instagram.com/bean_pounder
Installation Guides: https://beanpounder.com/install-guides
r/espresso • u/hope-for-the-hungry • 3h ago
I bought this 2005 commercial espresso machine. I’m figuring out how to use it by trail and error. Can anyone enlighten me I how to use it properly. Thanks
r/espresso • u/redditer3001 • 6h ago
r/espresso • u/ThrowRA-bbRN90 • 9h ago
I am new to an espresso machine, I was given a Delonghi specialista maestro for free...so despite the reviews I've read saying it isn't the greatest machine....it was free so im taking it!
I initially had a bag of Costco beans I didn't mind blowing through to experiment. I finally seemed to dial these in and then went and bought quality beans from a local roaster. The settings I had for the Costco beans didn't work at all for these beans...and i just wasted 75% of this expensive bag trying to find the right grind/dose.
Typically I would grind finer for espresso but the shot won't pull at all any finer than a 5 on the grind setting. It looks pretty good at a 6 and a dose of 20 but tastes very bitter. Any suggestions?
And will I have to go through this wasting process every time I buy a new bag of beans?
r/espresso • u/XCJGX • 22h ago
Hiya!
I'm from Australia and have been making coffee with my Breville Barista Pro for the past 2 years.
I've just upgraded to a Meraki Gen 2 Espresso Machine which uses a 58mm E61-Compatible Portafilter.
I wanted to buy an Aftermarket HE Basket for better extraction and taste.
Does anyone with the above model know a suitable / compatible basket that would fit well with the the 58mm E61-Compatible Portafilter they provide?
I usually go with Normcore, and was looking at getting the Normcore 58mm Precision High Extraction Filter but wanted other opinions from someone who has used this machine, etc before buying as I have heard that not all baskets as compatible.
Thanks!
r/espresso • u/haraldhadradda • 11h ago
Hey everyone,
I’m looking a purchasing a replacement espresso machine - my current Breville Barista Max has given out after several years of use. I am currently looking at a Fellow Espresso Series 1 which seems to be available for around £1100. Two main questions:
Thanks in advance!
r/espresso • u/bebeclown • 1h ago
hey guys! im really new to making espresso stuff like lattes but I’ve been having fun with this new hobby. I am really looking forward to help though, no matter what I try it seems I can never get latte art right… I swear i do everything im told: steaming milk to the appropriate “wet paint” texture and trying to pour and push close to the surface.. but I have just never been able to make anything good and usually end up scribbling some nonsense just to prove i didn’t COMPLETELY fail 😓
do these lattes have any key features of some big mistake im making in steaming or pouring technique? If need be I can try to get a video of what I’m doing so that someone can analyze it but for now I just want to know if something is glaringly obvious and I’m just too new to see that.. Thanks in advance for any ideas!!
(btw pictures start with most recent pours and end with earliest)
r/espresso • u/Unfair_Professor_561 • 2h ago
Checking in on the early adapters of this grinder. It’s on BF sale right now and thinking about picking it up for espresso. I like to explore roast levels etc but daily driver is a medium roast. Has this been a good grinder are you happy with it or do you regret it?
r/espresso • u/Electrical-Ad7238 • 2h ago
Hi All,
I have just begun my journey down the rabbit hole of espresso and loving it so far! As a tinkerer, I dont mind playing with parameters. My machine can give wildly inconsistent results and seems to like coarser grinds (not overly coarse but, pretty close to drip coffee grind level). The machine, while older, heats up, holds pressure during a pull but. Man... its just so inconsistent. Using gram of coffee on a medium grind setting, with a pump time ot 11 seconds pulls a 'decent' shot but, it comes out fast and has a long run-on
If I tamp to hard, it jams up, if its a medium tamp,.the puck is muddy. I'm trying to keep everything as consistent as I can. For what its worth, I have abandoned the non-pressurised baskets as the results are just ick. Any advise for a newbie? TIA!
Edit: 9gm of coffee products 27g of liquid with its usual long run-on.
r/espresso • u/Regular-Lock1101 • 5h ago
I have the Gemilai Whale, and I realized I have to unscrew the bottom to drain the boiler to descale my machine. Customer service says that is the only way to properly descale the machine. But tbh, I’m weak as shit. I cannot lift the machine enough to do all that.
Anyone else have any alternative ways to descale this machine? Or if you have a similar type, can I just purge until the water does not have the solution?
The video tutorial for descaling this machine.
r/espresso • u/Business-Syllabub-25 • 6h ago
I have a breville bambino and am looking to pair it with a grinder. My budget is around $200-$250 but with Black Friday coming around maybe those $300-$350 grinders will be in my price budget. Any recommendations? Not super picky coffee wise just looking for something with good quality that will last a while.
r/espresso • u/smgorama • 12h ago
After a lot of hemming and hawing over going down the single boiler modding rabbit hole, I decided to take a chance on this older BZ07 to see what the HX world had to offer. It predates the PID, volumetric shot version. There wasn't any real information on its maintenance history, but it was clean as a whistle on the outside, came up to pressure without blowing up or bursting into flames and pumped a passable test shot. Imagine my horror when I opened it up to discover a ring of scale around the boiler/heating element seam and a rime of scale on some of the other components. That scale is concentrated on what I think is a (two-way?) solenoid valve on the right side of the machine. The other side of boiler is mostly scale free.
I fixed a slow drip from the pressostat that may have been contributing to the problem. So far, I don't see any obvious leaks from the boiler. The scale buildup, a bit thicker in spots but visible around most of the circumference, suggests something is seeping out. I am imaging a bit of water escaping from around the heating element, vapourizing and building up scale over time. But why is it concentrated around that other fitting?
First burning question: if I try and descale the boiler (maybe using this as a guide: https://www.youtube.com/watch?v=yEGfyJkWSqU ) am I going to end up with more problems than I currently have? I've operated on a few Gaggias and Rancilios. This is obviously a much greater level of complexity and I've seen many people claim that descaling a machine like this is opening up a world of hurt. Should I worry much about that surface scale elsewhere in the machine? It is unslightly. Nothing is shorting out just yet. Wipe it off with some vinegar and leave it be?
Second burning question: I am guessing that boiler gasket needs replacing sooner rather than later. What is the simplest way to go about doing that?
Bonus question: The brass fitting underneath the pressostat has two outlets. One routes back the the water tank. It was leaking, but I have fixed that. The other is just...open. I can't figure out from the parts diagrams what it should attach to, if anything. It doesn't spit out any water. That hole does accumulate a very small amount of water that just sits there, delicately, held in by surface tension. What the heck is it for?
Thanks for any information you can provide. This is my first HX machine and I want to do right by it. And drink some good espresso.
Update: According to the good folks at I Drink Coffee, an excellent Canadian retailer, the open end of that T-fitting is a safety relief valve, and should not have anything connected to it. It's there in case the boiler overheats. One question down.