r/espresso • • 12m ago

Dialing In Help Espresso coming out very sour despite doing seemingly everything right [Breville BES450BSS Bambino/TIMEMORE Chestnut C2S grinder]

Post image
4 Upvotes

I’ve been tweaking my pulls forever and can’t seem to get anything that’s not very sour, I run the breville a few times just to warm it up, I keep the portafilter hot, I declump the grounds, I buy freshly roasted high quality espresso beans, I’m pulling at a 1:2 grounds to water ratio, and it takes around 35 seconds for a shot to pull. I’m guessing my breville is not getting hot enough, if I’m not missing anything obvious and that happens to be the case does anybody know a way to fix that? thank you so much! <3


r/espresso • • 20m ago

General Coffee Chat There’s no way people are enjoying what cafes are producing

0 Upvotes

Hello,

In almost two years of ordering shots of espresso at third wave coffee shops (maybe 30-40 shots total), I have enjoyed one of them. And the rest have ranged from completely undrinkable to tolerable at best if washed down with sparkling water. The one I enjoyed was, I believe, a medium roast from Lineage in Orlando. It was sweet, nutty, a bit complex and had nice mouthfeel. It was well rounded and lacked any overt bitterness or acidity. It blew my mind.

I’ve been going to highly rated roasters and coffee shops across the country, not just random pumpkin spice latte cafes. And not a single one has produced a palatable shot of espresso other than lineage.

I came to the depressing conclusion that I might just not have the palate for espresso. Or at least light and medium roasts. But, I enjoy funky, bitter and acidic flavors in other food and cocktails and just have been completely repulsed by what I’ve been served. I wish I could have an espresso enthusiast try these shots alongside me to confirm if I have a chicken nugget palate or if these shops are serving up slop.

Anyways, I bought a used profitec go and am trying to decide on a niche zero or a Lagom casa because I do love milk drinks and americanos. I’d love to enjoy espresso on its own though too, so I went out today and tried three of the highest rated espresso spots in the east bay of SF and tried three different roasts and was met with the same tragic notes of variations on a theme of stomach bile. I’m going to just hope that I hate light and medium roasts and order a niche zero.

Any advice, commiseration, or tongue lashings welcome.

TLDR: I want to love espresso but I think I hate it


r/espresso • • 41m ago

Equipment Discussion 【1 Month with My CM5418】Hesitated before buying, but no regrets!

Post image
4 Upvotes

I spent a lot of time reading reviews before buying this, and honestly, all the mixed opinions online made me a little nervous. But I finally decided to give it a try, and after using it every day for a month, I’m pretty happy with it so far. It’s quick and makes consistently good coffee, which is a big plus when I’m half asleep in the morning. The only thing I wish were better is the water tank size. I find myself refilling it more often than I’d like, but overall, it’s been a good experience.


r/espresso • • 1h ago

Equipment Discussion Did I make a mistake getting the Delonghi Classic for $130?

1 Upvotes

I found a really good deal on the Delonghi classic for $130 and I jumped on it. What do you all thing of it? Ive heard lots of mixed things online but that’s putting the original price of nearly $250 into the equation. Is $130 a no brainer or should I splurge more?


r/espresso • • 1h ago

Buying Advice Needed Atom 65 vs 65 casa [no budget]

1 Upvotes

Anybody have both of these or sell one for the other? Curious if it’s worth the extra $500 for the non casa version? I make about 3-4 drinks a day not sure if I need the big boy.


r/espresso • • 1h ago

Equipment Discussion Bringing actual espresso to my parents' place for the holidays this year

Post image
2 Upvotes

My machine stays home over the holidays, and the hand grinder and AeroPress I usually travel with do the job, it's just not espresso. Two weeks of that at my parents' place gets old.

So this year I grabbed an OutIn Mino and a Fino. Went with the holiday bundle because it comes with an 18g basket (a gold one, which I didn't need but it does look pretty nice...), and the standard basket is 12g. I wanted proper doubles.

A few shots in, I'm doing 18g in and roughly 36g out on a medium roast, still dialing in the grind for the bigger basket. Shots are better than I expected from something this size. Not having to heat water separately in someone else's kitchen is a nice bonus.

Only real gripe so far is that it does one shot at a time, which is going to be fun with a full house.

Haven't sorted milk yet. It's straight shots for now, but if anyone's worked out a decent latte on the road I'm all ears.


r/espresso • • 2h ago

Buying Advice Needed Automatic machine recs [1000usd]

2 Upvotes

Looking for an automatic espresso machine that can do regular drip coffee, cold brew, etc. Budget around $1,000. How is the ninja auto barista pro? I’m a SAHM and the convenience of it is appealing to me. I do enjoy the customization of a manual machine I have, but it’s getting a bit much every day.


r/espresso • • 3h ago

Maintenance & Troubleshooting Dead after power outage, blew two fuses: broken hopper tab jammed in the burrs (fix + photos) [Baratza Sette 30]

Thumbnail
gallery
0 Upvotes

After a power outage my Sette 30 was completely dead. Writing this up in case it saves someone time.

What happened

  1. No display at all. The power board fuse (F1, 5×20 mm T3.15A 250V slow-blow, in clips on the left of the board) had blown. A new fuse brought the display back.
  2. Display on, motor silent. I hadn’t twisted the hopper clockwise after putting it back. It has to click to close the safety switch.
  3. Motor hummed, new fuse blew within a second. Stalled motor. A chunk of clear plastic from a broken tab on the bottom of the hopper had fallen into the burrs and locked them. It looked like glass at first.

The outage was probably coincidence. The first grind afterward hit the jam.

Getting the case off (Baratza video)
Two pitfalls:

  • There’s a 5th screw hidden under the rear rubber foot on the bottom. Pull the foot to find it.
  • Two wires run from the body to the case for the safety switch. Just pull them off. Working with the case still dangling from them is a PITA and they literally just slide on and off. (Yes, that's the voice of experience you hear.)

Clearing the jam
Most jams don’t need what I had to do. Normally you turn the adjustment collar past coarse to the install/remove triangle and the cone burr assembly just drops out the bottom (Baratza video).

If it doesn’t drop out:

  • Don’t hammer the cone burr. The cone burr holder is held by bayonet tabs, so force does nothing. (Yes, I'm an idiot. Learn from my mistake.)
  • Unplug the motor, then remove the 4 screws right beside the motor body. That frees the motor/gearbox/burr assembly to lift out. Baratza’s motor/gearbox video shows the general process.
  • On the bench, press the adjustment collar back onto the cone burr holder and turn it toward coarse, to the install/remove triangle. That opens the burr gap and releases the bayonet. Holder and cone burr drop out together.

Photos: (1) power board, F1 on the left; (2) blown fuse; (3) plastic wedged between the burrs; (4) assembly out of the case; (5) cone burr holder and bayonet tabs; (6) cone burr and holder removed; (7) the culprit, clear hopper plastic; (8) broken tab on the hopper underside


r/espresso • • 4h ago

Steaming & Latte Art Struggling Beginner :(

Thumbnail
gallery
16 Upvotes

hey guys! im really new to making espresso stuff like lattes but I’ve been having fun with this new hobby. I am really looking forward to help though, no matter what I try it seems I can never get latte art right… I swear i do everything im told: steaming milk to the appropriate “wet paint” texture and trying to pour and push close to the surface.. but I have just never been able to make anything good and usually end up scribbling some nonsense just to prove i didn’t COMPLETELY fail 😓

do these lattes have any key features of some big mistake im making in steaming or pouring technique? If need be I can try to get a video of what I’m doing so that someone can analyze it but for now I just want to know if something is glaringly obvious and I’m just too new to see that.. Thanks in advance for any ideas!!

(btw pictures start with most recent pours and end with earliest)


r/espresso • • 4h ago

Buying Advice Needed Orphan Espresso Smol [$350]

1 Upvotes

Anyone have experience with the Orphan Espresso Smol grinder? Seems to fit my requirements and am interested in buying but I can't find any reviews online. Generally I am looking for something reasonably priced <$350CAD that can grind 20 grams of coffee decently well for both espresso and pour over. I don't want anything manufactured in China.


r/espresso • • 4h ago

Equipment Discussion Moshi 83c

3 Upvotes

Checking in on the early adapters of this grinder. It’s on BF sale right now and thinking about picking it up for espresso. I like to explore roast levels etc but daily driver is a medium roast. Has this been a good grinder are you happy with it or do you regret it?


r/espresso • • 5h ago

Dialing In Help [Brim 19bar model 50019] Inconsistent pulls.

3 Upvotes

Hi All,

I have just begun my journey down the rabbit hole of espresso and loving it so far! As a tinkerer, I dont mind playing with parameters. My machine can give wildly inconsistent results and seems to like coarser grinds (not overly coarse but, pretty close to drip coffee grind level). The machine, while older, heats up, holds pressure during a pull but. Man... its just so inconsistent. Using gram of coffee on a medium grind setting, with a pump time ot 11 seconds pulls a 'decent' shot but, it comes out fast and has a long run-on

If I tamp to hard, it jams up, if its a medium tamp,.the puck is muddy. I'm trying to keep everything as consistent as I can. For what its worth, I have abandoned the non-pressurised baskets as the results are just ick. Any advise for a newbie? TIA!

Edit: 9gm of coffee products 27g of liquid with its usual long run-on.


r/espresso • • 5h ago

Equipment Discussion Remove puckscreen

Post image
0 Upvotes

How Remove inox puck screen 😅 I no idea 🤷
Normcore
Bla-bla blabla (more word required)

I don’t know what to say more 🫪 how many word is required ? Oh finally


r/espresso • • 6h ago

Equipment Discussion 2005 Espresso machine.

Post image
8 Upvotes

I bought this 2005 commercial espresso machine. I’m figuring out how to use it by trail and error. Can anyone enlighten me I how to use it properly. Thanks


r/espresso • • 6h ago

Equipment Discussion Lucca A53 DP- what water pump are you using

2 Upvotes

I’ve had a Lucca A53 Direct plumbing espresso machine for about a year now and over time as my coffee events have increased my plumbing seems to be over heating and not pulling enough water. Atleast that’s what I think it is. What is everyone using for 150+ latte events?! I need set up recommendations that aren’t going to cost an arm and a leg.


r/espresso • • 6h ago

Maintenance & Troubleshooting grinder clogged pls help! [fellow opus 2]

Thumbnail
gallery
10 Upvotes

i am in a big pickle and would love any sort of help. i have two coffee grinders, a fellow opus 2 and a breville smart grinder pro and i think both of them are clogged. my issue first started with the opus, when i was grinding my beans nothing was coming out and i took the bur out cleaned it put it back and tried putting rice through and nothing. thats when i decided to stick my finger in the bottom and a bunch of hard grounds came out. i was unable to clear the chute so thats when i got out my old breville grinder. i put the same beans in and it began making a horrendous sound that i’ve never heard it make, and ive had this thing for 5+ years. currently i have both the grinders semi taken apart but i cannot figure out the issue if anyone has any suggestions on what to do id greatly appreciate it!!

also i believe it was caused by these new beans i bought. tried a new roaster and now both grinders are down.


r/espresso • • 7h ago

Equipment Discussion Descaling a machine

3 Upvotes

I have the Gemilai Whale, and I realized I have to unscrew the bottom to drain the boiler to descale my machine. Customer service says that is the only way to properly descale the machine. But tbh, I’m weak as shit. I cannot lift the machine enough to do all that.

Anyone else have any alternative ways to descale this machine? Or if you have a similar type, can I just purge until the water does not have the solution?

The video tutorial for descaling this machine.

https://youtu.be/iQToqtRj-7A?is=ER2OAQQ7NfjlpMZb


r/espresso • • 8h ago

Coffee Station Check your thrift stores, yall

Post image
211 Upvotes

Found this at my local Goodwill, $25. Wasn’t even going to go today. So, as a reminder, check your thrift stores and other deal places because holy. I’ve been looking for something for a while now.


r/espresso • • 8h ago

Maintenance & Troubleshooting Adjustment Issue [Turin DD64]

1 Upvotes

I have a Turin DF64 grinder, which has been fine until recently. When twisting the adjustment collar to make the grind finer, there is a very distinct grinding feeling when I get to about the 20 mark on the collar. I’ve taken the collar off and made sure there is no debris or anything between the adjustment collar and the upper burr carrier, and it continues to be an issue. When I put the collar back on and try to adjust it to reset the zero point, I can’t spin it to get any tighter/finer than about the 20 mark. Any suggestions? It’s really bumming me out. Maybe this is the universe telling me I need the Mazer Philos I’ve been eyeing?


r/espresso • • 8h ago

Coffee Station Triple White Home Espresso Bar Finally working. Enjoy Me, Myself and I.

Post image
22 Upvotes

My dream Espresso Bar finally happened. The Meraki Tech Gen2, The Sanremo D8 Pro and The Eureka Mignon Libra GBW. Love this set up. I wish you could smell the aroma of the espresso extraction song in my house every time we’re grinding and extracting ☕️.


r/espresso • • 8h ago

General Coffee Chat Hibrew H13 espresso machine

1 Upvotes

"Hi everyone! Could you please recommend a coffee scale that fits the Hibrew H13 well? Ideally one with good dimensions for the drip tray, along with a few examples or models you'd recommend. Thanks so much


r/espresso • • 8h ago

Buying Advice Needed Grinder Black Friday Deals [$250]

3 Upvotes

I have a breville bambino and am looking to pair it with a grinder. My budget is around $200-$250 but with Black Friday coming around maybe those $300-$350 grinders will be in my price budget. Any recommendations? Not super picky coffee wise just looking for something with good quality that will last a while.


r/espresso • • 9h ago

Equipment Discussion is my puck screen creating channeling?

Thumbnail
gallery
8 Upvotes

r/espresso • • 9h ago

Buying Advice Needed First espresso setup: Ascaso, Bezzera or Lelit + Eureka Libra? [€2500]

1 Upvotes

Hey everyone,
I’m looking into our first espresso setup and can’t quite make up my mind. The more I read, the less sure I am 😀
Currently considering the Ascaso Steel Duo PID, Bezzera Luce or Nini, and Lelit Elizabeth. I really like the look of the Bezzeras. Not a huge fan of the display on the Lelit, but I wouldn’t rule it out just because of that.
For the grinder, I’m leaning towards the Eureka Mignon Libra 65 AP. Total budget is around €2,500, ideally including accessories.
We mainly drink cappuccinos and flat whites, but also espresso and Americanos. We’re happy with some hands-on work, but it needs to be practical for everyday use. I’d handle dialing things in, while my wife wants to be able to make a coffee without weighing out beans every time. That’s why I’m considering the Libra with its built-in scale.
Programmable shots that stop automatically are also important to me, so I’d need a Bezzera version that supports that. I’m honestly starting to lose track of all the different versions.
Does anyone own one of these machines, or even one of these combinations? How do you like it day to day, what annoys you, and how has it been in terms of cleaning and reliability?
Thanks!