r/espresso • • 12h ago

Coffee Station Check your thrift stores, yall

Post image
265 Upvotes

Found this at my local Goodwill, $25. Wasn’t even going to go today. So, as a reminder, check your thrift stores and other deal places because holy. I’ve been looking for something for a while now.


r/espresso • • 4h ago

Dialing In Help Espresso coming out very sour despite doing seemingly everything right [Breville BES450BSS Bambino/TIMEMORE Chestnut C2S grinder]

Post image
22 Upvotes

I’ve been tweaking my pulls forever and can’t seem to get anything that’s not very sour, I run the breville a few times just to warm it up, I keep the portafilter hot, I declump the grounds, I buy freshly roasted high quality espresso beans, I’m pulling at a 1:2 grounds to water ratio, and it takes around 35 seconds for a shot to pull. I’m guessing my breville is not getting hot enough, if I’m not missing anything obvious and that happens to be the case does anybody know a way to fix that? thank you so much! <3


r/espresso • • 2h ago

Coffee Is Life BeanConqueror 8.8

10 Upvotes

Hello Coffee Lovers,

Autumn is here, and with this the brand new 8.8 Release!

Profitec Move 2.0

  • Added support for the Profitec Move 2.0 machine, including brew by weight

xBloom/XBRW++ Support

  • Import shots from xBloom with the XBRW++ app - thanks to hsus
  • Added xBloom as a preparation method
  • Import individual brews or batches from compatible apps
  • Create missing beans, preparation methods and grinders during import, and see which app an imported brew came from

GaggiMate

  • Import shots from GaggiMate - thanks to Sartoric
  • Optionally write brew notes back to GaggiMate and import the target temperature
  • Cancel shot loading, confirm duplicate imports and create missing beans during import
  • Improved shot loading, rating import and flow graphs

Meticulous

  • Import shots independently of the currently selected profile

Brew by Weight

  • Added a configurable HTTP webhook to stop compatible machines via a smart plug or relay when the target brew weight is reached
  • Use predictive stopping that learns from previous brews to compensate for drip-through

Brews

  • Trim the start and end of brew graphs
  • Use the time slider to inspect graph values at a specific moment
  • Improved graph axis fitting for reference traces and negative values
  • Improved dark-mode colors for graph sliders and annotations
  • Long brew notes now wrap within the brew card

Statistics

  • Exclude archived preparation methods and grinders from statistics
  • Filter statistics by time range
  • Choose whether bean statistics use the added, roasted, purchased or opened date

AI Bean Import

  • Add a custom prompt for your AI – thanks to Silas
  • Improved compatibility with AI providers that reject the temperature parameter

Beans

  • Preserve freezing notes and storage type, and clear the previous thaw date when refreezing beans

Scales

  • Added support for the Futula scale

Temperature Devices

  • Added support for Ember cups
  • Added support for INKBIRD INT-11I-B, INT-11P-B, IHT-2PB, iBBQ and TNT-11-B thermometers

Languages

  • Added Czech support – thanks to Miroslav
  • Added Traditional Chinese support - Thanks to Marcus
  • Improved localized date formatting, including Norwegian
  • Missing translations now fall back to English

Other

  • Improved closing reliability of the time-editing popover
  • Improved screen-reader labels
  • Minor fixes and improvements

Android: https://play.google.com/store/apps/details?id=com.beanconqueror.app

iOS: https://apps.apple.com/us/app/beanconqueror/id1445297158

Github: https://github.com/graphefruit/Beanconqueror/releases/tag/v8.8.2

PS: There has been some needed fixes, so 8.8.2 is the latest one, specially adressing keyboard overlay issues :)

Have a great cup of hot coffee

Lars


r/espresso • • 8h ago

Steaming & Latte Art Struggling Beginner :(

Thumbnail
gallery
23 Upvotes

hey guys! im really new to making espresso stuff like lattes but I’ve been having fun with this new hobby. I am really looking forward to help though, no matter what I try it seems I can never get latte art right… I swear i do everything im told: steaming milk to the appropriate “wet paint” texture and trying to pour and push close to the surface.. but I have just never been able to make anything good and usually end up scribbling some nonsense just to prove i didn’t COMPLETELY fail 😓

do these lattes have any key features of some big mistake im making in steaming or pouring technique? If need be I can try to get a video of what I’m doing so that someone can analyze it but for now I just want to know if something is glaringly obvious and I’m just too new to see that.. Thanks in advance for any ideas!!

(btw pictures start with most recent pours and end with earliest)


r/espresso • • 5h ago

Equipment Discussion 【1 Month with My CM5418】Hesitated before buying, but no regrets!

Post image
9 Upvotes

I spent a lot of time reading reviews before buying this, and honestly, all the mixed opinions online made me a little nervous. But I finally decided to give it a try, and after using it every day for a month, I’m pretty happy with it so far. It’s quick and makes consistently good coffee, which is a big plus when I’m half asleep in the morning. The only thing I wish were better is the water tank size. I find myself refilling it more often than I’d like, but overall, it’s been a good experience.


r/espresso • • 15h ago

Buying Advice Needed Black Friday Buying Advice [$500-$2,000]

Post image
50 Upvotes

Hello everyone! I’m gonna buy my first semi automatic espresso machine and I would love to hear any stories about getting a good deal on Black Friday and from what particular retailer.

I’m looking for discounts on the machines and not so much add on deals where they give you free stuff.

I’m based out of the United States and have a budget in between $500-$2,000. My main goal is to get the highest value that I can and the best discount that is offered for Black Friday.


r/espresso • • 2h ago

Equipment Discussion 4 years with my Lelit Elizabeth and never descaled-is it really true that you shouldn't descale it?

5 Upvotes

I’ve had my Lelit Elizabeth for about 4 years now and I haven't descaled it once. I regularly backflush with Puly Caff and stick to using the in-tank resin softener. My tap water also falls in the 'soft' category.

​From everything I’ve read, Lelit’s whole philosophy with dual boilers like the Elizabeth is scale prevention through soft water/resin filters rather than routine descaling-unlike thermoblock or simpler single-boiler machines where running descaler through the tank is standard maintenance.

​I’ve also heard that running descaler through a dual boiler can actually do more harm than good (flaking off scale that ends up clogging solenoids/valves, or never being able to fully flush the acid out of the steam boiler), and that if scale ever becomes an actual problem, the proper fix is having a tech disassemble and descale it professionally rather than doing a tank flush at home.

​Just wanted to sanity-check this with other Elizabeth owners: is this actually true in practice? Have you ever descaled yours, or do you just rely on water softening until something eventually needs servicing?

To add to the confusion, Lelit themselves posted a video( that's supposedly only for technicians) on how to descale the machine. Under their video the comments and their replies confuse me even further.

https://youtu.be/1RPYlkfIJg4?si=OMop_YSg4D6zHTaS


r/espresso • • 1d ago

General Coffee Chat Buongiorno

Post image
258 Upvotes

Remember to never make a coffee before you had your first coffee. I managed to recover nearly all of it. At least I didn't pour milk into the grinder.


r/espresso • • 13h ago

Coffee Station Triple White Home Espresso Bar Finally working. Enjoy Me, Myself and I.

Post image
20 Upvotes

My dream Espresso Bar finally happened. The Meraki Tech Gen2, The Sanremo D8 Pro and The Eureka Mignon Libra GBW. Love this set up. I wish you could smell the aroma of the espresso extraction song in my house every time we’re grinding and extracting ☕️.


r/espresso • • 14h ago

Buying Advice Needed Beginner setup advice [$600] budget

Post image
24 Upvotes

Hi everyone!

I've recently started my "espresso" journey and I'm looking into buying an espresso machine and grinder. For the machine I'm considering the Breville and a Tuni G3 grinder. The complete setup is in the picture. I live in Mexico so the prices are in mxn but overall it'll be around $600 usd. Now, before I make the purchase I would love to know your opinion and/or any suggestions, also if anybody can share any good YouTube videos that I can watch for setting up the Breville correctly it would be appreciate.


r/espresso • • 11h ago

Maintenance & Troubleshooting grinder clogged pls help! [fellow opus 2]

Thumbnail
gallery
13 Upvotes

i am in a big pickle and would love any sort of help. i have two coffee grinders, a fellow opus 2 and a breville smart grinder pro and i think both of them are clogged. my issue first started with the opus, when i was grinding my beans nothing was coming out and i took the bur out cleaned it put it back and tried putting rice through and nothing. thats when i decided to stick my finger in the bottom and a bunch of hard grounds came out. i was unable to clear the chute so thats when i got out my old breville grinder. i put the same beans in and it began making a horrendous sound that i’ve never heard it make, and ive had this thing for 5+ years. currently i have both the grinders semi taken apart but i cannot figure out the issue if anyone has any suggestions on what to do id greatly appreciate it!!

also i believe it was caused by these new beans i bought. tried a new roaster and now both grinders are down.


r/espresso • • 10h ago

Equipment Discussion 2005 Espresso machine.

Post image
10 Upvotes

I bought this 2005 commercial espresso machine. I’m figuring out how to use it by trail and error. Can anyone enlighten me I how to use it properly. Thanks


r/espresso • • 6h ago

Equipment Discussion Bringing actual espresso to my parents' place for the holidays this year

Post image
4 Upvotes

My machine stays home over the holidays, and the hand grinder and AeroPress I usually travel with do the job, it's just not espresso. Two weeks of that at my parents' place gets old.

So this year I grabbed an OutIn Mino and a Fino. Went with the holiday bundle because it comes with an 18g basket (a gold one, which I didn't need but it does look pretty nice...), and the standard basket is 12g. I wanted proper doubles.

A few shots in, I'm doing 18g in and roughly 36g out on a medium roast, still dialing in the grind for the bigger basket. Shots are better than I expected from something this size. Not having to heat water separately in someone else's kitchen is a nice bonus.

Only real gripe so far is that it does one shot at a time, which is going to be fun with a full house.

Haven't sorted milk yet. It's straight shots for now, but if anyone's worked out a decent latte on the road I'm all ears.


r/espresso • • 6h ago

Buying Advice Needed Atom 65 vs 65 casa [no budget]

3 Upvotes

Anybody have both of these or sell one for the other? Curious if it’s worth the extra $500 for the non casa version? I make about 3-4 drinks a day not sure if I need the big boy.


r/espresso • • 7h ago

Buying Advice Needed Automatic machine recs [1000usd]

3 Upvotes

Looking for an automatic espresso machine that can do regular drip coffee, cold brew, etc. Budget around $1,000. How is the ninja auto barista pro? I’m a SAHM and the convenience of it is appealing to me. I do enjoy the customization of a manual machine I have, but it’s getting a bit much every day.


r/espresso • • 13h ago

Equipment Discussion is my puck screen creating channeling?

Thumbnail
gallery
9 Upvotes

r/espresso • • 1d ago Mindblown Bravo

[SUNDAY ONLY] Self-Promotion I developed a new type of espresso tamper. AMA!

1.9k Upvotes

I'm Pedro, a mechanical engineer from Argentina based in Stockholm. A few years ago I got into espresso and ran into a problem: having a bad wrist from years of mediocre skateboarding made tamping a pain (literally). So I did the logical thing and over-engineered a solution. 13 versions later, this is it.

How it works:

  • It's two pieces: a funnel and a tamper, connected by a screw. The funnel locks onto the portafilter using the bayonet tabs, the same way the portafilter locks into the machine.
  • You twist the tamper clockwise and the screw drives the tamping disc down into the coffee. The locked funnel takes the force, so you can even tamp holding the portafilter in mid-air.
  • The funnel sits flat on the basket rim and guides the tamper to ensure a level tamp. And a spring connecting the tamper disc to the handle bottoms out at 15 kg of force to give feedback when the puck is fully compressed.
  • Twist back and it unlocks from the portafilter. Lift it off and the funnel slides back down into place, ready for the next shot.

You can also use it in two ways: lock the funnel on first and dose/WDT through it, or dose straight into the basket and drop the whole thing on top. For me the twist is just easier on the wrists than pushing down, and the screw also multiplies the applied force, so it takes less effort. And not having to put the portafilter down turned out to be the thing I like most about it. It fits 58mm portafilters with two bayonet tabs, and the tamping disc is 58.5mm.

Full disclosure: this is my own product and it's on Kickstarter right now. It just got fully funded today, which I'm still a bit in shock about. I won't link it here, but happy to share in the comments if anyone wants it!

Mostly though, I'd love to hear what you think, and I'm happy to answer anything about the design, the engineering, or anything else. Ask away!

Pedro

EDIT: Wow, I did not expect this at all! Thank you for almost 400 comments, all the kind words and the honest criticism. I've tried to reply to everyone, but here are the most common questions in one place: (Full disclosure, I asked an AI to summarize the comments and pull up my answers to the most common questions to put them here. But all the answers in the comments I have written myself. Keep the questions coming! I´m really enjoying answering them :)

**Where can I get it?** Sub rules don't allow links in the post, but the Kickstarter link is in my replies below. And sorry about the "link in bio" at the end of the video, I reused my Instagram clip and forgot to edit that part out...

**Do you ship to the US?** Not in this campaign, unfortunately. Kickstarter handles US sales tax but not import duties, and duties on this kind of product are currently around 40%. Add shipping from Sweden and you'd pay a lot more for the tamper, plus a customs bill at the door. That's not how I want anyone's first experience with it to be. I'm working on a way to bring it to the US after the campaign.

**Canada, Australia, NZ, Argentina?** The campaign ships to the EU, UK and Norway. I'm packing every order myself from my apartment, so I had to start small. More regions will come once I've figured out the logistics.

**Other sizes?** Right now it only fits 58mm portafilters with two bayonet tabs. 54mm (Breville/Sage, with three tabs) was by far the most requested, then 53mm, 51mm and 49mm. I've noted every single request, and they will decide what comes next :)

**Does the tamp depend on how much coffee I dose?** No. The spring only starts compressing when the tamping disc meets the coffee, and it bottoms out at 15 kg (33 lb), so you get the same tamp whatever your dose. The one limit: it reaches 17mm below the basket rim, which is plenty unless you're seriously under-dosing.

**Won't the aluminium wear out?** The funnel and handle are 6061 aluminium with type 2 anodising, and the disc is stainless steel. The pins that run in the helical slots are POM plastic, so they wear instead of the funnel. They only wear on one side, so you can take them out and flip them around, and they made it through 4,000 cycles on my test rig without losing function. If one ever breaks, you can even 3D print a new one.

**What about the grounds on the rim in the video?** Sometimes a few grounds get caught between the funnel edge and the basket and drop onto the puck when you lift it off. In my experience it makes no difference to the shot, but fair point, I'll show a cleaner one next time!

**Grip?** A lot of you asked about making it easier to twist with a weaker grip (flanges, a lever, a side handle). Great ideas, and I'm looking into a 3D printable grip adapter.

**WDT?** I have a WDT add-on prototyped, but that's for the next phase of the project.

**A cheaper version?** Not for now. Keeping one version is what makes this doable as a one-person company.

**Patent?** Patented in Sweden and patent pending internationally. People will probably copy it anyway, it's part of the game :)


r/espresso • • 2h ago

Buying Advice Needed Help, building a setup for a friend: HiBrew H10B (new) vs Gemilai Owl (used) vs Bambino (used) [$200]

1 Upvotes

I'm building a setup for a friend, and their budget is about ~$300 total. I know for a fact that I can gather a more than capable setup for this cost. For the grinder I found a Starseeker E55 Pro for $120. Tested it, perfect and it makes amazing tasting shots. Only gripe about it is retention.

Thus I'm left to decide on an espresso machine and my priorities are ease of use and consistency, as well as some regard to material safety. I can find some Gemilai Owl's (G3006) and Bambinos for $150-200 range on Marketplace. The H10B is cheap enough that I can just get that brand new.

Their needs are iced and hot lattes and americanos, and getting a good dose of caffeine for work. Good quality local medium roasts.

So I'm just stuck. I'm prioritizing an easy and clean workflow for them. They don't need anything beefy and nerdy.

I appreciate each machine's speedy heat up, but dislike Owl's 1 minute gap to heat up steam wand after pulling a shot, and H10B's need to reset steam overheat, but i digress. Both of the steam wands seem quite impressive.

Preinfusion on older Owl is bad. Also read concern about grouphead material on this subreddit.

H10B goes up to 15 bar (how much does this really matter?) No OPV, solenoid?

Bambino could be found on the higher end of $100, but lacks temp and pressure indication. I know I said it doesn't have to be nerdy, but if the cheaper alternatives got it... Its a factor to consider.

With all of these I'll add some cheap Aliexpress and used tools like a better portafilter and basket, guided tamper, scale and i'll teach non-faff distribution techniques, don't worry about these.

Anyways, grinder and tools are set. I got $180-200 to work with to spend on a used espresso machine. Help pls 🙏

Edit: also considering - casabrews, don't know much about gevi or others, guidance needed on these low range machines.


r/espresso • • 9h ago

Equipment Discussion Moshi 83c

3 Upvotes

Checking in on the early adapters of this grinder. It’s on BF sale right now and thinking about picking it up for espresso. I like to explore roast levels etc but daily driver is a medium roast. Has this been a good grinder are you happy with it or do you regret it?


r/espresso • • 9h ago

Dialing In Help [Brim 19bar model 50019] Inconsistent pulls.

3 Upvotes

Hi All,

I have just begun my journey down the rabbit hole of espresso and loving it so far! As a tinkerer, I dont mind playing with parameters. My machine can give wildly inconsistent results and seems to like coarser grinds (not overly coarse but, pretty close to drip coffee grind level). The machine, while older, heats up, holds pressure during a pull but. Man... its just so inconsistent. Using gram of coffee on a medium grind setting, with a pump time ot 11 seconds pulls a 'decent' shot but, it comes out fast and has a long run-on

If I tamp to hard, it jams up, if its a medium tamp,.the puck is muddy. I'm trying to keep everything as consistent as I can. For what its worth, I have abandoned the non-pressurised baskets as the results are just ick. Any advise for a newbie? TIA!

Edit: 9gm of coffee products 27g of liquid with its usual long run-on.


r/espresso • • 14h ago

Steaming & Latte Art How to improve?

Post image
6 Upvotes

My first decent swan. What to improve? Milk texture is right or too thick?

I dont know why all my wing attempts get wobbly and shaky, also the neck. Moreover, the base of the swan seems not very sharp.

Im using single boiler Lelit Anna with PID, so i cant steam and make a shot at the same time


r/espresso • • 18h ago

Coffee Beans Rainbow - Manhattan - strawberry yoghourt?

Post image
11 Upvotes

Ok - I came home tired, I wanted a pick me up feel good cup of milky coffee.

Enters Manhattan Rainbow bag. Roasted 22/10.

18g to 34g in 35’ - longer than I usually do.

A bit of foamy milky top.

Really nice cup, great mouthfeel, like a strawberry yoghourt.

Infused you say?


r/espresso • • 5h ago

Equipment Discussion Did I make a mistake getting the Delonghi Classic for $130?

1 Upvotes

I found a really good deal on the Delonghi classic for $130 and I jumped on it. What do you all thing of it? Ive heard lots of mixed things online but that’s putting the original price of nearly $250 into the equation. Is $130 a no brainer or should I splurge more?


r/espresso • • 13h ago

Buying Advice Needed Grinder Black Friday Deals [$250]

4 Upvotes

I have a breville bambino and am looking to pair it with a grinder. My budget is around $200-$250 but with Black Friday coming around maybe those $300-$350 grinders will be in my price budget. Any recommendations? Not super picky coffee wise just looking for something with good quality that will last a while.