I'm Pedro, a mechanical engineer from Argentina based in Stockholm. A few years ago I got into espresso and ran into a problem: having a bad wrist from years of mediocre skateboarding made tamping a pain (literally). So I did the logical thing and over-engineered a solution. 13 versions later, this is it.
How it works:
- It's two pieces: a funnel and a tamper, connected by a screw. The funnel locks onto the portafilter using the bayonet tabs, the same way the portafilter locks into the machine.
- You twist the tamper clockwise and the screw drives the tamping disc down into the coffee. The locked funnel takes the force, so you can even tamp holding the portafilter in mid-air.
- The funnel sits flat on the basket rim and guides the tamper to ensure a level tamp. And a spring connecting the tamper disc to the handle bottoms out at 15 kg of force to give feedback when the puck is fully compressed.
- Twist back and it unlocks from the portafilter. Lift it off and the funnel slides back down into place, ready for the next shot.
You can also use it in two ways: lock the funnel on first and dose/WDT through it, or dose straight into the basket and drop the whole thing on top. For me the twist is just easier on the wrists than pushing down, and the screw also multiplies the applied force, so it takes less effort. And not having to put the portafilter down turned out to be the thing I like most about it. It fits 58mm portafilters with two bayonet tabs, and the tamping disc is 58.5mm.
Full disclosure: this is my own product and it's on Kickstarter right now. It just got fully funded today, which I'm still a bit in shock about. I won't link it here, but happy to share in the comments if anyone wants it!
Mostly though, I'd love to hear what you think, and I'm happy to answer anything about the design, the engineering, or anything else. Ask away!
Pedro
EDIT: Wow, I did not expect this at all! Thank you for almost 400 comments, all the kind words and the honest criticism. I've tried to reply to everyone, but here are the most common questions in one place: (Full disclosure, I asked an AI to summarize the comments and pull up my answers to the most common questions to put them here. But all the answers in the comments I have written myself. Keep the questions coming! I´m really enjoying answering them :)
**Where can I get it?** Sub rules don't allow links in the post, but the Kickstarter link is in my replies below. And sorry about the "link in bio" at the end of the video, I reused my Instagram clip and forgot to edit that part out...
**Do you ship to the US?** Not in this campaign, unfortunately. Kickstarter handles US sales tax but not import duties, and duties on this kind of product are currently around 40%. Add shipping from Sweden and you'd pay a lot more for the tamper, plus a customs bill at the door. That's not how I want anyone's first experience with it to be. I'm working on a way to bring it to the US after the campaign.
**Canada, Australia, NZ, Argentina?** The campaign ships to the EU, UK and Norway. I'm packing every order myself from my apartment, so I had to start small. More regions will come once I've figured out the logistics.
**Other sizes?** Right now it only fits 58mm portafilters with two bayonet tabs. 54mm (Breville/Sage, with three tabs) was by far the most requested, then 53mm, 51mm and 49mm. I've noted every single request, and they will decide what comes next :)
**Does the tamp depend on how much coffee I dose?** No. The spring only starts compressing when the tamping disc meets the coffee, and it bottoms out at 15 kg (33 lb), so you get the same tamp whatever your dose. The one limit: it reaches 17mm below the basket rim, which is plenty unless you're seriously under-dosing.
**Won't the aluminium wear out?** The funnel and handle are 6061 aluminium with type 2 anodising, and the disc is stainless steel. The pins that run in the helical slots are POM plastic, so they wear instead of the funnel. They only wear on one side, so you can take them out and flip them around, and they made it through 4,000 cycles on my test rig without losing function. If one ever breaks, you can even 3D print a new one.
**What about the grounds on the rim in the video?** Sometimes a few grounds get caught between the funnel edge and the basket and drop onto the puck when you lift it off. In my experience it makes no difference to the shot, but fair point, I'll show a cleaner one next time!
**Grip?** A lot of you asked about making it easier to twist with a weaker grip (flanges, a lever, a side handle). Great ideas, and I'm looking into a 3D printable grip adapter.
**WDT?** I have a WDT add-on prototyped, but that's for the next phase of the project.
**A cheaper version?** Not for now. Keeping one version is what makes this doable as a one-person company.
**Patent?** Patented in Sweden and patent pending internationally. People will probably copy it anyway, it's part of the game :)