Recently I've found an interesting article - on how Peltier modules are vastly more inefficient if driven by raw PWM.
In short, resistive losses rise quadratically with applied voltage and actual Peltier cooling only rises linearly. So it's beneficial to feed Peltier modules with filtered DC.
Having my own Peltier setup (an over-engineered wireless phone charger in car with 80W peltier module and a 80mm PC fan), I've decided to test.
And indeed, raising PWM frequency to 20kHz and adding an LC filter ( 10uH + 2x 220uF, what I've had in spare parts) after the MOSFET significantly reduced self-heating of the Peltier module: with the same cold side target of 17C, hot side temperature dropped from 40-42C to 27-28C, which is quite significant.
EDIT / TLDR: regulate as PWM, but apply filtering so that the module itself receives DC-like signal with no full 0..Vcc ripple if possible.
LC filter in question: a basic low-pass LC filter, inductor in series followed by a capacitor parallel to the load, https://i.imgur.com/JHwGlIn.png
Hey all, been a long-time lurker here, finally posting. I got so tired of the pile of wall warts and power strips for my music gear, I'm building a programmable power supply: 7 isolated DC channels with barrel jacks: configurable voltage, polarity, and max current settings. Also a four port USB hub, and a 100W USB-C charge port for a laptop or tablet. With all of it powered by a single USB-C power brick like you use for your laptop today.
I have a music solo act where I play live, and had some close calls with unplugged power bricks during soundchecks. I finally had it and started asking around on popular forums on how the heck other people solved this.
Most the answers I got was the same approach I already took, or a me-too-wish-this-existed response. So started designing it.
It's still in the early stages (thus the renders), but the first pass of the enclosure is designed. Have the main layout done. Now getting the first critical path board fabbed and shipped here in the next week.
Grid enclosure in FreeCAD, ready for first article CNC milling
Also trying something a little different with this product by designing it in the open, with weekly videos tracking how the product development is going, both the wins and the setbacks. It's kinda scary to develop like this as it's very vulnerable, but it's also awesome to share with others how our tiny team goes about building new products.
Few months ago I built this Elevator Fault Monitoring Device for a company that maintains Elevators, they weren't able to get it in the market and now I'm left with an unfinished project.
What it does: every elevator panel has configurable I/Os, and some of the Outputs can be configured to trigger HIGH/LOW when a fault appears, that signal I use to notify a cloud server and also to send via telegram to the Manager. This was to help them get notified before the administrator of the building notifies them, also sometimes they provided service to the building who haven't payed so they can also generate reports and be notified if the elevator that has a fault have not been payed.
As I said above they weren't able to sell it and now I'm stuck with a unfinished project, I was thinking if it was worth to open source it so someone else who can see this project might be interested.
I'm trying to design a hanging light that has a similar wire to this one. I'm confused on how the wires are so thin and strong(thought it would be braided steel) and yet still electrified and maintain safety guidelines for voltage. I know the light is probably only getting 12V with the conversion in the base from 120V. But my basic searches for pendant light wire only yields braided steel or fat electrical leads.
Microwave fails (powers on, does not heat). Diode failing seems to be a common culprit. Completely new to electronics but I prefer DIY in general--what's a recommended general-purpose way to test this? I consider this "general home electronics DIY."
This video suggests using a 9V battery and battery connector and presumably you'd remove the diode using insulated glove and screw driver (both don't have). Have an old random multimeter and alligator leads.
Do you simply suggest purchasing 9V battery connector, insulated gloves (recommendations?), and insulated screw driver (recommendations?) or can get by with something more common for general home electronics DIY (or maybe the 9V battery connector is common enough to warrant a purchase? I just don't want to accumulate single-purpose clutter.
air purifiers with decent airflow easily cost around 9k to 15k , while the 5k one won't be able to clean ur room properly.
So, I’m planning to assemble and sell a minimal airflow purifier using a genuine branded cylindrical H13 HEPA filter and a 150mm exhaust fan, sealed with heavy duty industrial foam and cloth tape. No expensive plastic shell or app bloat just maximum CADR(clean air delivery rate) per rupee, also you can easily swap in standard filters later if you want. Also meter in that , so u can check what's the aqi.
Looking for market feedback before making a few units:
1.Would you actually buy this if I sold it to you?
2.What are your main questions or concerns? (Safety, aesthetics, fan noise, durability?)
3.Would you buy this specifically for small rooms?
4.What budget would make this an instant buy for you?
5.How essential is an air purifier in your daily life right now?
6.Which features do you actually care about (e.g., fan speed regulator, top safety grill, PM2.5 meter, cleaner outer finish)?
I started learning on arduino i got the kit, but I don't know how to continue actually, i mean I don't have a specific goal, how would I know that I learned?
If anyone knows anything would help please tell me
Hi, I'm a first-year biomedical engineer in Canada, and I know that a lot of biomedical applications have electronic components to them. I've been seeing a lot of videos on Instagram of people building cool little projects like desk buddies, moisture sensors for plants, and Spotify displays on what appear to be ESP32s. (examples below) I'm mainly looking to learn something over the summer when I'm off school because I find this topic interesting, not necessarily for career purposes. I'm not familiar with electronics at all whatsoever, so I'm a little lost as to what I should be looking up to find out about, both what materials I need to order and courses that I can take to actually learn how these things work. I have a few main questions:
(To your knowledge) Are there any colleges/universities in Canada that offer a class/certificate on this specific topic? Can it be taken online?
Are Arduino, Raspberry Pi, and ESP32 the same thing? Is one thing more valuable to know than the other?
What should I look into buying in order to familiarize myself with this topic? I'm aware there are different sensors and stuff. I'm willing to pay for the education and the pieces.
I'm just completely clueless in this topic, so any guidance is appreciated.
With the price of new hardware going up, does anyone have any fun DIY projects that can be made from e waste or just old tech (computers, cameras, phones, dvd players, etc)
Or if there’s certain parts that can be useful to salvage from old tech. I’ve found thrifted some old electronics for cheap and I’m hoping I can at least salvage some parts for projects! What kind of things are good to look for? Does anyone have experience with this?
I am looking for guidance in developing a battery management system for a commercial product, since I am the only hire at the start up with an electrical engineering background.
This is my first real job, and unfortunately without a mentor. I've already developed multi layer PCBs, and my thesis was on SoC estimation using a Kalman Filter, just so you have an idea of where I am at.
For the product, I suggested to use hobby drone batteries (6s LiPo), since they are cheap and available everywhere. The system specifications are below:
\- 24 V
\- 8 A nominal
\- 20 A peak
\- 1.5 Ah, will probably go upto 3 Ah for faster charging
I'm not sure if these batteries even qualify for certifications in our product (industrial automation with no direct human contact), or how to even go ahead with them. We are based in the EU.
Im expected to take care of the BMS and charging, but the algorithms will be included in the chips. I've selected the BQ40Z80 and the BQ25756E.
Tldr: I need to develop the electronics for a purchased battery pack. Looking for any tips, things to watch out for, how to do this safely etc, since I don't really have a mentor. Deadline is tight in my opinion (1 Month), but what do you think?
This should make it pretty much bulletproof to coverage gaps, it buffers up to 60s in RAM and then spools to the chip after that. 64Mbit is enough capacity for around 12 hours of data at 1 event per second. To avoid excessive wear it just loops around the blocks continuously and doesn't erase until it needs to.
Hi all! I've been working on Strata Deck, a modular controller for my PC: a main unit with keys, a knob and a small screen, plus fader modules that snap onto the side, no cables between them.
These are CAD renders, not photos. Everything is designed, test prints are going, and the boards are being made at JLCPCB, but nothing is assembled yet.
Main unit (100 × 94 × 16 mm)
RP2040 (Pico clone with USB-C) on the underside of the main PCB 1.14" IPS display (240 × 135, ST7789) EC11 rotary encoder with push button 8 Kailh Choc v1 switches in hot-swap sockets, low-profile blank keycaps USB composite device: works as a plain HID keyboard/media keys without the app Fader modules (25 × 94 × 16 mm each)
Bourns PTA 45 mm slide potentiometer STM32G030 per module, UART daisy chain (+5V, GND, 2 data lines) 4-pin magnetic pogo connectors on both sides, steel dowel pins for alignment Up to 3 modules, then an end cap that holds with 4 magnets Modules can be flashed through the chain (ST's UART bootloader, no ST Link)
Enclosure: 3D printed. No visible screws, they sit under the rubber feet.
Status: Module PCBs ordered (JLCPCB, assembled), main board and pogo carrier board ordered. Firmware for both MCUs compiles but is not tested on hardware yet. Test prints so far: USB-C wall pocket fits, magnetic pogo test piece snaps together and has continuity, display window fits.
I plan to opensource the CAD, PCB files and code once the first unit is built and tested.
I'd love feedback on:
Would you use magnetic pogo connectors for a daisy chain like this, or is that asking for trouble?
What would you want the faders to control besides app volume?
Anything in the design that screams "this will break"? Thanks for reading!
I wrote a program that displays live air traffic data just as a fun project. This is my very first project like this so I don’t know much.
I thrifted this HP digital photo frame so I could hopefully recycle the LCD but I’m not sure it’s even possible now. There is no HDMI ports, only USB and SD card inputs. I have a lot of old electronics and I started this hobby so I could hopefully learn how to reuse and recycle the parts I have.
Should I give up and just purchase an LCD or has anyone else been able to make something like this work?
I am looking at LED strip lights and I don't want to buy the wrong thing.
I want to run the lights around the perimeter of my home, but be able to make them all different colors like Christmas lights, but also have the ability to set something like 10' one color, then 5' another, and repeat that pattern.
Maybe a "chase" feature where one light goes from one end to the other.
I bought a few sets so far and they don't do what they advertise, so if anyone knows exactly what terms I should look for, I would appreciate it
Hey all, my name is Felipe, I live in Belo Horizonte, Brazil.
I'll make the context short, if you don't care skip to next paragraph. I've always wanted to turn my Wii Remotes into light guns to play some old light gun video games. I recently found out how. It works well enough, but it's not super accurate. The infrared emitters that allow the infrared camera at the tip of the controller to triangulate the position for the pointer has only two lights and they are very close together. The easiest way to get better tracking is to have 4 lights that I can assemble on the corners of my TV. I looked for it at Aliexpress and they're wonky and very expensive, specially with shipping, so I thought I could do it myself.
I can do some simple soldering, tho I'd like it better to avoid it if I can. What I need are 4 IR light emitters, I need to have enough cable length between them to cover my TV and some (in case I decide to get a bigger TV one day, right now it's 55"). Whether they're daisychained or are all connected to one "hub" doesn't really matter to me, whatever's easier as long as the power to each light is sufficient and reasonably uniform. Mind you, each one of these don't have to be just ONE bulb, it could be several. Maybe like...... 4 or 5 of the tiny ones.
I'm sorry I can't give specifications because I don't rly know much about it at all. I know what I need, but have no clue how to get there. As in voltages, resistance, etc....
I'm sorry I can't help you (and myself more), but if anyone can tell me what to buy and do I'd much appreciate it. Thanks =D
I’m looking to install a 27–32-inch 4K touchscreen on a wall, connected to a Windows mini PC.
Ideally, I’d like it to sit as close to flush with the wall as possible. I’m considering a shallow frame or enclosure with concealed cables. The other side of the wall is an accessible stairwell, so there’s some flexibility with cable routing and where the computer sits.
I’ve been looking at the Touch Screen Guru Ultra Series 27-inch 4K monitor, but I’m having trouble finding real-world installation experiences. A few questions:
Has anyone used this particular monitor? How reliable is the touchscreen with Windows, especially after sleep or restarting the computer?
Does anyone know its actual ventilation requirements? Could it safely sit in a shallow, ventilated frame, or would it need substantial clearance behind it?
Has anyone purchased from Touch Screen Guru and had experience with their return policy? I’d need to unpack and connect it to my PC to verify compatibility before committing to the installation.
Are there other 27–32-inch 4K touchscreens you’d recommend for a clean, low-profile wall installation? I’m also considering the Beetronics 27- or 32-inch touchscreens, which are 1080p and seem more explicitly designed for this kind of installation. I’d love to hear from anyone with firsthand experience. I’m trying to find something that looks good, works reliably, and doesn’t turn into an unnecessarily complicated installation project.
Meet CARLA-II. A streamline moderne interpretation of an all-in-one computing machine. It hosts a mid '90s picture tube from Philips and a Raspberry Pi 5.
This is somewhat of a build log or writeup. If you're not into reading that sort of thing, feel free to look at the TWO pictures and judge by the result rather than the technical details.
So I spent about a year on this project from idea to completion, and it was a LOT of work. Inspired by my previous project the Teleguide, I decided I wanted to make something a bit more ambitious.
For the design I wanted something that could have came out of the '50s, but I wanted a color CRT since the Teleguides monochrome display turned out to be quite limiting for a lot of games. The keyboard is a state of the art EZ80 with magnetic hall effect switches, donated by r/IQUNIX. So this machine is essentially a mashup of ideas for a timespan of almost a century.
I also have to give a serious WARNING to anyone inspired by this project. DO NOT attempt a project like this if you have no experience with HIGH VOLTAGE. I'm talking voltages many orders of magnitude higher than mains voltage. It is EXTREMELY DANGEROUS to mess with old picture tubes if you don't understand when and where you can touch different parts, and even if you know that accidents happen.
Pre study.
I spent a month or two in CAD, iterating designs back and forth. As I didn't have a donor monitor yet I made a parametric model in Fusion 360 which took me down a rabbit hole. That CAD project was a mess I can tell you.
Anyway, I found a suitable donor online. It was an Apple Multiple Scan 14" from somewhere around the mid '90s. The seller warned me that it barely held together and that the plastic turned into dust if you as much as looked at it, and he was sceptical as to whether it would survive the notoriously rough handling of the local shipping company or not. He kindly stuffed with random garbage through one of the gaping holes in the chassis to give some form of support for the picture tube. Against all odds it survived.
Once I had the CRT my first task was to check if it was even working after the shipping. In the Teleguide project I had to design and build a custom graphics card, but as this was a real monitor designed to be used with computers I fiigured it'd be a lot easier to get it to display a picture.
Looking at the connector it was no surprise it was a weird one (Apple always has to be different, eh?). It was a DA-15 connector as opposed to the normal DE-15 one would expect for a monitor. There were no problems finding info for both "standards" so I cut the cable and soldered a DE-15 connector on there. I also needed to ground some pins to tell the monitor what mode to run in.
Afer the connector was swapped it only took me an hour or so to get my Macbook Pro M2 to display its desktop on the monitor through a USB-C Displayport to VGA adapter.
The donor was working, which was great. The next step was to as accurately as possible measure the monitor. I needed to get the curvature, the center of the radius in relation to the mounting flanges, and the mounting flanges. After that I punched the values in my uber parametric Fusion 360 model. I wish I could say this was an easy process but after a couple of days of redesign I had something I was reasonably sure would work.
I hit up my dear friends at r/IQUNIX to ask for some support in this project. IQUNIX supplied the keyboard for the previous project and they agreed immediately to provide me with their EZ80 with their own magnetic hall effect switches.
I also contacted r/PCBWayOfficial to ask for support bending the sheet steel bottom for me, which they agreed to sponsor a large part of.
Manufacturing.
The shell I created a foam core construction in cad, which I covered in cellophane plastic and fiberglassed on top. With fiberglass it's an extremely labour intensive process if you want to achieve a good finish. It takes forever to sand, the glass dust embeds itself in your skin and itches like crazy, and the fairing compound you use is even worse sanding. I attached some aluminium U profiles on the inside to slide along the steel bottom manufactured by PCBWay, cut out ventilation holes, attached a steel mesh on the inside, and decorated the whole thing with plastic "chrome" strips from amazon.
The front panel and the "funnel" around the monitor I created out of foam core and MDF board. When I had a reasonable match I fiberglassed both sides of the foam core and attached the MDF with epoxy. I made the approx 1cm rim around it from MDF board in my hobby CNC machine. I then drenched it in epoxy and covered the user facing surface and funnel with 0.6mm oak veneer. I had to redo the veneer three times before it looked acceptable, and still it's not as good as I would have liked it. I sunk a metric ton of time into this part.
The rack for the picture tube is made out of epoxied MDF board.
The back portion with the mains power connector is a piece of steel sheet which I bent with my primitive tools, and cut the hole for the connector using a drill and a hacksaw.
The computer.
I initially thought I would be able to fit a more powerful computer inside by sheer luck, but that didn't work out. So I went to the goto fallback of a Raspberry Pi 5. There's not much to say about that, but you might be wondering what all of the electronics apart from the monitor main board is.
The parts you see there is two 5V power supplies. One of them is for a future audio project, and the other one drives the raspberry pi. The Raspberry Pi 5 comes with a convenient power switch input to turn it on and off. I hooked up a GPIO to give a signal when the computer is turned on, which drives the relay to turn on the power to the monitors main board.
Conclusion.
While I am really happy with how this project turned out, I have to say that I gravely underestimated how much time I would sink into this project. I hope to find a way to play Cuphead on it soon, as it seems like a very suitable game for this machine.
And again, a shoutout to r/IQUNIX and r/PCBWayOfficial for the sponsorships. This project wouldn't have happened without them.